hama 00184100 Spirit Calypso Bluetooth Headphone Instruction Manual

: June 6, 2024
: Hama

hama 00184100 Spirit Calypso Bluetooth Headphone

Operating Instructions

Take your time and read the following instructions and information completely. Please keep these instructions in a safe place for future reference. If you sell the device, please pass these operating instructions on to the new owner.

Controls and Displays

+ key
– key
Extra bass
Multi-function key (MFB)
Status LED
Audio input (3.5 mm)
Micro-USB connection
Microphone

Package Contents

1 “Spirit Calypso” Bluetooth® over-ear stereo headphones
1 x micro-USB charging cable
1 x quick guide
1 x warning and safety instructions

Safety Instructions

The product is intended for private, non-commercial use only.
Use the product only for the intended purpose.
Children should be supervised to ensure that they do not play with the product.
Do not use the product in areas in which electronic products are not permitted.
Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.
Do not open the device or continue to operate it if it becomes damaged.
Do not bend or crush the cable.
Do not drop the product and do not expose it to any major shocks.
Dispose of packaging material immediately in accordance with the locally applicable regulations.
Do not modify the product in any way. Doing so voids the warranty.
Protect the product from dirt, moisture and overheating and use it in dry environments only.
Do not use the product in the immediate vicinity of heaters, other heat sources or in direct sunlight.
Only use the article under moderate climatic conditions.
As with all electrical products, this device should be kept out of the reach of children.
Do not operate the product outside the power limits specified in the technical data.
Do not use the product in a damp environment and avoid splashing water
While driving a car or using sports equipment, do not allow yourself to be distracted by your product and keep an eye on the traffic situation and your surroundings.
The battery is permanently installed and cannot be removed; dispose of the product as a whole in accordance with the statutory regulations.
Do not incinerate the battery or the product.
Do not tamper with or damage/heat/disassemble the batteries/rechargeable batteries.
Do not use the product during the charging process!

Warning – Rechargeable Battery

Only use suitable charging devices or USB connections to charge the product.
Do not use defective chargers or USB ports and do not attempt to repair them.
Do not overcharge the product or allow the battery to completely discharge.
Avoid storing, charging and using in extreme temperatures and at extremely low atmospheric pressures (such as at high altitudes).
Charge regularly (at least quarterly) during periods of prolonged storage.

Warning – Magnets

This product generates magnetic fields. Persons with a cardiac pacemaker should consult a doctor before using this product, as the pacemaker’s proper function could be affected.
Do not store bank or similar cards with magnetic strips near the charging box or earphones. The data on the cards could be damaged or completely deleted.

Warning – High Volume

High sound pressure!
There is a risk of hearing damage.
To prevent any loss of hearing, avoid listening at loud volumes for prolonged periods.
Always keep the volume at a sensible level. Loud volumes, even over short periods, can cause hearing loss.
Using this product limits your perception of ambient noise. For this reason, do not operate any vehicles or machines while using this product.

Switching On / Off

ON – Press the MFB key (4) for approx. 3 seconds until the announcement “Power ON” is heard and the LED (5) flashes blue.
OFF – To switch off, press the MFB key (4) for approx. 5 seconds until the announcement “Power OFF” is heard, the LED (5) flashes red and then goes out.

Switching ON OFF

Note – Automatic Switch-off of The Headphones
The headphones are equipped with an automatic switch-off mechanism. If there is no connection to your device within 3 minutes, they switch off automatically.

Charging

Fully charge the headphones once before using them for the first time.

Switch off the headphones and connect them
Ensure that the headphones are switched off before charging them.
Connect the USB charging cable included to the charging socket (7). Connect the free plug on the micro-USB charging cable to a suitable USB charger. To do this, consult the operating instructions for the USB charger you are using.
Charging process for the headphones
The LED (5) lights up solid red during the charging process. Once the charging process is complete, the LED (5) goes out.
It can take up to 2.5 hours for the battery to be fully charged.
Battery capacity
When the headphone battery capacity is low, the LED (5) flashes red and the announcement “Battery Low” is heard.
Note
During the charging process, the Bluetooth® connection is automatically disconnected.

Bluetooth® Pairing

Note – Pairing

Make sure that your Bluetooth®-capable device is switched on and that Bluetooth® is activated.
For more information, please refer to the operating instructions of your device.

The headphones and the device should not be more than 1 metre apart. The shorter the distance, the better.
Switch the headphones on using the MFB key (4).

Check the status of the status LED (5) and the announcements
If the LED (5) is flashing alternately and the announcement is:
Headphones searching for a Bluetooth® connection.
If the LED (5) is flashing and the announcement is:
Headphones already paired with a Bluetooth® device.
Search using your device for the headphones (only required on the first connection)
Open the Bluetooth® settings on your device and wait until the list of found Bluetooth® devices shows Hama Spirit Calypso.
Select Hama Spirit Calypso and wait until the headphones are shown as connected in your device’s Bluetooth® settings.
Note – Bluetooth® Password
Some devices require a password in order to connect to another Bluetooth® device.
- If your device requests a password to connect to the headphones, enter 0000.
Multi-point Technology
These headphones can connect to two Bluetooth®-enabled devices simultaneously (multi-point).
- First connect the first device to the headphones.
- Then deactivate the Bluetooth® function on this device.
- Then connect the second device to the headphones.
- Activate the Bluetooth® function on the first device again. The headphones then connect to this device too.
Disconnecting the Bluetooth® connection
Disconnect the headphones via your device’s Bluetooth® settings.
**Alternative:

**

Controls

Note

Please be aware that your terminal device must support some functions if they are to be used.
For more information, please refer to the operating instructions of your device.

Voice Assistant Function

Press and hold the BASS button (3) for around 2 seconds to initiate communication with Siri or the Google Assistant. As soon as you hear a signal tone, your voice assistant is ready to assist you.

Note – Siri
Siri is only available on suitable devices running iOS 5 (iPhone 4s or later) or higher.

Note – Google Assistant

The Google Assistant is only available on suitable devices running Android 5.0 or higher with Google Play Services, >1.5 GB of free memory and a minimum screen resolution of 720P.
The Google Assistant App must be available on your device and be set as the default voice assistant.

Additional Bass Amplification

Note
Please note that this function is only possible when a Bluetooth® connection is active.

These headphones are equipped with an extra bass function to amplify the bass effect. Press the Bass (3) key to switch on this function while playing music. To switch this function off again, press the Bass (3) key again.

Hands-free Function

It is possible to use the earphones like a hands-free facility for your mobile phone.

Make a call
Dial the number directly via your device to make a call.
Accept a call
Press the MFB key (4) to accept an incoming call.
Reject a call
Press and hold the MFB key (4) for around 2 seconds or use your device to reject an incoming call.
End a call
During the call, press the MFB key (4) once to end the call.
Last number redial
Press the MFB key (4) twice to redial the last number.

Note
The “Last number redial” function is only available for the device which was paired first in a multi-pairing situation.

Audio Playback

Note
Please note that this function is only possible when a Bluetooth® connection is active.

Start playback on your device.
Play / Pause
Press the MFB key (4) once to pause or start audio playback.
Next Track
Press and hold the + key (1) for around 2 seconds to skip to the next track.
Previous Track
Press and hold the – key (2) for around 2 seconds to skip to the previous track.

Volume Control

Increase Volume
Press the + key (1) once to increase the volume. Once the maximum volume is reached, the announcement “Maximum volume” is heard.
Reduce Volume
Press the – key (2) once to reduce the volume. Once the minimum volume is reached, you will hear “beep beep”.

Audio playback via an audio cable

(Not included in the package contents)
In addition to the connection via Bluetooth®, you can also connect these headphones using an AUX cable. To do this, plug one end into the device and the other end into the audio input (6). When the audio cable is inserted, the Bluetooth® connection is automatically disconnected. The headphones now function like cabled headphones.

Technical Data

Bluetooth ® Headphones

Impedance Headphones / Microphone|

32 Ω / < 2 .2 kΩ

Frequency Headphones / Microphone|

20 Hz – 20 kHz / 100 Hz – 10 kHz

Sensitivity Headphones / Microphone|

100 dB / -42 dB

Range|

Max . 10 m

Bluetooth ® Technology|

v5 .0 + EDR

Profiles|

HFP V1 .6 / A2DP V1 .3 / AVRCP V1 .5

Transmission Frequency|

2 .4 – 2 .48 GHz

Rechargeable Battery|

Li-Po 3 .7 V

Battery Capacity|

500 mAh

Power Consumption|

Max . 450 mA

Charging Voltage|

Max . 5 V USB

Total Weight|

180 g

Standby / Music / Talk Time|

Max . 180 d / 38 h / 36 h

Care and Maintenance

Only clean this product with a slightly damp, lint-free cloth and do not use aggressive cleaning agents.

Warranty Disclaimer

Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes.

Service and Support

Please contact Hama Product Consulting if you have any questions about this product.
Hotline: +49 9091 502-0 (German/English)
Further support information can be found here: www.hama.com

Recycling Information

Note on environmental protection:
After the implementation of the European Directives 2012/19/EU and 2006/66/EU in the national legal system, the following applies:
electrical and electronic devices as well as batteries must not be disposed of with household waste. Consumers are obliged by law to return electrical and electronic devices as well as batteries to the designated public collection points or to the point of sale at the end of their service lives. Detailed information on this topic is defined in the national laws of the respective country. This presence of the above symbol on the product, operating instructions or package indicates that the product is subject to these regulations. By recycling, reusing the materials or other forms of utilising old devices/batteries, you are making an important contribution to protecting our environment.

Declaration of Conformity

Hama GmbH & Co KG hereby declares that the radio equipment type [00184100, 00184101, 00184102] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity can be found on the following website: www.hama.com -> 00184100, 00184101, 00184102 -> Downloads.