Efolen Bluetooth Call Smartwatch for Women Fitness Tracker Watch User Manual
- June 6, 2024
- Efolen
Table of Contents
APP “Lufitcode” Setting Guide
How to make the Watch works properly and not disconnect?
1. Pls make sure the software version of your smartphone is over Android 5.0
or iOS9.0 or above, and Bluetooth 4.0 or above.
2. Pls check whether the Watch was connected to another phone or not, swipe
down the Watch’s face, and check icon “BLE” is green or gray. If green color,
it means Watch was connected with other phones, please unbind it first.
3. Please do not connect the watch by smartphone’s Bluetooth, or else your
watch will not connect to the app and many features of the watch may not work
properly. If you have connected by Bluetooth already, please forget the device
first and connect by app again.
4. Pls make sure you have enabled the Bluetooth function and GPS Location of
your phone turn on. (we recommend you exit all of the other APP and reopen
them). And then you should “ADD DEVICE” from the app, not the Bluetooth
setting.
5. There is no barrier between the Watch and your smartphone. While
connecting, pls place them together. The normal direct line is 10meters and
barrier-free.
6. Please charge in time when the watch is in low battery power. When its
battery is lower than 10%, the Bluetooth function will be turned off.
7. Make sure the watch screen is on when the mobile phone APP is searching
Bluetooth device. When the watch screen lights up, the Bluetooth of the watch
will send a 30s broadcast signal, and the watch will reconnect within 30s.
8. If the above steps still not works, please swipe down the
watch–Settings–Reset–Turn off. Delete the app on your smartphone and Turn off
your phone and Restart. (If iPhone, pls ignore the phone
settings—Bluetooth—-“SmartWatch”)
9. Pls reinstall App “Lufitcode”, ①always ALLOW app to acquire phone’s info,
②set background running permission, ③ignore battery-saving ④set the app to APP
whitelist. PLEASE carefully check our background setting video f Samsung
phones. Here is the video link:
https://www.amazon.com/vdp/041da12492fb46a9b307137f041621ba?product=B095C38BCB
For Android phones: Android 5.0 and Bluetooth 4.0 or above
Search“Lufitcode” in GooglePlay or Huawei store or Scan QR code in the user
manual
1. Permission Setting:
①Turn on Bluetooth
①Agree APP Privacy and User Agreement
①Allow “Lufitcode” to use Location Permission (Android 6.0 or above system
should turn on GPS).
Note : Not allowing location may cause matter on Dysfunction such as
weather update or else
2. Connect with Watch
①Open smartphone Bluetooth in APP Add device
①Search “SmartWatch”
①Connect with “SmartWatch”
3. APP Keep Running Permission:
A. Confirm that your device is running Android 5.0, IOS10.0 or above, with
Bluetooth 4.0 or above support.
B. GPS should be turned on for devices running Android 6.0 or above.
C. When Reinstalled APP, and its app background running permission should be
set again.
①Do Not turn on battery saving for this app
①Ignore battery saving
①Set “Lufitcode” auto background keep running
①Set APP to white list
Note : Keep APP background running Always Or Never Stop. Otherwise, your
watch may disconnect or reset.
4. Notification Permission:
①Allow APP read contact permissions
①Allow read call records
①Allow APP acquire Camera and Video usage
①Always Allow make calls and get mobile information
①Allow APP read and write photos and files
①Enable notification—Enable notification permission, allow “Lufitcode” read
all notifications
Note: Not Allow APP some usage may cause missing message. The watch’s
notifications are always in sync with smartphone notifications on its
homepage.
5. Network Access
①Allow “Lufitcode” uses network access, so you can get Weather updates on your
watch.
For iPhone: IOS 9.0 and Bluetooth 4.0 or above
Search “Lufitcode” in the APP store or Scan QR code in the user manual
1. Permission Setting:
①Allow APP use Bluetooth to access
①Allow APP to use your location–always use in-app
①Allow “Lufitcode” send notifications
①Agree APP Privacy and User Agreement
2. Bluetooth Pair Request:
Turn on Bluetooth and Click “Call pairing”
3. Network Access
①Allow “Lufitcode” uses network access, so you can get Weather updates on your
watch.
Bluetooth Calling Settings
①Turn on watch—Calling pairing
①Smartphone settings—Bluetooth settings—Search “Call Watch”— Connect (Watch
shows “Pair Successful”)
①App—Device (watch icon)—Frequent contacts—Add + contacts, synchronous data
with watch
①You can see contacts in your watch and make or answer calls from the watch.
Important:
1. The maximum Bluetooth distance between watch and device is 8-10meters. If
the watch is beyond the distance, may cause disconnection.
2. NOT set app background keep running permission may cause disconnect or
resetting.
3. NOT installing the newest APP version may cause sleep monitor/weather data
missing.
Hey, Please feel free to contact us if any issues with the operation. We will
reply within 24hours.
Thank you.