purity UU000075 True Wireless Earbuds User Guide
- June 6, 2024
- purity
Table of Contents
purity UU000075 True Wireless Earbuds User Guide
STEPS FOR WEARING THE EARBUDS
-
STEP 1: Place the Purity Earbud inside your ear.
-
STEP 2: Then, rotate Earbud, back and away, to find a snug and comfortable fit. (Earbud fitting varies due to ear size).
EXAMPLES OF IMPROPER FIT
Do Not Rotate Earbuds Fully Horizontal (doing so WILL cause Earbuds to fall out).
Pairing
-
Take out both Earbuds. To pair Earbuds, go to Settings, then Bluetooth, and select “Purity One”.
-
Purity Earbuds are now paired successfully.
Using The Multi-Function Button
- SINGLE PRESS
Music-Play/pause
-
DOUBLE PRESS (LEFT/RIGHT)
Left for Previous/Right for Next -
SINGLE PRESS
Calls-Answer/End Calls or Switch Between Calls
-
SINGLE PRESS
Calls-Press and Hold For 1 Second Will Reject Call
-
ACTIVATE VOICE ASSISTANCE (SIRI, GOOGLE ASSISTANT)
Tap the MFB 3 times
Factory Reset
Follow the 2-Step Process to perform a Factory Reset.
IMPORTANT: You MUST turn OFF the earbuds first, before you RESET them. The Factory Reset is a 2-Step Process.
-
Step 1: TURN OFF
Action: Hold MFB buttons for 3-4 seconds.
Result: (LED Lights will blink signalling the earbuds are OFF). -
Step 2: RESET
Action: Hold MFB buttons for 10-15 seconds.
Result: (LED Lights will turn on, blink, then eventually stop).
COMPLETE
Earbuds are now RESET and enter OFF state.
IMPORTANT: Please remember to DELETE your previous pairing history BEFORE you perform a Factory Reset. The Factory Reset DOES NOT remove pairing history
FAQ
Q: What if I cannot find “Purity One” in the Bluetooth Page?
-
Reason 1: Earbuds are paired to another device.
-
Solution: Turn OFF Bluetooth on the mistaken devices to disconnect the Earbuds. Then, pair to your preferred device.
-
Reason 2: Earbuds reached 0% battery life.
-
Solution: Place both Earbuds into Charging Case and close it. Then, charge Earbuds for 5 mins.
If Charging Case has low battery, use Micro USB Cable to charge it as well. -
Reason 3: Earbuds are OFF.
-
Solution: Press and hold MFB’s for 3-4 secs. to turn ON the Earbuds.
Q: Why won’t the Left and Right Earbud sync? Why is sound only emitting
from one Earbud?
What if there are 2 “Purity One” choices on the Bluetooth page?
Solution: Complete the following process: Turn OFF Earbuds (hold MFB’s for 3-4 secs.). Turn ON Earbuds (hold MFB’s for 5 secs.). Voice prompt will say “Pairing”. White & Red LED Lights will flash slowly. Double tap MFB’s (both L/R). LED Lights will flash faster. Once LED Lights flashing slows, the synching process is complete.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>