GoXTREME 2203466 Manta 4K Action Camera User Manual
- June 6, 2024
- GoXTREME
Table of Contents
IMPORTANT INFORMATION
To ensure the optimal operation of your camera, please note the following important information:
MicroSD card
-
Please ensure your memory card is formatted in the camera before using the card for the first time (Settings > Format). Before formatting, make sure that all the files in your memory card have been backed up as formatted, and erased files can not be restored.
-
The maximum capacity memory card supported is 64GB.
The use of memory cards exceeding the maximum recommended capacity may result in file errors. -
For best results, we recommend using high-quality Micro SD cards rated Class 10 with U3 High Speed or higher.
Ensure a U3 rated memory card is used when recording 4K video. Using a lower- rated card may present data transfer speed issues due to the large file size a 4K video produces. -
The recording time depends on the selected resolution.
Charging
- Ensure the camera is charged completely before first use.
- Keep the device away from children while charging.
- Ensure the camera is switched off when charging. If the camera turns on automatically when connected to a power source please turn it off to complete charging. A camera plugged into power and switched on will not charge.
- The camera should only be charged via the USB port of a computer or a USB power adapter with a maximum capacity of 1100mAh.
- Unplug the USB cable connected to the camera before using the camera.
- The battery life is dependent on the resolution and other settings used as well as outside temperature – up to 90 minutes under optimal conditions.
Safety instructions
WARNING: The camera is not suitable for children under 36 months because
of choking hazards.
WARNING : Always protect your camera from falls, blows, and bumps.
- Keep a sufficient distance from objects that generate strong magnetic fields or radio waves, such as electrical appliances to prevent them from damaging the product or affecting the sound and image quality.
- Store the device cool (at room temperature) in a dry and dust-free location and never expose the product to high temperatures or permanent direct sunlight.
- In the unlikely event of overheating, smoke or unpleasant odors coming from the unit, disconnect it immediately from the charging cable and remove the battery to avoid a fire.
WARNING: Before using the camera in the water, make sure that all lids and closures on the camera and underwater housing are closed and sealed.
- After using it in salty or chlorinated water, clean the case under running tap water and let it dry.
- In order to prevent condensation inside the case or behind the lens, the camera should not be exposed to high temperature and humidity differences
- After use underwater, the housing must be left open to avoid condensation or rusting.
CAMERA DESCRIPTION
CAMERA OPERATION
Installing and removing the battery
-
Correctly install the battery into the camera as suggested by the ‘pins’ in the battery compartment and ‘slots’ in the battery itself.
-
For battery power:
Please refer to the symbol: Full power mode “ ” low power mode “ ”. -
Remove the battery: Open the battery compartment cover and remove the battery by pulling on the tag attached.
Please charge the battery when using the cam for the first time
When using the action camera for the first time, please make sure the
battery is fully charged.
To charge the battery: Connect the camera to a computer or a TYPE C power
adapter with the TYPE C data cable (supplied with the package). During
charging, the status indicator LED remains red. When the battery is full, the
indicator switches off.
Power on/off
Press and hold the power button for 3-5 seconds to turn the camera on/off.
Video and Photo mode switching
There are 2 options to switch between video and photo modes:
- To select your video or photo mode, short press the power/mode button. Tap your preferred mode to enter.
- Swipe up on the touchscreen to show the mode selection.
Tap your preferred mode to enter or tap ‘X’ to return.
Video/Photo General Settings Menu
While in either video or photo standby mode, click the setup icon , to enter
the video/photo settings interface.
Video Mode
After the camera is powered on, the camera’s default mode is video standby
mode.
The last used video function mode will also be active.
Tapping the video settings button will allow you to change the current
resolution and other video settings.
Pressing the “shutter / select” button starts the video recording.
While recording, the status indicator LED flashes blue.
Press the shutter button again to stop the video recording.
When the battery is exhausted, the camera will stop working and shut down
automatically. However, before shutting down, the video currently being
recorded by the camera will be saved automatically.
Time-Lapse Video
Enter the function mode menu and select the “Time Lapse Video” option. When
selected, the camera will return to the video preview screen automatically.
Tap the “Settings” icon and scroll down to the “Timelapse Video” menu option
to select your preferred time-lapse setting.
Slow Motion
Enter the function mode menu and tap the “Slow Motion” mode icon. When
selected, the camera will return to the video preview screen automatically.
Tap the “Settings” icon and tap the “Video Resolution” option to select the
slow-motion resolution.
Photo Mode
There are 2 options to enter the Photo Mode:
- Touch operation: Swipe up to enter the function mode menu where you can choose your photo mode.
- Button operation: Short press the Power / Mode button to enter the function mode menu.
After choosing the photo mode, enter the photo settings menu and select your
preferred resolution, etc.
Time-Lapse Photo
Enter into the function mode menu and touch the “Time Lapse Photo” mode icon,
the camera will return to the Photo preview interface automatically. Click the
“Settings ” icon to enter the photo setting menu and then click the “Photo
Lapse” option to set the time-lapse photo interval.
Photo Burst
Enter the function mode menu and tap the “Photo Burst” mode icon. When
selected the camera will return to the Photo preview screen automatically.
Click the “Settings” icon to enter the photo settings menu and tap “Burst
Settings” to select the number of burst photos per shutter press.
Control Shortcuts
Swipe DOWN to display a control panel that allows you to easily turn on WiFi, lock the screen or turn off the camera.
Playback
If you want to browse video and photo files on the camera, please switch to playback mode: In the video/photo preview screen, click the Playback icon to enter the main interface of the playback menu where you can choose video files or photo files to playback.
WIFI Connection
Before using the WIFI Control function, please install the YUTUPro APP on your
smartphone or tablet.
Please note that wireless transfer of files using the app is not possible for
video with a resolution higher than 1080p. Files using any resolution higher
then 1080p can only be accessed via your computer using a card reader.
Connection steps:
Step 1. On the camera:
-
In the video/photo mode, swipe DOWN to enter the control shortcuts screen.
-
Tap on the WiFi icon to activate the camera’s WiFi function.
The WiFi icon will change from white to green to confirm the WiFi is activated. -
The screen will display the following: SSID: Manta_XXXXXX and Password: 12345678
Leave the camera like this and complete the following steps on your smartphone.
Step 2. On your smartphone/tablet:
-
Open the WiFi settings on your mobile phone to search for the camera device: Manta_xxxxxx from the available wireless networks.
The password to complete the connection is 12345678. -
Exit your WiFi settings menu on your smartphone and open the YUTUPRO APP.
-
Tap ‘Enter Camera’ on the app to connect your camera and smartphone.
The camera screen will display an orange WiFi icon to confirm an active WiFi
connection and your phone will now display a live view from your camera.
Please note: To prolong battery life, please remember to de-activate the WiFi
function after use.
Simply swipe down on the camera touchscreen and tap the WiFi icon to de-
activate the connection.
Note:
Should the camera crash for any reason, please reset the camera by removing
and re-installing the battery.
TECHNICAL SPECIFICATIONS
Image Sensor| Type| CMOS 12MP
Effective Pixels| Approx. 12 Mega Pixels
LCD Display| 2.0″/ Scm Touchscreen
Focusing| Type| Fixed
Exposure| Control| Programmed AE
ISO| Auto. 100, 200, 400, 800, 1600
Video resolution| 4K (3840×2160)30fps
2.7K (2704×1520) 30fps
14409(1920×1440)60fps/30fps 10809(1920×1080) 60fps/30fps
720911280*720)120k6/60Ips/30Ips
Audio| Mic and Speaker built-in
Stabilization
Minimizes small movements that traditional tech can’t detect.| On/Off
Memory| No internal memory
External memory: supports Micro SD Cards up to 64GB (03)
---|---
HDMI OUT| Supports 4K
Image Size| 12M (4000×3000) SM (3840×2160) SM (2560×1920) 3M (2048×1536)
Field of New (FOV):
Indicates the width of the field of view captured by the camera sensor.|
Wide/Medium/Narrow
Scene Mode:
Applies pre-set exposure modes that are optimized for specific scenes|
Multiple scenes
Metering:
Captures better visuals more consistently by adjusting for light sensitivity
from different sources.|
Time-lapse Photo:
The camera will take still pictures at designated intervals.| OFF / 1 Sec. / 2
Sec. / 5 Sec. / 10 Sec. /
30 Sec. / 60 Sec.
---|---
Photo Timer / Self-timer:
Sets a delay timer for selfie or group photos.| OFF / 1 Sec. / 3 Sec. / 5 Sec.
/ 10 Sec.
ISO: Adjusts your camera’s level of sensitivity to available light. The lower
the ISO the less sensitive, the higher the ISO the greater the sensitivity of
the camera.| Auto, 100, 200, 400, 800, 1600
Distortion Correction:
Also known as fish eye adjustment. Mitigates the fisheye effect and adjusts
wide-angle distortion.| On/Off
Image Rotate:
Turns the screen will 180 degrees.| On/Off
Auto Power Off:
Sets a timer allowing the camera to turn off automatically.| OFF / 1 / 3 / S /
10Min
Screensaver:
Set a time interval to automatically turn off the camera’s screen to save the
battery.| OFF / 1 Min / 3Min / 5Min
Beep: Turns on or off the beep sound made by the buttons.| ON / OFF
Win SSID| Manta
Win Password| 12345678
Win Frequency| 2,4 GHZ
Interface| USB TYPE C 3.0: Recharging/File Transfer
Battery| Li-ion rechargeable Battery 1100mAH
Dimensions (WxHxD)| 61x45x36mm
All product specifications are correct at the time of print and are subject to
change without prior notice.
Easypix GmbH reserves the right for errors or omissions.
For technical help please visit our support area on
www.easypix.eu.
CONFORMITY
The manufacturer hereby declares that the CE marking was applied to the
product GoXtreme Rebel in accordance with the basic requirements and other
relevant provisions of the following CE Directives:
2014/53/EU
2011/65/EC RoHs
2014/30/EU EMV
2012/19/EC WEEE
The EC Declaration of Conformity can be downloaded here:
http://www.easypix.info/download/pdf/doc_goxtreme_rebel.pdf
DISPOSAL
Dispose of packaging
For disposal, separate packaging into different types. Cardboard and board
must be disposed of as paper and foil must be recycled.
Disposal of Waste Electrical and Electronic Equipment and/or Battery by
users in private households in the European Union.
This symbol on the product or on the packaging indicates that this cannot be
disposed of as household waste. You must dispose of your waste equipment
and/or battery by handling it over to the applicable take-back scheme for the
recycling of electrical and electronic equipment and/or battery. For more
information about recycling of this equipment and/or battery, please contact
your city office, the shop where you purchased the equipment, or your
household waste disposal service. The recycling of materials will help to
conserve natural resources and ensure that it is recycled in a manner that
protects human health and the environment.
Battery warning
- Never dismantle, crush, or pierce the battery, or allow the battery to short-circuit. Do not expose battery being placed in a high-temperature environment if battery leaks or bulges, stop continue to use.
- Always charge using the charger. Risk of explosion if the battery is replaced by an incorrect type.
- Keep the battery out of reach of children.
- Batteries may explode if exposed to naked fire. Never dispose of batteries in a fire.
- Disposed of used batteries observing local regulations.
- Before disposing of the device, please remove the battery.
The camera is not suitable for children under 3 years because of choking hazards.
