hama 00184078 Passion Clear Bluetooth Headphone Instruction Manual
- June 6, 2024
- Hama
Table of Contents
- Operating Instructions
- Safety instructions
- Switching on/off
- Charging
- Bluetooth® pairing
- Reset function
- Controls
- Hands-free function
- Technical data
- Care and maintenance
- Warranty disclaimer
- Service and Support
- Recycling information
- Declaration of Conformity
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
BLUETOOTH® EARPHONES
“Passion Clear”
00184078
00184079
Operating Instructions
Operating Instructions
Thank you for choosing a Hama product. Take your time and read the following instructions and information completely. Please keep these instructions in a safe place for future reference. If you sell the device, please pass these operating instructions on to the new owner.
Controls and displays
- Charging box
- Charging box status LED
- Earphones status LED
- Multi-function touch sensor
- Silicone ear pads
- Charging contacts
- Microphone
- USB-C connection
Explanation of warning symbols and notes
Warning
This symbol is used to indicate safety instructions or to draw your attention
to specific hazards and risks.
Note
This symbol is used to indicate additional information or important notes.
Package contents
1x “Passion Clear” True Wireless Bluetooth® Earphones
1x charging box
1x USB-C charging cable
3 pairs of ear pads in various sizes (S/M/L)
1x quick guide
1x warning and safety instructions
Safety instructions
- The product is intended for private, noncommercial use only.
- Use the product only for the intended purpose.
- Children should be supervised to ensure that they do not play with the product.
- Do not use the product in areas in which electronic products are not permitted.
- Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.
- Do not open the device or continue to operate it if it becomes damaged.
- Do not bend or crush the cable.
- Do not drop the product and do not expose it to any major shocks.
- Dispose of packaging material immediately in accordance with the locally applicable regulations.
- Do not modify the product in any way. Doing so voids the warranty.
- Protect the product from dirt, moisture, and overheating and use it in dry environments only.
- Do not use the product in the immediate vicinity of heaters, other heat sources or in direct sunlight.
- Only use the article under moderate climatic conditions.
- As with all electrical products, this device should be kept out of the reach of children.
- Do not operate the product outside the power limits specified in the technical data.
- Do not use the product in a damp environment and avoid splashing water
- While driving a car or using sports equipment, do not allow yourself to be distracted by your product and keep an eye on the traffic situation and your surroundings.
- The battery is permanently installed and cannot be removed; dispose of the product as a whole in accordance with the statutory regulations.
- Do not incinerate the battery or the product.
- Do not tamper with or damage/heat/disassemble the batteries/rechargeable batteries.
- Do not use the product during the charging process!
Warning – rechargeable battery
- Only use suitable charging devices or USB connections to charge the product.
- Do not use defective chargers or USB ports and do not attempt to repair them.
- Do not overcharge the product or allow the battery to completely discharge.
- Avoid storing, charging, and using in extreme temperatures and at extremely low atmospheric pressures (such as at high altitudes).
- Charge regularly (at least quarterly) during periods of prolonged storage.
Warning – magnets
-
This product generates magnetic fields. Persons with a cardiac pacemaker should consult a doctor before using this product,
as the pacemaker’s proper function could be affected. -
Do not store bank or similar cards with magnetic strips near the charging box or earphones. The data on the cards could be
damaged or completely deleted.
Warning – high volume
- High sound pressure!
- There is a risk of hearing damage.
- To prevent any loss of hearing, avoid listening to loud volumes for prolonged periods.
- Always keep the volume at a sensible level. Loud volumes, even over short periods, can cause hearing loss.
- Using this product limits your perception of ambient noise. You should therefore not drive or operate machinery while using them.
Switching on/off
ON: When you open the charging box, the earphones switch on automatically
and start the pairing process.
Alternative:
Press the multi-function touch sensor (4) on the left and right earphones for
approx. 2-3 seconds until you hear a signal sound.
OFF: To switch them off, simply place the earphones back in the charging
box. Ensure that the earphones are inserted into the correct sides, using the
L/R markings as a guide.
Alternative:
With the earphones
switched on, hold the multi-function touch sensor (4) on the left or right
earphone down for approx. 5 seconds until you hear a long signal sound.
Note – Automatic switch-off of the earphones
The earphones are equipped with an automatic switch-off mechanism. If there is
no connection to your device within 5 minutes, they switch off automatically.
Charging
Fully charge the earphones and the charging box once before using them for the first time.
-
Insert the earphones and connect the charging box
Place the earphones in the charging box. Ensure that the earphones are inserted into the correct sides, using the L/R markings as a guide . Connect the USB-C charging cable included to the charging socket (8) on the charging box . Connect the free plug on the USB-C charging cable to a suitable USB charger. To do this, consult the operating instructions for the USB charger you are using.
-
Charging procedure for the charging box and earphones
The status LEDs on the charging box (2) light up white during the charging process. After the charging box is fully charged, the 3 LEDs on the charging box light up solid white.
The status LEDs on the earphones (3) flash white during the charging process. Once the earphones are fully charged, the status LEDs (3) light up blue for around 30 seconds, and then the status LEDs go out.
It can take up to 2 .5 hours (earphones) or up to 3 hours (charging box) until the batteries are fully charged.
-
Battery capacity
Charging box
****| |
---|---|---
100% – 70%| 70% – 35%| 35% – 0%
When battery levels are low (< 20%), the first of the three status LED (2)
flashes white.
Earphones
When battery levels are low (< 20%), you will hear a signal tone once per
minute and the status LED (3) on the earphones flashes white.
The actual battery life varies depending on the use of the device, the
settings, and the environmental temperatures (batteries have a limited service
life).
Note
If you have not used the device for a few months, it can take up to 15 – 30
minutes until the status LED (2/3) lights up white during the charging
process.
Bluetooth® pairing
Note – Pairing
- Make sure that your Bluetooth® -capable device is switched on and that Bluetooth® is activated.
- For more information, please refer to the operating instructions of your device.
The earphones and the device should not be more than 1 meter apart. The
shorter the distance, the better.
Ensure that the earphones are switched on.
-
Check the status of the status LED (3)
If the status LED (3) on one of the earphones is flashing alternately:
the earphones are searching for a Bluetooth® connection.
If the status LEDs (3) are flashing:
the earphones are already paired with a Bluetooth® device.
-
Search using your device for the earphones (only required on the first connection)
Open the Bluetooth®settings on your device and wait until the list of found Bluetooth® devices shows Hama Passion Clear.
Select Hama Passion Clear and wait until the earphones are shown as connected in your device’s Bluetooth® settings. You will hear a brief signal sound.
Note – Bluetooth® password
Some devices require a password in order to connect to another Bluetooth® device.
• If your device requests a password to connect to the headphones, enter 0000.
Reset function
To reset the earphones to the factory settings, place the earphones in the
charging box. Press and hold the multi-function touch sensor (4) on the right
and left earphones simultaneously for around 8 seconds. You will hear a signal
tone twice in succession.
Controls
Note
- Please be aware that your terminal device must support some functions if they are to be used.
- For more information, please refer to the operating instructions of your device.
Voice assistant function
Tap the multi-function touch sensor (4) on the left or right earphone three times to initiate communication with Siri or the Google Assistant. You will hear a brief signal sound.
Note – Siri
Siri is only available on suitable devices running iOS 5 (iPhone 4s or later)
or higher.
Note – Google Assistant
- The Google Assistant is only available on suitable devices running Android 5.0 or higher with Google Play Services, >1 .5 GB of free memory, and a minimum screen resolution of 720P.
- The Google Assistant App must be available on your device and be set as the default voice assistant.
ANC function
The earphones are equipped with an Active Noise Cancelling function (ANC) to
reduce unwanted ambient noise. If ANC is activated, noise can be reduced by up
to -22 dB.
Press and hold the multi-function touch sensor (4) on the left or right
earphone for around 2 seconds to switch ANC on or off. You will hear a brief
signal sound in each case.
Hands-free function
It is possible to use the earphones like a hands-free facility for your device.
-
Make a call
Dial the number directly via your device to make a call. -
Accept a call
Tap the multi-function touch sensor (4) on the left or right earphone once to accept an incoming call. -
Reject a call
To reject an incoming call, tap and hold the multifunction touch sensor (4) on the left or right earphone for around 1 second. You will hear a brief signal sound. -
End a call
During the call, tap the multi-function touch sensor (4) on the left or right earphone twice to end the call. You will hear a brief signal sound. -
Last number redial
You can redial the last number you called via the voice assistant function (7 .1).
Audio playback
-
Start playback on your device.
-
Play / Pause
Tap the multi-function touch sensor (4) on the left or right earphone once to start or stop audio playback. -
Next track
Tap the multi-function touch sensor (4) on the right earphone twice to skip to the next track. -
Previous track
Tap the multi-function touch sensor (4) on the left earphone twice to skip to the previous track.
Volume control
The volume is controlled by the voice assistant function (7 .1).
Alternatively, you can also control the volume via your device.
Technical data
Bluetooth earphones
Bluetooth technology| Bluetooth® v5 .0
Profiles supported| A2DP V1 .3, AVRCP V1 .6, HFP V1 .7, HSP
Frequency for Bluetooth® transmissions| 2402 – 2480 MHz
Range| < 10 m
Rechargeable battery
Battery type| 3 .7 V Li-polymer
Min. capacity Earphones/charging box| 43 mAh / 390 mAh
Charging box current consumption| max . 5 V 280 mA
Earphones charging time| ~ 2 .5 h
Charging box charging time| ~ 3 h
Standby | ~ 90 d
ANC| -22 dB
Music time (charging box) /ANC on| ~ 4 h (~ 15 h) /
~ 3 h (~ 11 h)
Talk time (charging box)| ~ 3 .5 h (~ 14 h)
ANC on (charging box)| ~ 8 h (~ 32 h)
Weight of earphones| approx . 5 g per earphone
Weight of charging tray incl. earphones| approx . 50 g
- Once fully charged
Care and maintenance
Only clean this product with a slightly damp, lint-free cloth and do not use aggressive cleaning agents.
Warranty disclaimer
Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product, or failure to observe the operating instructions and/or safety notes.
Service and Support
Please contact Hama Product Consulting if you have any questions about this
product.
Hotline: +49 9091 502-0 (German/English)
Further support information can be found here:
www.hama.com
Recycling information
Note on environmental protection:
Following the implementation of European Directive 2012/19/EU and 2006/66/EU
into the national legal systems, the following applies:
Electrical and electronic devices, as well as batteries, must not be disposed
of with household waste. Consumers are obliged by law to return electrical and
electronic devices as well as batteries to the designated public collection
points or to the point of sale at the end of their service lives. Detailed
information on this topic is defined in the national laws of the respective
country. The presence of the above symbol on the product, operating
instructions, or package indicates that the product is subject to these
regulations. By recycling, reusing the materials, or other forms of utilizing
old devices/ batteries, you are making an important contribution to protecting
our environment .
Declaration of Conformity
Hama GmbH & Co KG hereby declares that the radio equipment type [00184078, 00184079] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following Internet address: www.hama.com -> 00184078, 00184079 -> Downloads.
Frequency band(s) | 2402 MHz – 2480 MHz |
---|---|
Maximum radio-frequency power transmitted | 2 .5 mW |
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>