hama 00118685 Projector Mount Instruction Manual
- June 6, 2024
- Hama
Table of Contents
- Operating Instructions
- Required tools
- Installation kit
- Operating instruction
- Explanation of Warning Symbols and Notes
- Package Contents
- Safety Notes
- Intended use and specifications
- Installation requirements and installation
- Setting and maintenance
- Warranty Disclaimer
- Terms of warranty
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
00 118685
Projector mount
Operating Instructions
Operating Instructions
Required tools
Installation kit
Operating instruction
Thank you for choosing a Hama product.
Take your time and read the following instructions and information completely.
Please keep these instructions in a safe place for future reference. If you
sell the device, please pass these operating instructions on to the new owner.
Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety instructions or to draw your
attention to specific hazards and risks.
Note
This symbol is used to indicate additional information or important notes.
Package Contents
- Projector bracket
- Installation kit (see contents, Fig. 1)
- These operating instructions
Note
Please check that the installation kit is complete before installing the
bracket and ensure that none of the parts are faulty or damaged.
Safety Notes
Warning
- Given the multitude of terminal devices and wall structures available on the market, the supplied mounting kit is unable to cover every option.
- In some cases, the screws for attaching the terminal device to the product on the wall bracket are too long.
- Please note that the supplied wall plugs are for use with concrete brick and solid brick walls only.
- Read the operating instructions for your terminal device before attempting to mount it. The instructions provide information about the type and measurements of suitable fastening materials.
- If the supplied mounting kit does not contain suitable fastening materials for mounting the terminal device, purchase these from a specialised dealer.
- If the installation surface on which the bracket is to be mounted is made of different materials or construction types to those specified, purchase suitable mounting materials from a specialized dealer.
- Never apply force during installation. This may damage your terminal device or the product.
- If in doubt, have this product mounted by a qualified technician -do not attempt to mount it yourself!
- Do not mount the product above locations where persons might linger.
- Once you have mounted the product and the attached load, check that they are sufficiently secure and safe to use.
- You should repeat this check at regular intervals (at least every three months).
- When doing so, ensure that the product does not exceed its maximum permitted carrying capacity and that no-load exceeding the maximum permitted dimensions is attached.
- Make sure that the product is loaded symmetrically.
- During adjustment, ensure that the product is loaded symmetrically and that the maximum permitted carrying capacity is not exceeded.
- Maintain the necessary safety clearance around the attached load (depending on the model).
- In the event of damage to the product, remove the attached load and stop using the product.
Intended use and specifications
- The bracket is used for wall mounting projectors for non-commercial, private household use.
- The bracket is only intended for use within buildings.
- Use the bracket only for the intended purpose.
Maximum load-bearing capacity: | 13.5 kg |
---|---|
Distance of threaded holes: | up to 320 mm |
Range of rotation: | up to 360° |
Angle: | up to –/+ 15° |
Distance to the ceiling: | 15 cm |
Installation requirements and installation
Note
- Only mount the bracket with the help of a second person. Get the support and help you need.
- Different end devices have different options for connecting cables and other devices. Before installation, ensure that the necessary connections will still be accessible after installation.
- The same mounting kit is included with all of our TV brackets. Depending on the product and mounting type, you may not need to use the entire mounting kit. Unneeded screws and other small parts may be leftover, even if the bracket is properly mounted. Keep the leftover parts and the operating instructions in a safe place, in case you might need them later on (e.g. should you move, sell the product, mount the bracket in a different location, buy a device, etc.).
Warning
-
Before installing the bracket, ensure that the wall on which the television is to be mounted is suitable for the weight and make sure that no electrical wires, water, gas or other lines are located at the installation location.
-
Please note that the provided wall anchors are only approved for concrete and solid brick walls.
-
Observe the other warnings and safety instructions.
-
Proceed step-for-step in accordance with the illustrated installation instructions (Fig. 1ff.).
-
During installation, secure the mounting screw in such a way as to ensure that the Bracket can still be rotated.
Setting and maintenance
Note
Only adjust the Bracket with the help of a second person. Get the support and
help you need.
- Screws do not have to be loosened for rotating movement.
- To adjust the tilt, loosen the Philips-head screws on the carrying arm (see fig. 8) slightly, set the desired tilt, and retighten the screws securely.
- Check that the bracket is secure and safe to use at regular intervals (at least every three months). Only use water or standard household cleaners for cleaning.
Warranty Disclaimer
Hama GmbH &CoKG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes.
Terms of warranty
HAMA GmbH &CoKGgrants you an extended manufacturer’s warranty for this product that covers the freedom from defects, usability, workmanship, and durability of the materials used for the specified period of 10 years. Compatibility of the product with future standards for further developed hardware is also excluded. At the discretion of Hama GmbH &CoKG, valid warranty claims in this period will be resolved at no cost either by repair or replacement. The warranty period begins on the date of purchase of this product and is valid throughout the EU. The warranty you are entitled to is in addition to your statutory rights and does not affect them. The warranty does not cover damage caused by improper use, normal wear, and tear, exposure to chemicals, force majeure, or modifications or repairs performed by yourself or third parties. Furthermore, this warranty does not cover accessories that are not included with the product as standard(promotional parts). In the event of a warranty claim please write to us, enclosing proof of purchase, at Hama GmbH &CoKG, Dresdner Str. 9, 86653 Monheim, Germany. You are also free to contact us at www.hama.de or by telephone at +49 (0)9091/502-0.
Hama GmbH &CoKG
86652 Monheim /Germany
Service &Support
www.hama.com
+49 9091 502-0
All listed brands are trademarks of the corresponding companies. Errors and omissions excepted and subject to technical changes. Our general terms of de livery and payment are applied.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>