CHAMPION 200964 3500W Wireless Start Generator User Guide

June 6, 2024
Champion

**CHAMPION 200964 3500W Wireless Start Generator User Guide

**

WARNING:
Read the ENTIRE operator’s manual to become familiar with the
features of the product before operating.
Failure to operate the product correctly can result in damage to
the product, personal property and cause serious injury or even death.

Set Up

1: Open shipping carton.  Assembly > Unboxing
Box

2: Remove brackets. Assembly > Remove Shipping Support Brackets.
Remove Brackets

3: Attach wheel kit. Assembly > Install Wheel Kit
Attach wheel kitAttach wheel
kit Connect The
Battery

4: Connect the battery. Assembly > Connect the Battery.
Cut cable tie on each side of battery connector.
Push two halves of battery connector together tightly.
Connect The Battery

5: Add oil. Assembly > Add Engine Oil.
Recommended: 10W-30, up to 16.9 fl. oz. (500 ml). DO NOT overfill.
MAKE SURE SHIPPING BRACKETS ARE REMOVED BEFORE ADDING OIL.
Add Oil

Start Up

6: Move the generator outdoors
Move generator to an open, outdoor area.
Point exhaust away. Never run generator in enclosed areas (e.g., not in house or garage).
Moving Generator
Keep all objects at least 5 feet (1.5 m) from generator. Heat from the muffler and exhaust gas can ignite combustible materials

7: Add fuel. Assembly > Add Fuel
DO NOT use E15 or E85.
Add Fuel

8: DO NOT plug in any electrical devices.

NEVER START OR STOP THE GENERATOR WITH ELECTRICAL DEVICES CONNECTED OR TURNED ON!

9: Turn the fuel valve “ON”.
Fuel Valve

10: Wireless Start

  1. 1. Push the battery switch to the “ON” position.
  2. Push the ignition switch to the “ON” position.
  3. Press and release the “START” button on the remote control.
    Wireless Start

10a: Electric Start

  1. Push the battery switch to the “ON” position.
  2. Press and hold the ignition switch to the “START” position.
    Electric Start

10b: Manual Start

  1. Move the choke lever to the “CHOKE” position.
  2. Push the ignition switch to the “ON” position.
  3. Pull the starter cord.
  4. Move the choke lever to the “RUN” position.
    Manual Start

11: Plug in. Operation > Connecting Electrical Loads.
Plug In

Visit our YouTube channel to watch our how-to videos and subscribe to view our latest videos on our Champion Power Equipment products!

Youtube Icon

NEED ASSISTANCE OR HAVE A QUESTION?
GIVE US A CALL.
1•877•338•0999
CHAMPIONPOWEREQUIPMENT.COM

Company Name

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Champion User Manuals

Related Manuals