hama 00118092 Easel Design TV Stand Instruction Manual

June 6, 2024
Hama

Company Logo TV Stand
TV-Bodenständer
00
118092
118093
118099

Operating Instructions

Required tools

hama 00118092 Easel Design TV Stand - TOOLS

Installation kit

hama 00118092 Easel Design TV Stand - KIT

hama 00118092 Easel Design TV Stand - FIG

hama 00118092 Easel Design TV Stand - FIG1

hama 00118092 Easel Design TV Stand - FIG2

hama 00118092 Easel Design TV Stand - FIG4

hama 00118092 Easel Design TV Stand - FIG7

hama 00118092 Easel Design TV Stand - FIG8

Operating instruction
Thank you for choosing the Hama product.
Take your time and read the following instructions and information completely.Please keep these instructions in a safe place for future reference. If you sell the device, please pass these operating instructions on to the new owner.

Explanation of Warning Symbols and Notes

Warning
This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.
Note
This symbol is used to indicate additional information or important notes.

Package Contents

  • TV Stand (1x)
  • Installation kit (see contents, Fig. 1)
  • These operating instructions

Note
Please check that the installation kit is complete before installing the TV Stand and ensure that none of the parts are faulty or damaged.

Safety Notes

Warning

  • Please contact a qualified specialist before mounting the TV stand.
  • Maintain the necessary safety clearance around the attached load (depending on the model).
  • After the TV stand has been mounted, check that it is sufficiently secure and safe to use.
  • You should repeat this check at regular intervals (at least every three months).
  • In case of damage, remove the devices and do not continue to use the TV stand.
  • Ensure that the electrical cables arenot crushed or damaged during installation.
  • Do not place loads on the TV stand that is heavier than the specified load-bearing capacity, and do not exceed the specified maximum screen size.
  • Ensure that the load on the TV stand is symmetrically balanced.
  • Place the product only on flat, non-slip surfaces that can bear the weight of the product and the device attached to it.
  • Check the general operational safety regularly and make surethat the product and the device attached to it are positioned securely.
  • You should repeat this check at regular intervals (at least every three months).
  • In the event of damage to the product, remove the attached load and stop using the product.
  • Keep the packaging material out of the reach of children due to the risk of suffocation.
  • Dispose of packaging material immediately according to locally applicable regulations.
  • Do not modify the product in any way. Doing so voids the warranty.
  • Do not allow children to use the product for climbing.
  • Do not attach any other objects to the product.

Intended use and specifications

  • The product is used for mounting flat panel displays for non-commercial, private household use.
  • The product is intended for indoor use only.
  • Use the TV stand for the intended purpose only.
Screen size: 94.0 -191.0 cm (US: 37″ -75″)
Mounting holes: nach VESA-Standard600x400
Loading capacity: 40 kg
Width: 79 cm
Height: 133 cm
Depth: 54 cm

Installation requirements and installation

Note

  • Only mount the TV stand with the help of a second person! Get the support and help you need.
  • Ensure that no electrical cables are crushed or damaged during installation or adjusting.
  • Once you have mounted the product and the attached load, check that they are sufficiently secure and safe to use.
  • Observe the other warnings and safety instructions.
  • Proceed step-for-step in accordance with the illustrated installation instructions (Fig. 1ff.).
  • Use the fold-out VESA arms and mount your TV at the desired height (see Fig. 2).
  • Depending on the size of the TV you are mounting, the VESA arms may protrude past the TV. After removing the side screws, the VESA arms can be folded up or down as required (see Fig. 4).

Note

  • Given the multitude of terminal devices available on the market, we cannot describe all possible mounting options here.
  • Please ensure that the bracket lays flat and evenly on the back of the television.
  • Use the enclosed spacer to even out any unevenness on the back of the television.
  • Ensure that all screws have the proper length and can be mounted until they are hand-tight (see Fig. 2).

Setting and maintenance

Warning
The bracket is not adjustable.

  • Check that the bracket is secure and safe to use at regular intervals (at least every three months). Only use water or standard household cleaners for cleaning.
  • Make surethat the screws are tightened and that the safety device is locked (see Fig. 3).

Warranty Disclaimer

Hama GmbH &CoKGassumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product, or from failure to observe the operating instructions and/or safety notes.
Terms of warranty
Hama GmbH &CoKGgrants you an extended manufacturer’s warranty for this product that covers the freedom from defects, usability, workmanship, and durability of the materials used for the specified period of 10 years. Compatibility of the product with future standards for further developed hardware is also excluded.
At the discretion of Hama GmbH &CoKG, valid warranty claims in this period will be resolved at no cost either by repair or replacement. The warranty period begins on the date of purchase of this product and is valid throughout the EU.
The warranty you are entitled to be in addition to your statutory rights and does not affect them. The warranty does not cover damage caused by improper use, normal wear, and tear, exposure to chemicals, force majeure, or modifications or repairs performed by yourself or third parties.
Furthermore, this warranty does not cover accessories that arenot included with the product as standard(promotional parts).
In the event of a warranty claim please write to us, enclosing proof of purchase, at Hama GmbH &CoKG, Dresdner Str. 9, 86653 Monheim, Germany. You are also free to contact us at www.hama.de or by telephone at +49 (0)9091/502-0.

Company Logo Hama GmbH &CoKG
86652 Monheim /Germany
Service &Support
www.hama.com
+49 9091 502-0
D BG
All listed brands are trademarks of the corresponding companies.
Errors and omissions excepted, and subject to technical changes.
Our general terms of delivery and payment are applied.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals