hama 00135804 Smartphone Holder Universal Instruction Manual
- June 6, 2024
- Hama
Table of Contents
00
135804
Smartphone Holder „Universal”
Smartphone-Halter
**Operating Instructions
**
Operating instruction
Thank you for choosing the Hama product. Take your time and read the following
instructions and information completely. Please keep these instructions in
asafe place for future reference. If you sell the device, please pass these
operating instructions on to the new owner.
This product has been developed specifically to provide your mobile device
with energy while you are on the go without requiring a power supply or a
power supply unit.
1. Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.
Note
This symbol is used to indicate additional information or important notes.
Package Contents
- 1universal multi-bracket
- 1adhesive pad
- 1ventilation grill clamp
- These operating instructions
Safety Notes
- Use the product for its intended purpose only.
- Protect the product from dirt, moisture, and overheating, and only use it in an adry environment.
- When using this product, observe the applicable local traffic laws and regulations.
- Do not drop the product and do not expose it to any major shocks.
- Dispose of packaging material immediately according to locally applicable regulations.
- Do not modify the product in any way. Doing so voids the warranty.
Installation
Note
- Before mounting the holder, check the installation options in your vehicle. If in doubt, consult the manual for your vehicle or contact the manufacturer.
- Never apply force when using the product or during installation.
Warning
- Take care that components such as airbags, safety areas, controls, instruments, etc., and visibility are not blocked or restricted.
Universal holder
- Attach the universal holder using the catch on the holder (ventilation grill clamp, adhesive pad).
- Press the button on the side of the universal holder to open the holding brackets. (B 1)
- Insert the terminal device of your choice and secureitinplace by lightly pushing the holding brackets together.(B2)
- In order to easily remove the terminal device, press the button on the side of the universal holder. (B1)
Note
- Always take your terminal device out of the holder before attaching or removing the holder (Adhesive pad, ventilation grill clamp).
Adhesive pad
When using the adhesive bracket, the adhesive surface in the vehicle must be
free of dust and grease. Clean the surface using a suitable cleaning agent
(specialized dealer). Leave the adhesive pad in a stationary position, without
a load, for at least 24 hours! Mount the device rack only when having done so.
Ventilation grill bracket
Slide the ventilation grill bracket onto the open panel until it locks into
position. (A)
Care and Maintenance
Only clean this product with a slightly damp, lint-free cloth and do not use
aggressive cleaning agents.
Warranty Disclaimer
Hama GmbH &Co. KG assumes no liability and provides no warranty for damage
resulting from improper installation/mounting, improper use of the product or
from failure to observe the operating instructions and/or safety notes.
S ervice and Support
Please contact Hama Product Consulting if you have any questions about this
product.
Hotline: +49 9091 502-115 (German/English)
Further support information can be found here:
www.hama.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>