hama 00118052 Fullmotion TV Wall Bracket Instruction Manual

June 6, 2024
Hama

hama 00118052 Fullmotion TV Wall Bracket

Required tools


Installation kit




  • Spreading open of the dowel in case of different wall types








Operating instruction

Thank you for choosing a Hama product.
Take your time and read the following instructions and information completely. Please keep these instructions in a safe place for future reference. If you sell the device, please pass these operating instructions on to the new owner.

Explanation of Warning Symbols and Notes

| Warning This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.
---|---
| Note
This symbol is used to indicate additional information or important notes.
---|---

Package Contents
  • TV wall bracket
  • Drilling template
  • Installation kit (see contents, Fig. 1)
  • These operating instructions

| Note
Please check that the installation kit is complete before installing the bracket and ensure that none of the parts are faulty or damaged.
---|---

Safety Notes

| Warning

  • The supplied anchors are suitable for concrete, solid brick and cavity brick walls, as well as most walls made of panels.
  • Given the multitude of terminal devices and wall structures available on the market, the supplied mounting kit is unable to cover every option.
  • It occasionally happens that the screws for attaching the terminal device to the wall bracket are too long.
  • Read the operating instructions for your terminal device before attempting to mount it. The instructions provide information about the type and measurements of suitable fastening materials.
  • If the supplied mounting kit does not contain suitable fastening materials for mounting the terminal device, purchase these from a specialised dealer.
  • If the wall on which the bracket is to be mounted is made of different material types and construction types to those specified, purchase suitable mounting materials from a specialised dealer.
  • Never apply force during mounting. This can damage your end device or wall bracket.
  • If in doubt, have this product mounted by a qualified technician – do not attempt to mount it yourself!

---|---

  • Do not mount the product above locations where persons might linger.
  • Once you have mounted the product and the attached load, check that they are sufficiently secure and safe to use.
  • You should repeat this check at regular intervals (at least every three months).
  • When doing so, ensure that the product does not exceed its maximum permitted carrying capacity and that no load exceeding the maximum permitted dimensions is attached.
  • Make sure that the product is loaded symmetrically.
  • Maintain the necessary safety clearance around the attached load (depending on the model).
  • In the event of damage to the product, remove the attached load and stop using the product
Intended use and specifications
  • The bracket is used for wall mounting flat panel displays for non-commercial, private household use.
  • The bracket is only intended for use within buildings.
  • Use the bracket only for the intended purpose.
Maximum load bearing capacity: 25 kg
Screen size: 48.0 – 122.0 cm (US: 19″ – 48″)
Depth: 8.3 – 23.5 cm
Rotation: 360°
Angle: -/+15° (depends on the device)
Pivoting range: up to 180° on 2 joints (depends on the device)
Wall mounting plate dimensions: 18.0 x 6.0 cm
Mounting holes: according to the VESA standard 200×200
Installation requirements and installation

| Note

  • Only mount the TV wall bracket with the help of a second person. Get the support and help you need.
  • Different end devices have different options for connecting cables and other devices. Before installation, ensure that the necessary connections will still be accessible after installation.
  • The same mounting kit is included with all of our TV wall brackets. Depending on the product and mounting type, you may not need to use the entire mounting kit. Unneeded screws and other small parts may be left over, even if the wall bracket is properly mounted. Keep these leftover parts with the operating instructions in a safe place, just in case you might need them later on (e.g. should you move, sell the product, mount the wall bracket in a different location, buy a new TV, etc).

---|---
| Warning

  • This product is suitable for wall mounting only.
  • Before installing the bracket, ensure that the wall on which the television is to be mounted is suitable for the weight and make sure that no electrical wires, water, gas or other lines are located at the installation location.
  • The supplied anchors are suitable for concrete, solid brick and cavity brick walls, as well as most walls made of panels.

---|---

  • Observe the other warnings and safety instructions.
  • Proceed step-for-step in accordance with the illustrated installation instructions (Fig. 1 ff.).
  • During installation, the hinges are to be adjusted so that the TV can be moved sideto-side.

  • Given the multitude of terminal devices available on the market, we cannot describe all possible mounting options here.
  • Please ensure that the bracket lays flat and evenly on the back of the television.
  • Use the enclosed spacer to even out any unevenness on the back of the television.
  • Ensure that all screws have the proper length and can be mounted until they are hand-tight (see Fig. 4).

Setting and maintenance

| Note Only adjust the TV wall bracket with the help of a second person. Get the support and help you need.
---|---

  • It can be turned by 360° and moved laterally without having to undo any screws.

  • Pull the safety cord downwards for securing, hang the TV panel in the wall plate and let snap into place by releasing. (fig. 5).

  • Loosen the locking feature only if the engagement mechanism is at the bottom part of the TV plate. If the locking feature is loosened in a rotated position, the TV set will fall.
    Risk of injury! (Fig. 6.)

  • Check that the bracket is secure and safe to use at regular intervals (at least every three months). Only use water or standard household cleaners for cleaning.

Warranty Disclaimer

Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes.

Service & Support

www.hama.com
+49 9091 502-0

All listed brands are trademarks of the corresponding companies. Errors and omissions excepted, and subject to technical changes. Our general terms of delivery and payment are applied.

Documents / Resources

| hama 00118052 Fullmotion TV Wall Bracket [pdf] Instruction Manual
00118052, Fullmotion TV Wall Bracket, 00118052 Fullmotion TV Wall Bracket, TV Wall Bracket, Wall Bracket
---|---

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Hama User Manuals

Related Manuals