SJCOM M50 Hunting Camera User Manual

SJCOM M50 Hunting Camera User Manual

Please take time to read this user manual before using this camera first time. Caution!!

1.  This is a high-precision product. Do not drop.
2. Do not expose the unit to strong magnetic fields, such as electric motors, magnets and machinery that use strong radio waves.
3. Never leave the unit in high-temperature areas. Electronics and optics can be damaged under prolonged exposure to heat.
4. Please choose a regular brand TF card. The normal use of an informal brand card cannot be guaranteed.
5. Do not bring the TF card close to objects with strong magnetic fields to avoid losing the data stored in the card.
6. This product can use dry batteries or rechargeable batteries. Please confirm the positive and negative poles of the battery. Do not disassemble or burn the battery. Do not mix with old batteries or different types of batteries to avoid battery leakage or explosion.
7. Please place this product in a cool, dry and dust-free place.

Please choose an official collection point to recycle this product or its battery, and do not dispose of it in the trash.

Product brief Introduction

1. Lanyard hole
2. Key Hole
3. 1/4 nut
4. Locking machine buckle
5. Power supply port
6. Infrared light
7. Photosensitive
8. Microphone
9. LED Indicator
10. webcam
11. (main)sensor
12. (Sub) sensor
13. Screen
14. Photo Button
15. Video Button
16. Up button
17. left button
18. Ok button
19. Right button
20. Down button
21. Menu button
22. Replay button
23. Speaker
24. Toggle Switches (OFF/SETUP/ON)
25. TF card socket
26. USB port
27. Battery area

Camera Installation diagram

Fix the camera to the with a strap

Diagram of camera sensing angle

• The camera sensing is 50°

Diagram of camera sensing distance

Package List

• Hunting camera X1
  

• Strap X1
  

• Holder X1
  

• Expansion screw X1
  

• Remote control X1

• USB charging cable X1
  

• User manual X1

Main Chip

• NT96658 Sensor : GC4653
• Lens Angle : 60°
• Aperture : 1.6
• Pixel : 24M
• Screen : 2.33 inches
• Wifi : 2.4GHz
• Remote control : Yes
• Infrared light : 38 pcs
• PIR sensing angle : 55°
• Heat sensitivity distance : 12M
• Coded format : H.264
• Video format : MP4
• Photo format : JPG
• Video resolution :
  • 1296P (1728’1296) 30FPS
  • 1080P (1920’1080) 30FPS
  • 720P (1280’720) 30FPS
  • 480P (848’480) 30FPS
  • 360P (640’360) 30FPS
• Photo resolution :
  • 24M (6544*3680)
  • 20M (5888*3312)
  • 16M (5376’3024)
  • 12M (4608*2592)
  • 8M (3840*2160)
  • 5M (2960*1664)
  • 3M (2400’1344)
  • 2M (1920*1088)
• Language :  English/French/Spanish/Portuguese/ German/Italian/Simplified Chinese/ Traditional Chinese/Russian/Japanese
• Microphone : Built-in
• Speaker : Built-in
• USB port : TYPE_C
• Waterproof : IP65
• Dimension :  1349674mm
• Battery : AA battery 8 pcs
• Working temperature : -10°C-50°C
• Storage : Plug-in type TF card above Class 10 supports up to 128GB

Switch manual

Note: You need to manually set the toggle switch when the camera needs to enter automatic work after setting Toggle to the ON position, the camera can enter the automatic working state. If the camera swing switch In the SETUP gear, it cannot enter the automatic working state.

The Instructions of Remote Control

Application download

Scan the following QR code to the install the “Catch Cam” app

WiFi

Camera with turn on/off

Move the toggle switch to the SETUP position. After the camera is turned on, press the up button once and the WIFI will be turned on. After WIFI is turned on, the WIFI name and WIFI password will be displayed on the camera screen. The phone can be based on the camera WIFI name and WIFI password displayed on the screen to connect the camera WIFI. To turn off WIFI, press the up button again and WIFI will turn off.

Remote control to turn on/off  WIFI

When the camera swing switch is in the SETUP gear or the ON gear, the remote control can be used to quickly turn on the WIFI. Press the ON button on the remote control to turn on the WIFI. If you need to turn off the WIFI, press the OFF button on the remote control and the camera WIFI will be shut down.

Note: After the WIFI is turned on, the WIFI name and WIFI password will be displayed on the camera screen.
WIFI name: M50-XXXXXXXXXXXX
WIFI initial password: 12345678

User Manual

Automatically photo

The camera toggle switch is manually moved to the ON position. When an animal passes by the front of the camera, the camera will automatically take a snapshot

Automatic recording

The camera toggle switch is manually moved to the SETUP position, after the camera is turned on, press the MENU button, the camera can enter the general setting interface. Select the shooting mode by pressing the down button or up button, and press the OK button to enter the shooting mode setting, and then press the down button to select the recording menu, and then press the OK button to confirm. After confirming the menu, press the MENU button to exit the menu setting, and then turn the toggle switch to the ON position.

After completing the above settings, when an animal passes by the front of the camera, the camera will automatically record.

Automatic photo + video function

The camera toggle switch is manually moved to the SETUP position, after the camera is turned on, press the MENU button again, the camera enters the general setting interface. Select the shooting mode by pressing the down key or up key, press the OK key to enter the photo + video setting, and then the down key to select the photo + video menu, and press the OK key to confirm. After confirming the menu, press the MENU button to exit the menu setting, and then manually turn the toggle switch to the ON position

After completing the above setting operations, when an animal passes by the front of the camera, the camera will automatically photo + video.

Manually take photos

The camera toggle switch is manually moved to the SETUP position (as the picture shows 1), after the camera is turned on, press the camera button (as the picture shows 2) to enter the camera preview interface, press the camera button again and the camera will take a photo.

Manually recording

The camera toggle switch is manually moved to the SETUP position (as the picture shows 1), after the camera is turned on, press the record button (as the picture shows 3) to enter the video preview interface; press the record button again and the camera will start recording.

Manually recording

Move the toggle switch to the SETUP position (as the picture shows 1), after the camera is turned on, press the MENU button again (as the picture shows 4), the camera enters the general setting interface Select the menu to be set by pressing the down button or up button, and press the OK button to enter the setting and confirm the setting. After the setting is completed, press the MENU button to exit.

General settings menu

• mode: Photo / Video / Photo + Video
• PIR interval: 00 minutes 05 seconds – 59 minutes 59 seconds
• Side PIR settings: Off / on
• PIR sensitivity: High/Medium/Low
• Time-lapse shooting: OSS-23H59M59S
• IR LED: Automatic/best/economy
• Monitoring period: Off / on

Photo settings

Move the toggle switch to the SETUP position (as the picture shows 1), after the camera is turned on, press the MENU button again (as the picture shows 4), and switch to the photo setting interface by pressing the left or right button. Select the menu to be set by pressing the down button or up button, and press the OK button to enter the setting to confirm the setting. After the setting is completed, press the MENU button to exit.

Photo setting menu

• Photo resolution: 24M / 20M / 16M / 12M / 8M / SM / 3M / 2M
• Number ofshots: 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / TO sheets
• Shutter speed: 1 / 15, 1 / 20, 1 / 30

Recording settings

Move the toggle switch to the SETUP position (as the picture shows 1), press the MENU button (as the picture shows 4) after the camera is turned on, and switch to the recording setting interface by pressing the left or right button. Select the menu to be s et by pressing the down button or up button, and press the OK button to enter the setting to confirm the setting. After the setting is completed, press the MENU button to exit.

Recording setting menu

• Recording resolution: 1296P / 1080P / 720P / 480P /
• Recording time: 5 -180 seconds
• Recording audio: Off / on

System settings

Move the toggle switch to the SETUP position (as picture shows 1), press the MENU button (as the picture show 4) after the camera is turned on, and switch to the system setting interface by pressing the left or right button.Select the menu to be set by pressing the down button or up button, and press the OK button to enter the setting and confirm the setting. After the setting is completed, press the MENU button to exit.

System setting menu

• Language settings: English / French / Spanish / Portuguese / German /ItaIian cancel/confirm.
• Default setting: cancel / confirm
• Format:  cancel / confirm
• Date/Time: W / MM / DD, MM / DD / W, DD / MM / W
• Time format: 12H / 24H
• Date label: Off / on
• Button sound:  Off / on
• Camera name: A-Z, a-z, 0-9 (support capital letters A-Z, small letters a-z, numbers 0-9
• Password setting: Off / on (support small letters a-z, numbers 0-9)
• Remote control: Off I on
• WIFI name: Off / on (support capital letters A-Z, small letters a-z, numbers 0-9)

Playback

Move the toggle switch to the SETUP position (as the picture shows 1), and press the REPLAY button (as the picture shows 5) after the camera is turned on. After entering the playback interface, you can scroll through the up or down button to view files. View the video file by pressing the OK button to play and stop playing. After viewing the file, press the REPLAY button to exit the playback function

FAQ

1. The camera cannot be turned on.
   It may be that the battery is dead. Replace with a new battery.

2. The camera cannot automatically take photos/videos
   Check whether the toggle switch is in the ON position. The toggle switch needs to be in the ON position for the camera to take pictures/videos automatically.

3. How many states does the camera indicator have?
   The red indicator light flashes: the sub-sensor has sensed an object.
   The blue indicator light flashes: the main sensor senses an object.
   Pink indicator light flashes: themain/sub sensor detects an objecC

4. The screen displays “PIR:0-1” and “PIR:1.-1.”?
   PIR: 0-1 Thesub- sensor senses an object.
   PIR: 1-1 Themain/sub-sensor senses an object.

Product features may change with product upgrades or updates, please refer to the actual product specifications

If you need after-sales service, please contact SJCAM customer service

Customer Support

Technical support email: support@sjcam.com

Welcome to SJCAM after-sales service web page WWW.SJCAM.CN Manufacturer: Shenzhen Zhencheng Technology Co., Ltd.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>