niko 170-34505 Home Control Slim Stopcontact Zigbee User Manual

niko 170-34505 Home Control Slim Stopcontact Zigbee

Dimensions

Wiring

This product must be secured with a miniature circuit breaker (MCB) of max. 16 A (wiring 2.5 mm²) or 20 A (wiring 2.5mm²) in the electrical cabinet. The MCB rating is limited by national installation rules.

Zigbee® network

Network setup
Follow the Zigbee® network setup advice (see image on the right) to guarantee the meshing of the devices before you install the switch on the wall.
More information on Zigbee® network principles: guide.niko.eu

Also respect a minimum distance of 2 m between a Zigbee® device (including the smart hub) and another RF transmitter (for example a Wi-Fi device) or devices such as motors, pumps, electronic LED transformers, solar panel inverters, home battery storage …

Installation

Dismantling

Stand-alone use

In an installation without a wireless smart hub (552-00001) or wireless bridge (550-00640), you can use the connected socket outlet to switch the plugged in device on and off.

Connected use

In the connected use mode, the connected socket outlet can b

More advanced options become available if you connect this device to your wireless smart hub (552-00001) or wireless bridge (550-00640) using the Niko Home Control programming software or Niko Home app (see ‘Image 1’).
Consult guide.niko.eu for more information about the installation and the connected use
Download the Niko Home Control programming software

Image 1

www.niko.eu/article/550-99102 (Windows)
www.niko.eu/article/550-99202 (Mac)

OR

Connected to a third-party Zigbee® network
Niko connected Zigbee® devices behave like standard Zigbee® devices in third- party networks that allow this operation. Consult the manufacturer’s manual for more information on the possibility to use third-party Zigbee® devices in their network.
Niko Zigbee® devices connected to another controller/gateway will not mesh in the Niko Home Control Zigbee® network and specific Niko Home Control functions will not be available.The Niko device will only control its own contact and share standard measurement values with the third-party Zigbee® network.
See disclaimer on www.niko.eu/zigbee.

How to connect the Niko device to a third-party Zigbee® network

1.  If the Niko Zigbee® device was already connected to another network, you will need to reset it before you can connect it to another network. See § Reset
2. Follow the third-party onboarding procedure to add new Zigbee® devices to the third-party Zigbee® network
3. Set the Niko device in pairing mode (see ‘Image 2’)

Control

Consult guide.niko.eu for more information about the installation and connected use.

Online guide

Consult guide.niko.eu for more information about the installation, the onboarding, the manual use, the connected use and troubleshooting.

guide.niko.eu

LED behaviour

Warnings regarding installation

The installation of products that will permanently be part of the electrical installation and which include dangerous voltages, should be carried out by a qualified installer and in accordance with the applicable regulations. This user manual must be presented to the user. It should be included in the electrical installation file and it should be passed on to any new owners. Additional copies are available on the Niko website or via Niko customer services.

Support & contact

+32 3 778 90 80
support@niko.eu

Niko prepares its manuals with the greatest care and strives to make them as complete, correct and up-to-date as possible. Nevertheless, some deficiencies may subsist. Niko cannot be held responsible for this, other than within the legal limits. Please inform us of any deficiencies in the manuals by contacting Niko customer services at support@niko.eu.

References

• Confluence Mobile - Niko Guide
• Niko - home automation, switches, socket outlets and detector
• Niko - home automation, switches, socket outlets and detector
• Niko Home Control II programming software for Windows
• Niko Home Control II programming software for Mac
• Zigbee

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>