nohro Wireless APS Earbuds User Manual
- June 6, 2024
- Nohro
Table of Contents
WIRELESS EARPHONES
A set of TWS wireless earphones. The left and right earphones have full Bluetooth functionality, so you can use them together or separately.
Connect:
Make sure the earphones are powered on. To activate, remove the headphones
from the charger box. They will flash alternately blue and red to indicate that
they are active and searching for devices. On your device, find “TWS4” in the
list of available devices and connect.
Once connected, the earphones will stop flashing and a tone will sound in the
headphones.
Please note that the earphones are only active when removed from the charger
box. When they are in the charger box, they automatically go into standby mode
and will turn on automatically when removed from the charger box.
Features:
When the earphones are in the charger box, you can press the button in the box
to view the battery level.
Double-tap to recall the latest incoming/outgoing number. Press once to
receive calls or start/pause the music.
Press the earphones for 3 seconds to turn them off.
Press again to turn on the earphones again.
Call:
To receive a call when the earphones are connected to a smartphone, press either the right or left earphones once. Press either right or left earphones once to end the call. When playing music, you can double-tap either the right or left earphones to dial the last incoming/outgoing call.
Charging:
Insert the supplied USB-A to Micro USB connector into the charger box and into
a USB connector on a computer or wall charger. Make sure both earphones are
placed correctly in the charger box. The four LEDs on the front of the charger
box will light up to indicate the power level. When all four LEDs light up,
the charger box is fully charged. During charging, the headphones will light
red to indicate charging. When fully charged, the light will change to blue.
The headphones must be in the charger box to charge.
On the go, you can use the charger box as extra power for your headphones. The
charger box can give you 10 hours of extra battery life. Plug the headphones
into the charger box and it can fully charge your headphones up to 2 times
extra.
Specifications:
| Bluetooth version: | 5.0 |
|---|---|
| Range: | Up to 10 m |
| Battery headphones: | 50 mAh |
| Battery charger box: | 450 mAh |
| Standby time: | Up to 60 hours |
| Playtime: | Up to 5 hours |
Up to 15 hours with the charger box
Charging time:| Up to 1 hour
Power:| USB 5 V
Charging cable included:| 26 cm
Sensitivity:| 97 dB ± 3 dB
Sweat and water repellent
Frequently asked questions:
Sound is unstable: Make sure the headphones are within range of the device
they are connected to. Disconnect the headphones and reconnect. Make sure the
headphones are powered. Do not stand next to WiFi and the like, as it may
affect the signal.
I can’t find the headphones in the list of available products:
Make sure the headphones are powered. Optionally, put them in the charger box.
NOTE! Do not let the product get wet. Do not expose the product to
extreme heat or open flames.
In case of problems or questions about the product, please contact the
importer at:
info@nohro.dk
or
+45 6913 2121.
Documents / Resources
|
nohro Wireless APS
Earbuds
[pdf] User Manual
Wireless APS Earbuds, Earbuds
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>