TruVoice BT60 Wireless Bluetooth Headset with Noise Canceling Microphone User Guide
- June 6, 2024
- TruVoice
Table of Contents
TruVoice BT60 Wireless Bluetooth Headset with Noise Canceling Microphone
Pairing with Devices
OPTION 1 (Headset and USB Dongle Required) – Use any of the 2 guides below if your PC does not have built in Bluetooth
Computer Only
- Plug the Bluetooth dongle into an available port on your computer I softphone
- Tum on BT50160 (Button can be found at the bottom of the Earpiece)
- Headset will connect to PC I Sottphone (please allow up to 30 seconds)
Cell Phone and Computer
- Tum on Bluetooth on Cell Phone
- Tum on BTS0/60 (Button can be found at the bottom of the Earpiece)
- Once your Cell Phone finds the BTS0/60 press connect and pair (it can take up to 20 seconds for the Cell Phone to locate the headset)
- Once Paired tum the Bluetooth off on Cell Phone
- Plug the Bluetooth dongle into an available port on your computer/ softphone
- Headset will connect to PC/ Sotlphone (please allow up to 30 seconds)
- Switch the Bluetooth back on the Cell phone and connect to BT50/BT60
- Once Connected to the Cell Phone the headset will now work with both devices
OPTION 2 (Headset Only Required) – Use any of the 2 guides below if your PC Includes built in Bluetooth
Connecting to a Single Bluetooth Enabled Device (Cell Phone or PC)
- Tum on Bluetooth on Device
- Turn on BTS0/60 (Button can be found at the bottom of the Ear Piece)
- Go into the Bluetooth settings and scan for new Bluetooth Devices (it can take up to 20 seconds for the Device to locate the headset)
- Once Located please connect to the BTS0/60
Connecting to Bluetooth Enabled Device (Cell Phone or PC)
- Tum on Bluetooth on Device you are connecting
- Turn on BTS0/60 (Button can be found at the bottom of the Ear Piece)
- Go into the Bluetooth settings and scan for new Bluetooth Devices (it can take up to 20 seconds for the Device lo locate the headset)
- Once Located please connect to the BTS0/60
- Tum Bluetooth off on the device you just connected
- Tum on Bluetooth on Device you are connecting to Second
- Locate BTS0/60 in Bluetooth Settings on your second device and connect
- Go back to the first device and tum Bluetooth back on. Once this is turned on reconnect to BTS0/60
You are now paired to both Bluetooth devices
PLEASE NOTE: If you have tried the above instructions and cannot get the headset to connect please make sure you unpair the BTS0/60 headset from all devices, tum the headset off and remove the Bluetooth dongle from the computer and start the setup instructions again.
Prompt Tone Introduction
| Headset Status | Tone |
|---|---|
| Power on | Power on |
| Power off | Power off |
| Pairing Successfully | Connected |
| Volume up/down | “toot” |
| Battery low | “toot” every 5 minutes |
| Mic Mute | “toot” every 3 seconds |
Headset LED Indicators
| Headset Status | LED Status |
|---|---|
| Pairing Mode | Light flashes blue and red alternately |
| Pairing Successfully | Light flashes blue repeatedly every 5 seconds |
| Battery Low | Light flashes red rapidly |
| Charging Mode | Red light continuously on |
| Fully Charged | Blue light continuously on |
| Audio Status | Blue light in the state of breathing, and the red light off |
| Call(Busy)Status | Red light in the state of breathing and the blue light off |
Button Functions
- Pairing Name: TruVoice BTSO/ TruVoice BT60
- Bluetooth Speification: CSR-V5.0, dual mode, downward compatible
- Frequency Range: 2.4GHz-2.480GHz
- Support Protocols: A2DP, AVRCP, HFP, AAC, etc
- Two Bluetooth devices can be connected at the same time
- Transmission Distance: up to 30 meters (Transmission distance depends on the environment and Bluetooth device)
- Maximum Talk Time: 20 hours
- Standby time: 200hours
- Working Temperature: 0°C __ to 45°C
Speaker:
- Frequency: 20Hz-20KHz, Hi-fi
- Distortion: :S1%
Sound Channel:
- Binaural: Stereo
- Monaural: Mono
Microphone:
- Microphone: Directional noise reduction microphone
- Acoustic Noise Canceling Structure
- Crystal clear sound and voice (DSP)
Headset Battery:
- Type: Lithium-ion polymer
- Battery Capacity: 320mAh
- Charging Voltage: 5V DC
- Life Time: Minimum recharging 1000 times
- Operating Temperature: -10°C to +60°C
- Charging Time: 2 hours
- Charging Interface: Micro USB
Charging Base:
- Net Weight: 115g
Headset Net Weight:
- TruVoice BTSO 70g
- TruVoice BT60 95g
CAUTION:
- Most Cell Phones have headset power on screen display. When Headset battery is low, the headset will beep once in 5 minutes and the indicator will tum red. Please charge it in time
- Do not connect the full-charged headset to the charging circuit for a long time Overcharging will shorten battery life
- Please keep the headset battery safe. Do not put the battery or the headset into fire or water to avoid explosion
- Do not use headset with high volume for extra long lime, which may cause hearing Always listen at a moderate level
- Don’t charge with high voltage device, which may cause damage to the headset
- Make sure that the headset is fully charged before using it if unused for a long time
- Lifetime of the battery will be significantly reduced if your device is left uncharged for a long time. We therefore recommend that you recharge your device at least once a year
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>