CHAMPION 200990 4500W Wireless Remote Start Inverter Generator User Guide

June 6, 2024
Champion

CHAMPION logoQuickstart logo

QUICKSTART GUIDE
200990
4500W Wireless Remote Start Inverter GeneratorCHAMPION 200990 4500W
Wireless Remote Start

WARNING
Read the ENTIRE operator’s manual to become familiar with the features of the product before operating.
Failure to operate the product correctly can result in damage to the product, personal property and cause serious injury or even death.
www.championpowerequipment.com
© Champion Power Equipment 2021.
All Rights Reserved.

Set-Up

  1. Open shipping carton. Assembly > UnpackingCHAMPION 200990 4500W Wireless Remote Start-Unpacking

  2. Shipping Support. Assembly > Remove Shipping Support Hardware.CHAMPION 200990 4500W Wireless Remote Start-Support Hardware

  3. Connect the battery. Assembly > Connect the Battery.
    Push two halves of the battery connector together tightly.CHAMPION 200990
4500W Wireless Remote Start-Connect the battery

  4. Add oil. Assembly > Add Engine Oil.
    Recommended: 10W-30, up to 16.9 fl. oz. (500 ml) DO NOT overfill.CHAMPION
200990 4500W Wireless Remote Start- Add Engine Oil

  5. Move the generator outdoors.
    Move generator to an open, outdoor area. Point exhaust away. Never run a generator in enclosed areas (e.g., not in house or garage).CHAMPION 200990
4500W Wireless Remote Start-Move
    Keep all objects at least 5 feet (1.5 m) from the generator. The heat from the muffler and exhaust gas can ignite combustible materials.

  6. Add fuel. Assembly > Add Fuel DO NOT use E15 or E85.CHAMPION 200990 4500W Wireless Remote Start-Start Up

  7. DO NOT plug in any electrical devices.CHAMPION 200990 4500W Wireless Remote Start-DO NOT plug
    NEVER START OR STOP THE GENERATOR WITH ELECTRICAL DEVICES CONNECTED OR TURNED ON!

  8. 8a. Wireless Start
    1. Push the battery switch to the “ON” position.
    2. Turn the EZ Start dial to the full “ON” position.
    3. Press and release the “START” button on the remote key fob.CHAMPION
200990 4500W Wireless Remote Start-Wireless Start 8b. Electric Start
    1. Push the battery switch to the “ON” position.
    2. Turn the EZ Start dial to the full “ON” position.
    3. Push the choke button.
    4. Press and hold ignition switch on EZ Start Dial.
    5. Push the choke button.

Startup

8c. Manual Start

  1. Push the battery switch to the “ON” position.
  2. Turn the EZ Start dial to the full “ON” position.
  3. Push the choke button.
  4.  Pull the recoil to start the engine.
  5.  Push the choke button.CHAMPION 200990 4500W Wireless Remote Start-Electric Start

9. Plugin. Operation > Connecting Electrical Loads.CHAMPION 200990 4500W
Wireless Remote Start-Plug inCHAMPION 200990 4500W Wireless Remote Start-YouTube
channel

Visit our YouTube channel to watch our how-to videos and subscribe to view our latest videos on our Champion Power Equipment products!

NEED ASSISTAnCE OR HAVE A QUESTION?
GIVE US A CALL.

1-877-338-0999
CHAMPIONPOWEREQUNIPMENT.COM

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Champion User Manuals

Related Manuals