hama 00108716 TV Wall Bracket Instruction Manual
- June 6, 2024
- Hama
Table of Contents
hama 00108716 TV Wall Bracket
Operating instruction
Thank you for choosing a Hama product. Take your time and read the following instructions and information completely. Please keep these instructions in a safe place for future reference. If you sell the device, please pass these operating instructions on to the new owner.
Explanation of Warning Symbols and Notes
Warning: This symbol is used to indicate safety instructions or to draw
your attention to specific hazards and risks.
Note: This symbol is used to indicate additional information or important
notes.
Package Contents
- TV wall bracket
- TV support arms (2x)
- Installation kit (see contents, Fig. 1)
- These operating instructions
Note: Please check that the installation kit is complete before installing the bracket and ensure that none of the parts are faulty or damaged.
Safety Notes
Warning
- Given the multitude of terminal devices and wall structures available on the market, the supplied mounting kit is unable to cover every option.
- It occasionally happens that the screws for attaching the terminal device to the wall bracket are too long.
- Please note that the supplied wall plugs are for use with concrete brick and solid brick walls only.
- Read the operating instructions for your terminal device before attempting to mount it. The instructions provide information about the type and measurements of suitable fastening materials.
- If the supplied mounting kit does not contain suitable fastening materials for mounting the terminal device, purchase these from a specialised dealer.
- If the wall on which the bracket is to be mounted is made of different material types and construction types to those specified, purchase suitable mounting materials from a specialised dealer.
- Never apply force during mounting. This can damage your end device or wall bracket.
- If in doubt, have this product mounted by a qualified technician – do not attempt to mount it yourself!
- Do not mount the product above locations where persons might linger.
- Once you have mounted the product and the attached load, check that they are sufficiently secure and safe to use.
- You should repeat this check at regular intervals (at least every three months).
- When doing so, ensure that the product does not exceed its maximum permitted carrying capacity and that no load exceeding the maximum permitted dimensions is attached.
- Make sure that the product is loaded symmetrically.
- During adjustment, ensure that the product is loaded symmetrically and that the maximum permitted carrying capacity is not exceeded.
- Maintain the necessary safety clearance around the attached load (depending on the model).
- In the event of damage to the product, remove the attached load and stop using the product.
Intended use and specifications
• The bracket is used for wall mounting flat panel displays for non-
commercial, private household use.
• The bracket is only intended for use within buildings.
• Use the bracket only for the intended purpose.
- Maximum load bearing capacity: 00108716: 30 kg 00108717: 35 kg
- Screen size: 00108716: 81.0 – 165.0 cm (US: 32″ – 65″) 00108717: 81.0 – 191.0 cm (US: 32″ – 75″)
- Depth: 5.2 cm
- Angle -15°/+5° (depends on the device)
- Wall mounting plate dimensions: 00108716: 44.5 x 10.5 cm 00108717: 64.5 x 10.5 cm
- Mounting holes: according to the VESA standard until: 00108716: 400×400 00108717: 600×400
Installation requirements and installation
Note
• Only mount the TV wall bracket with the help of a second person. Get the
support and help you need.
• Different end devices have different options for connecting cables and other
devices. Before installation, ensure that the necessary connections will still
be accessible after installation.
• The same mounting kit is included with all of our TV wall brackets.
Depending on the product and mounting type, you may not need to use the entire
mounting kit. Unneeded screws and other small parts may be left over, even if
the wall bracket is properly mounted. Keep these leftover parts with the
operating instructions in a safe place, just in case you might need them later
on (e.g. should you move, sell the product, mount the wall bracket in a
different location, buy a new TV, etc).
Warning
- This product is suitable for wall mounting only.
- Before installing the bracket, ensure that the wall on which the television is to be mounted is suitable for the weight and make sure that no electrical wires, water, gas or other lines are located at the installation location.
- Please note that the provided wall anchors are only approved for concrete and solid brick walls.
- Observe the other warnings and safety instructions.
- Proceed step-for-step in accordance with the illustrated installation instructions (Fig. 1 ff.).
Note
• Given the multitude of terminal devices available on the market, we cannot
describe all possible mounting options here.
• Please ensure that the bracket lays flat and evenly on the back of the
television.
• Use the enclosed spacer to even out any unevenness on the back of the
television.
• Ensure that all screws have the proper length and can be mounted until they
are hand-tight (see Fig. 3).
Setting and maintenance
Note Only adjust the TV wall bracket with the help of a second person. Get the support and help you need.
• To adjust the inclination, loosen the side mounting screws slightly, set the
desired angle and retighten the screws securely.
• Check that the bracket is secure and safe to use at regular intervals (at
least every three months). Only use water or standard household cleaners for
cleaning.
• To secure, insert the carrying arms into the wall plate and tighten both
screws.
Warranty Disclaimer
Hama GmbH & Co KG assumes no liability and provides no warranty for damage
resulting from improper installation/mounting, improper use of the product or
from failure to observe the operating instructions and/or safety notes.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>