onn 9764402 Camera Glass Protector User Guide
- June 6, 2024
- Onn
Table of Contents
Camera Glass Protector
Quick Start Guide
Cleaning
Remove any case from your device to avoid interference with the application process.
Cleaning the Camera
Clean the device screen with the wet wipe.
Dry the Screen
Dry with the microfiber cloth. Ensure the screen is completely dry before proceeding.
Remove Dust
Use the dust removal sticker to remove any fine particles from the device screen.
continued on the back
Screen Protector Application
Remove Plastic Backer
Peel the backer layer off of the glass.
Note: Do not touch adhesive.
Align to Lense
Hold the tabs on both sides and align over the camera lenses.
Place the Glass
Slowly place the protector down over the camera lenses.
Remove Safety Film
Peel back the clear protective film from both sides using the tabs.
Final Steps
Remove Air Bubbles
Remove any air bubbles by pushing them outward towards the edges.
Wipe Clean
Use microfiber cloth to remove any fingerprints.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>