VE06 Original Laptop Notebook Battery User Guide

VE06 Original Laptop Notebook Battery

The DDLockApp is free to download. There’s no subscription fee to register our Web management system.

HOW TO REGISTER

Step 1
Download the “DDLock” App in Google Play or App Store.

Step 2
Tap on register to get started

Step 3

• Fill out the information and tap “Get Code”. The email inbox you registered will be sent a verification code to verify your account.
• Put the code you received, and tap on”Register” to complete.

Notes:
The DD Lock App is required to operate the lock. After the lock is properly installed, make sure this step is performed by the lock owner.

PAIRING YOUR LOCK

Step 1

Step 2

Step 3

Step 4

Note: If the lock is not found in the list, please review the following tips.

1. Reset your lock and make sure the original master code is 123456.
2. Check if the Bluetooth is turned on in your phone’s settings.
3. During the pairing, wake up the keypad screen by touching it with your palm and keep the screen always on.

Scan the QR code to watch the pairing video

ADMIN PASSCODE MANAGEMENT

Notes:
After pairing the lock with DDLock, the admin passcode will be changed to a random 7-digit number, you can check the new admin passcode by following the picture guide above. You can change It to your administrator password.

LOCK PAGE OVERVIEW

• Unlock/Lock
  Unlock/Lock using the phone’s Bluetooth

• eKeys
  View and modify current eKeys, set up and send eKeys

• Passcodes
  Generate 6 different types of passcodes

• Records
  Check to unlock/lock records

• Authorized Admin
  Create and edit admins

• Settings
  View and modify settings

• Cards
  Set up your cards here

• Fingerprints Page
  Set up fingerprints (06 doesn’t have Fingerprints page.)

Notes:
Some of these icons may not appear if the Gateway is not connected to the lock. The lock only works with Veise Gateway G2.

APP UNLOCK/LOCK

• To unlock the lock, tap this icon once.
• To lock the lock, press and hold on this icon.

Note: It only works when your phone Is close to the smart lock In Bluetooth range.

PASSCODES

Step 1
To access the passcode menu, tap on the “Passcode” icon. This will take you to the passcode page.

Step 2
Tap on “Generate Passcode”

Step 3
Enter a name for this Passcode

The definition of 6 types of passcodes

• Permanent Lasts permanently
• Timed Lasts for scheduled hours
• One-time One time use
• Erase Erases all codes on the lock
• Custom Customize a code per your need, such as 2638 (set it as permanent or timed)
• Recurring Lasts for scheduled hours weekly

In Passcodes, choose one passcode and you can edit the passcode’s number, validity and name. The code can also be deleted and view the records.

Note:
To customize one passcode, it requires your phone to be close to the smart lock at 32 feet (within Bluetooth range), You could also choose to connect the lock to the Veise gateway G2.

CARDS

Step 1

Step 2

Step 3

• Choose the validity period of the lock. Once the lock says “Please swipe your card”, place the card against 5 on the keypad.
• If you hear a long beep, the card can be used to unlock your lock.

Note:
It only supports adding 13.56MHz cards, such as mifare cards, NFC cards, Desfire cards and EV1 cards.

EKEYS

Step 1
eKeys works by sharing access to your lock with another DDLock account. eKey recipients will be able to use their phone to unlock/lock the lock.

Step 2
Tap on “Send eKoy”

Step 3
Enter the recipient’s user name. It will be the phone number or email address during registration. eKeys do not require wifi or bluetooth to be sent or revoked.

Note:
It is strongly recommended that the recipient first register an account using the DDLock App.

FINGERPRINTS

Step 1
Tap on Fingerprints

Step 2
Tap on “Add Fingerprints”

Step 3
Select Fingerprint type per your needs

Step 4

• Follow the instructions in the App, and place your finger on the fingerprint scanner for 4 times.
• Please place the different angles of your prints and press a little bit harder on the scanner each time.

Note: Have an issue with the fingerprint?

1. Make sure the scanner surface is clean and dry.
2. Try different fingers.
3. Make sure your finger is clean and dry.
4. Take out the batteries, wait a minute and place them back.

AUTHORIZED ADMIN

Authorized Admin is similar to eKeys. An authorized admin can create and edit all access methods (passcodes, fingerprints, eKeys, etc.). eKeys only lock or unlock the lock.

Step 1

1. Unlock/lock via the App.
2. Generate, Edit, and Delete passcodes and IC cards.
3. Adjust settings like passage mode, auto-lock timer, & turn on/off the lock sound.

Step 2
Tap on”Authorized Admin” and Set Timed Admin or Permanent Admin.

Note:
If the authorized admin has been created or deleted, it doesn’t work, please slide down the page to refresh.

PASSAGE MODE & AUTO-LOCK

Step 1
Enable Auto Lock, the lock will be locked automatically in 5 seconds by default. The Auto Lock time can be changed in the Auto-Lock timer. Go to Settings as shown in the image to get more information regarding Auto Lock.

Step 2
Settings >Passage Mode

Step 3
Enable Passage Mode, the lock will stay Unlocked until it’s locked manually. In Passage Mode, Auto-lock will be disabled.

Note:
When setting passage mode or auto lock, It requires your phone to be close to the smart lock at 32 feet (within Bluetooth range), You could also choose to connect the lock to the Veise gateway G2.

LOCK SETTINGS

• In Basics, you can view and change lock information such as Lock Name.
• Gateway shows signal strength if Gateway is connected.
• With Remote Unlock on and a Gateway connected, you can remotely unlock/lock your lock.
• Lock Sound turns on or off the sound of the touch keypad.
• Import from another lock allows for the transfer of passcodes and cards from one lock to another.
• Delete will remove the lock from your account and clear any settings on the lock. It requires your phone close to the lock.

RECORDS

Important

1. Out of Bluetooth range or no gateway connected, the records of passcode, fingerprint, and card unlocking are not in the list timely. Only eKey unlocking is in real-time records.
2. After pairing successfully, click on the refresh button and wait a few minutes to check the real-time records. You could also connect the lock to the Veise gateway G2, then the records will push in real time.

DOOR LOCK WEB MANAGEMENT SYSTEM

• The web management system is set up for managing your door lock, such as sending the ekey of your door lock, generating user passwords, issuing cards, unlocking/locking remotely (with Wi-Fi gateway), and exporting logs.
• Web management system address: https://ddlocksecurity.com.

Log in

• Register in the DDLock App.
• Enter the registered username and password to log in.

Unlock/Lock remotely (with G2 gateway) Wi-Fi gateway is required to unlock/lock remotely.

Send ekey
Generate a ekey and send it to your family or friends.

Send password
Generate multiple scheduled passwords and send them to other users.

Issue card (with G2 gateway)
Issue an existing card, add a new card via card reader (card reader sold separately), share cards, and delete cards.

Export logs

Check unlock/lock recordings

GATEWAY G2 SOLD SEPARATELY

Connect to Veise gateway G2, it will support:

• Unlock/Lock remotely in the App
• Work with Google Assistant, Alexa
• Generate, modify and delete all types of passwords remotely
• Web portal management (remote functions)
• Push real-time messages and view real-time records
• View smart lock status
• Check battery level remotely

Integrations
Our locks work with the following software:

FAQs

Q1: Why can't I use the master code 123456# to unlock after pairing with the App?

A1: After pairing successfully, the master code will be changed to a random 7-digit number, and you can change it to your master code in the App(Settings

Basics>Admin passcode).

Q2: Why am I unable to check the latest records in the App?

A2: When it's out of the Bluetooth range or the Veise gateway G2 is not connected, the records of passcode, fingerprint, and card unlocking are not in the list timely. Only eKey unlocking is in real-time records. After the Bluetooth or Veise gateway G2 is connected, go to Records>tap the icon on the up-right corner>refresh records.

Q3: How to share one account with others?

A3: To share one account with others, please create authorized admins. It requires the authorized admin recipients to have downloaded the DD Lock App and registered their usernames and passwords.

Q4: How to edit, delete, or create custom codes remotely?

A4: All passcodes can be generated remotely without a gateway; however, editing, deleting, or creating custom passcodes requires the Veise gateway G2 or being within Bluetooth range of the lock.

Q5: Why is a deleted code working?

A5: There may be a display error in the App. Please follow these steps to fix it: Go to Settings > Upload Data > Tap on Start to upload the lock's data.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>