TCP Fluorescent Emergency Ballast 1400 Lumens User Guide
- June 6, 2024
- TCP
Table of Contents
TCP Fluorescent Emergency Ballast 1400 Lumens User Guide
Illumination
- Works with or without an AC ballast to convert new or existing fluorescent fixtures into unobtrusive emergency lighting.
- Operates one or two lamps in the emergency mode for a minimum of 90 minutes.
- Provides a maximum initial lumen output of 1400 lumens.
Electrical
- Dual 120/277 voltage.
- Charge rate/power “ON” LED indicator light and push-to-test switch for mandated code compliance testing.
- 6V long life, maintenance-free, rechargeable sealed NiCd battery.
- Internal solid-state transfer switch automatically connects the internal battery to fluorescent lamp(s) for minimum 90-minute emergency illumination.
- Full automatic solid-state, two rate charger initiates battery charging to recharge a discharged battery in 24 hours.
- Time delay enhancement to overcome end-of-life circuit problems.
Mounting
- Suitable for installation inside, on top, or in remote* of the fixture.
- Can be used in both switched and unswitched fixtures.
- UL Listed for factory or field installation.
Housing
- Durable painted steel construction in white finish.
- Compact design fits most fluorescent fixtures.
Options
- CEC Certified to CEC under Title 20 regulations.
Warranty/Listing
- Five year warranty against defects in material and workmanship (lamps excluded).
- Meets UL924, NFPA 101 Life Safety Code, NEC, OSHA, Local and State codes.
- UL Listed for damp locations (0ºC –50ºC).
- Suitable for use in sealed and gasketed fixtures.
Lamp Compatibility
- Compatible with most one-, two-, three-, and four-lamp electronic standard and dimming AC ballasts.
- Operates one or two T5, T5HO, T8, T12, T8HO, T12HO, Circular T5/T9, U-bend T8/T12, 4-Pin CFL and long CFL lamps in emergency mode. Refer to the chart below for a list of compatible lamps.
Dimensions
Lamp Compatibility Chart
*When battery packs are remote mounted, the remote distance cannot exceed 1/2 the distance from ballast to lamp specified by the A.C. ballast manufacturer. The maximum allowable remote mounting distance is 50 feet.
NOTE: In 2-lamp operation, lumens are equally split between the two lamps.
NOTE: Refer to the spec sheet for complete chart.
| LAMP TYPE | WATTS | INITIAL LUMENS |
|---|---|---|
| 1-Lamp | 2-Lamp | |
| 15 | 14 | 900 |
| 15 | 21 | 1050 |
| 15 | 28 | 1150 |
| 15 | 35 | 1200 |
| T5H0 | 24 | 1100 |
| T5H0 | 54 | 1350 |
| T5H0 | 39 | 1200 |
| T8 | 17 | 1000 |
| T8 | 25 | 1100 |
| T8 | 28 | 1150 |
| T8 | 32 | 1300 |
| T8 | 40 | 1350 |
| T8H0 | 44 | 1350 |
| LAMP TYPE | WATTS | INITIAL LUMENS |
| --- | --- | --- |
| 1-Lamp | 2-Lamp | |
| T8 | 51 | 1400 |
| T8 | 59 | 1400 |
| T8H0 | 86 | 1400 |
| T12 | 20 | 700 |
| T12 | 25 | 750 |
| T12 | 30 | 800 |
| T12 | 34 | 850 |
| T12 | 40 | 950 |
| T12 | 75 | 1300 |
| T12H0 | 95 | 1400 |
| T12H0 | 110 | 1400 |
| T12H0 | 150 | 1400 |
| T12H0 | 215 | 1400 |
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>