hama 00200103 USB-C Docking Station Instruction Manual

hama 00200103 USB-C Docking Station Instruction Manual

Hama GmbH & Co KG 86652 Monheim/Germany

perating instruction

!. Package Contents

• USB-C Docking Station
• USB-C cable
• 2 bases
• These operating instructions

2. Safety Notes

• Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.
• Do not open the device or continue to operate it if it becomes damaged.
• Do not operate the product outside the power limits given in the specifications.
• Do not modify the product in any way. Doing so voids the warranty.
• Keep this product, as all electrical products, out of the reach of children!Use the product for its intended purpose only.
• Protect the product from dirt, moisture and overheating, and only use it in a dry environment.
• The product is intended for indoor use only.
• Do not use the product in the immediate vicinity of heaters or other heat sources or in direct sunlight.
• Do not use the product in moist environments and avoid splashes.
• Do not use the product in areas where the use of electronic devices is not permitted.
• Do not drop the product and do not expose it to any major shocks.
• Dispose of packaging material immediately according to locally applicable regulations.

Warning

• Find out the maximum output current capacity of the USB port on your device. To do this, consult the operating instructions or ask the manufacturer.
• Common values are 500 mA for USB-A 2.0, 900 mA for USB-A 3.0, and up to 3000 mA for USB-C.
• Ensure that the cumulative current draw of all USB devices connected to the hub/multiport adaptor does not exceed this value..

Note

• To be able to use the charging function, the device must support Power Delivery (PD) or Thunderbolt-3/4.
• To be able to use the HDMI™ function, the device must support DisplayPort Alternate Mode or Thunderbolt-3/4.
• For optimised video function, we recommend passive monitor adapters / cables (without chipset / signal converter).

3. Startup and Operation

• Switch on your computer and boot the system.
• Connect the product to a free USB port on your computer.
• You do not have to install drivers; the computer will automatically recognise the product.
• If necessary, follow the instructions for your operating system.
• In order to use your devices, plug them into the product one after the other.

4. Warranty Disclaimer

Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/ or safety notes.

5. Technical Data

Operating voltage / current consumption| 5– 20V  max. 3A
Compatibility| USB-C port
System requirements| Windows 11 / 10/8/7 Mac OS 10.8 ≥
USB specification| USB 3.2 Gen1

Note

• If there is interference or the product no longer responds, unplug the product, wait a few seconds and then plug it in again.

Read More About This Manual & Download PDF:

References

• hama.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>