JBL LIVE FREE NC+ True Wireless Stereo Earbuds User Guide
- June 6, 2024
- JBL
Table of Contents
LIVE FREE NC+TWS
QUICKSTART GUIDE
WHAT’S IN THE BOX
SCAN ME
https://register.jbl.com?utm_medium=US &utm_source=QSG
APP
HOW TO WEAR
FIST TIME USE
POWER ON& CONNECT
DUAL CONNECT + SYNC
POWER OFF
MANUAL CONTROLS
| CONNECT TO A BLUETOOT DEVICE | RECONNECT LEFT & RIGHT |
|---|---|
RESET
BUTTON COMMAND
- Enable advance controls by connecting your JBL LIVE FREE NC+ TWS to JBL Headphones App .
** ENABLE VOICE ASSISTANT THROUGH JBL HEADPHONES APP AND ASSIGN IT TO YOUR PREFERRED EARBUD (L/R).
AUTOPLAY/PAUSE
DO MORE WITH THE APP
CHARGING
| |
---|---|---
LEA BEHAVIORS
WATERPROOF IPX7
TECH SPEC
| Model: | LIVE FREE NC+ TWS |
|---|---|
| Driver Size: | 6.8 mm/0.27” Dynamic Driver |
| Power supply: | 5 V 1 A |
| Earpiece: | 7 g per pc (14 g combined) / 0.015 lbs per pc (0.03 lbs combined) |
| Charging case: | 40 g / 0.088 lbs |
| Headset battery type: | Lithium-ion polymer (3.7 V, 50 mAh) |
| Charging case battery type: | Lithium-ion polymer (3.7 V, 300 mAh) |
| Charging time: | 2 hrs from empty |
| Music playtime with BT on and ANC off : | up to 7 hrs |
| Music playtime with BT on and ANC on : | up to 6 hrs |
| Frequency Response: | 20 Hz – 20 kHz |
| Impedance: | 16 ohm |
| Sensitivity: | 96 dB SPL@1 kHz |
| Maximum SPL: | 94 dB |
| Microphone sensitivity: | -26 dBV/Pa@1 kHz |
| Bluetooth version: Bluetooth profile version: | 5.1 |
| Bluetooth transmitter frequency range: | A2DP V1.3, AVRCP V1.6, HFP V1.7 |
| Bluetooth version: Bluetooth profile version: | 2400 – 2483.5 MHz |
| Bluetooth transmitter power: | <10 dBm (EIRP) |
| Bluetooth transmitter modulation: | GFSK, π/4 DQPSK, 8DPSK |
| Maximum Operation temperature: | 45 °C |
TO PROLONG BATTERY LIFESPAN, FULLY CHARGE AT LEAST ONCE EVERY 3 MONTHS. BATTERY LIFE VARIES BY USE AND SETTING.
IC RF Exposure Information and Statement
The SAR limit of Canada (C) is 1.6 W/kg averaged over one gram of tissue.
Device types:
(IC: 6132A-LIVEFREENTP) has also been tested against this SAR limit According
to this standard, the highest SAR value reported during
product certification for head use is 0.33W/Kg.
The device was tested for typical bodily operations where the product was kept
0 mm from the head. To maintain compliance with IC RF exposure requirements,
use accessories that maintain a separation distance of 0mm between the user’s
head and the back of the headset. The use of belt clips, holsters and similar
accessories shall not contain metal parts in its assembly. The use of
accessories that do not meet these requirements may not comply with IC RF
exposure requirements and should be avoided.
Head operation
The device was subjected to a typical head manipulation test. In order to
comply with RF exposure requirements, a minimum separation distance of 0 cm
must be maintained between the user’s ear and the product (including the
antenna). Head exposure that does not meet these requirements may not meet RF
exposure requirements and should be avoided. Use only the supplied or approved
antenna.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.
Google, Android, and Google Play are trademarks of Google LLC.
Amazon, Alexa, Amazon Music, and all related logos are trademarks of Amazon,
Inc. or its affiliates.
Alexa is not available in all languages and countries, Alexa features and
functionality may vary by location.
See www.amazon.com/alexa-availability for details.
WPC Receiver Band: 110K-205KHz
HP_JBL_Live Free NC+ TWS_QSG_CR_V23_Stitched