mixcder E7 Wireless Headphones User Manual

User Manual
Model: E7
Wireless Headphones

Importer
Alza.cz a.s.
www.alza.cz

Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully before first use and keep this user manual for future reference. Pay particular attention to the safety instructions. If you have any questions or comments about the device, please contact the customer line.
✉ www.alza.co.uk/kontakt
✆ +44 (0)203 514 4411

Introduction

Thank you for purchasing the Mixcder E7 Wireless Active Noise Cancelling Headphone. Mixcder E7 professional ANC technology keeps noise out and music in, so you can get deeper into your music, your work, or whatever you want to focus on. Mixcder E7 features Bluetooth 5.0 for unparalleled sound quality, fewer drop-outs, lower latency & stable connection to deliver a skip-free listening experience. Large 40mm drivers with high dynamic bass responses bring you amazing audio enjoyment. Built-in 500mAh rechargeable battery provides up to 25h sufficient music playtime, while charges for 5-8 minutes to get 2-3 hours playtime. Ergonomic & protein leather ear cushions with 90° swivel ensure pillow comfort and a snug fit. We use fashionable color coating for your perfect look!
Note: Please read the user manual carefully before using it, and keep it properly for future reference.

Package Contents

1× Wireless Headphones
1× Micro USB Charging Cable
1× 3.5mm Audio Cable
1× User Manual
1× Compact Carrying Case

Product Overview

1. Microphone
2. 3.5mm Line-in Port
3. Power Button
4. Previous Track / Vol-| 5. Next track / Vol+
6. LED Indicator /
Charging LED
7. Micro USB Interface for charging
8 ANC LED Indicator| 9. ANC Switch
10. Micro USB
Charging Cable
11. 3.5mm Audio
Cable
---|---|---

Charging

Use the supplied micro USB charging cable to recharge the headphone. It takes about 1.5 hours for the first charge and only 1 hour for a subsequent charge. The headphone LED turns to solid red during charging. When the battery is fully charged, the LED turns off. In order not to affect the charging time, please turn off the wireless function during charging, but you can use the audio cable.
When the battery is low, the LED indicator lights up red. At the same time, the headset also provides a low battery warning tone.
Note: It is strongly recommended fully charge for the first use. Playtime varies according to volume level and audio content.

Pairing with Wireless Devices

Pairing the Headphones with a Computer

Before pairing the headphones with your computer, please make sure your computer or laptop has the built-in wireless feature. If not, you must purchase a Wireless dongle, preferably version 2.1 or above.

1.  Make sure the headphones are off.
2. Turn on wireless capability on the computer.
3. The “Search new device” screen will be displayed.
4. Do not place both devices more than 1 meter away from each other.
5. Press and hold the power button on the headphone until it powers on but don’t let go just yet. Continue holding down on the power button until you see the LED indicator flashes blue and red alternately, which means your headphone is in “pairing mode” waiting to be paired with your device. You will hear a prompt.
6. As soon as the computer system detects the new device, please select “Mixcder E7” to pair. Once successfully paired, the LED turns to solid blue. You will hear a prompt.

Pairing the Headphones with a Phone

1. Make sure the headphones are off.
2. Do not place both devices more than 1 meter away from each other.
3. Press and hold the power button on the headphones until it powers on but don’t let go just yet. Continue holding down on the power button until you see the LED indicator flash blue and red alternately, which means your headphones are in pairing mode waiting to be paired with your device. You will hear a prompt.
4. Turn on wireless capability on your phone and search for new devices.
5. Select the “Mixdcer E7” to pair. Once successfully paired, the LED turns to solid blue. You will hear a prompt.

Connecting to Paired Devices

Mixcder E7 will pair with the last paired device automatically when turning on. Because of different systems, some computers or laptops may need to be manually paired every time.

Active Noise Cancelling

Mixcder E7 contains a noise-canceling circuit. Noise mainly from airplanes, buses or trains is effectively reduced.

1. The noise-canceling effect may not be pronounced in a very quiet environment as some noise may be heard.
2. The noise-canceling effect may vary depending on how you wear the headphones.
3. The noise-canceling function works for noise in the low-frequency band primarily. Although noise is reduced, it is not  canceled out completely.
4. When you use the headphones in a train or a car, noise may occur depending on street conditions.

Making and Answering a Call

Making a Call

1.  Make sure the headphones are paired with the mobile phone. Dial through the mobile phone and press the call button on the phone.
2. To end the call, press the power button once again or also end the call directly by the phone.

Answering a Call

Make sure the headphones are paired with your phone. Refer to chapter 5: “Pairing with Wireless Devices”.

1.  Press the power button on your headphones to answer the call through headphones. If there is a music playback, it will pause.
2. To end the call, press the power button once again or also end the call directly by the phone.
3. As soon as the call is ended, the music will continue to play automatically.

Used as a Wired Headphones

There is a 3.5mm audio port on the left side of ear cup in which you can plug the included audio cable. It enables you to connect E7 to other devices via a 3.5mm audio cable. When the headphones battery is low, you can still enjoy the music without worrying about the battery.
Note: The microphone can’t work when used as wired headphones.

Taking Care of Your Headphones

• Store the headphones in the carrying case and in a dry place when it powers off.
• If you don’t use the headphones for a long period, charge the battery every two months for one hour.
• Use a dry cloth for cleaning if needed.
• Avoid dropping the headphones from high places or on hard surfaces.
• Avoid exposing the headphones to extreme temperatures (recommended storage temperature is from -40 °C to 80 °C).
• The headphones are NOT waterproof. Avoid exposing the headphones to rain or getting liquids into any button port or other opening.
• Please don’t twist or bend the earphones. This may cause permanent deformation.
• The built-in battery can’t be disposed into the fire to avoid explosion.

Protecting Your Hearing

The headphones are held close to your ears, so loud sounds pose a potential hearing risk. It is highly recommended that set a low volume level before putting on the headphones are and avoid exposing yourself continuously to high volumes. If you need to use the headphones for a long period, rest ten minutes for a half-hour use.

Controls

blue light flash and hear “power on”.
Power off| Press and hold the power button for 3 seconds, and you will hear “power off”.
Pairing| Press and hold the power button for about 5 seconds till the red and blue light flash alternatively, and you will hear “pairing”.
Increase volume| Press the volume up v+ button.
Decrease volume| Press the volume down v- button.
Play media| Press the power button.
Pause/restart media playback| Press the power button.
Skip to the next track| Press and hold the V+ button for 1-2 seconds.
Skip to the previous track| Press and hold the V- button for 1-2 seconds.
Answer a call| When a call rings, press the power button.
End a call| Press the power button.
ANC On| Push the ANC switch to ON, blue lights on.
ANC Off| Push the ANC switch to OFF, blue lights off.

Note: There will be an alert tone when the volume reaches the maximum level.

Troubleshooting

Q: The headphones cannot be turned on.
A: The battery may be flat. Please recharge the battery and try again. Refer to chapter 4: “Charging”.
Q: Why don’t the headphones pair with the mobile phone?
A: Please check the following:

• Check that the headphones are fully charged.
• Make sure that the mobile phone’s wireless function is on. You can clear all connection history on your phone.
• Make sure other paired devices’ wireless function is turned off.
• Make sure the two devices are in the effective pairing range (10m).
• Make sure that there is no obstacle between the headphones and the mobile phone, such as electronic equipment and a wall.
• Furthermore, make sure that the headphones are in pairing mode and pair it with the phone again.

Q: There is some noise.
A: Wireless is a radio technology, so it is sensitive to obstacles between the headphones and the pairing device. Make sure that there is no obstacle between the two devices within 10 meters.
Q: I can’t hear sound.
A: Please check the following:

• Try increasing the volume.
• Make sure that the wireless function is on and whether the two devices are connected and within 33 feet/10 meters.

Q: My mobile phone or computer cannot find the headphones.
A: Please check that the headphones are in pairing mode. Refer the chapter 5: “Pairing with Wireless Devices”. Sometimes when the headphones are connected to too many wireless devices, it cannot search and pair effectively. Or your mobile phone and computer are already connected to many other devices. Try removing some connections before searching the headphones.

Specifications

Wireless

Tech.

| Wireless Version Wireless Distance| Bluetooth v5.0
Wireless Version Wireless Distance| 10m
Transmission Frequency| 2.402GHz-2.480GHz
Support Profile Pairing Name| HSP/HFP/A2DP/AVRCP
Support Profile Pairing Name| Mixdcer E7
Battery Spec.| Battery Type| Built-in 500 mAh rechargeable lithium battery (supports fast charge)
Playtime| About 30-hour talk/music time (ANC OFF)
About 22-hour task/music time(ANC ON)
Standby Time Charging Time| More than 2500 hours
Standby Time Charging Time| About 1 hour
Operating temperature| -10 °C to 45 °C

Note: Features and technical specifications are subject to change without notice, we apologize for any inconvenience.

Warranty Conditions

A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase.

The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized:

• Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the product.
• Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g. during transport, cleaning by inappropriate means, etc.).
• Natural wear and aging of consumables or components during use (such as batteries, etc.).
• Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage, and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
• If anyone has made modifications, modifications, alterations to the design or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original components.

EU Declaration of Conformity

Identification data of the manufacturer’s / importer’s authorized representative:
Importer: Alza.cz a.s.
Registered office: Jankovcova 1522/53, Holešovice, 170 00 Prague 7
IČO: 27082440
The subject of the declaration:
Title: Wireless headphones
Model / Type: Mixcder E7
The above product has been tested in accordance with the standard (s) used to demonstrate compliance with the essential requirements laid down in the Directive (s):
Directive No. (EU) 2014/53/EU
Directive No. 2011/65/EU as amended 2015/863/EU
Prague, 23.9.2020

WEEE

This product must not be disposed of as normal household waste in accordance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE – 2012/19 / EU). Instead, it shall be returned to the place of purchase or handed over to a public collection point for the recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. Contact your local authority or the nearest collection point for further details. Improper disposal of this type of waste may result in fines in accordance with national regulations.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>