Nohro Wireless Charger User Manual
- June 6, 2024
- Nohro
Table of Contents
Nohro Wireless Charger User Manual
Please read this user manual carefully before use and keep for future reference.
Product Overview
Wireless charging standard
Not all devices are compatible with Qi charging standard. This device is compatible with all devices that are compatible with Qi wireless charging standard. Your device might need an external wireless charging receiver (not included) to work with this wireless charger
Technology
Assembly Instruction
-
Rotate the screw cap to release the holder.
-
Input: Connect the wireless charger and a USB port with the included USB-C wire. To use the fast charging feature, the output of your USB port must support up to 9 V – 1.2 A.
-
Press the button on the clip to fix the holder in the airduct. Attach the holder and a adjust for best viewing angle. Then tighten screw cap.
-
Place your smartphone in the holder. The locking mechanism will automatically open when infrared sensor is activated. When the smartphone is placed in the holder, the locking mechanism will automatically close to grip the smartphone.
-
To remove the smartphone, press the button on the side of the holder, the locking mechanism unclamps the smartphones
-
LED light. indicating status:
-
Blue light indicating proper working order.
-
Red lights indicating that the charger is not in working order.
Attention
- Please keep the charger away from water and other liquids.
- If you need to clean the charger, please make sure it is not connected to a power supply.
- Operation temperature: 20 – 45° C.
Charging failure, LED light flashing
The following situations may cause charging failures or high temperature.
- The USB port does not meet the requirements.
- The charging cable is not in working order.
- The smartphone cover is to thick (recommended cover thickness max to 2 mm).
- The phone is not placed at the middle of the wireless charger.
- There is metal or magnet on the back of the smartphone or cover.
- The smartphone does not support Qi wireless charging.
Product specifications
Fast charging wireless charger.
- Input: 5 V- 2 A / 9 V- 1.67A
- Output: 5 V – 1.5 A / 9 V – 1.2 A
- Charging Efficiency: 75 %
Email: info@nohro.dk
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>