JG MAKER Non-contact K3 Wall Mounted Infrared Temperature Measurement Forehead Thermometer User Guide

June 6, 2024
JG MAKER

Infrared Thermometer User Guide

JG MAKER Non-contact K3 Wall Mounted Infrared Temperature Measurement
Forehead Thermometer - logo Model: K3

Introduction

JG MAKER Non-contact K3 Wall Mounted Infrared Temperature Measurement
Forehead Thermometer - figure 1

Specification

  1. Accuracy: ±0.2 degrees
  2. Abnormal automatic alarm: flashing +“Di Di” sound
  3. Automatic measurement: measuring distance 5cm ~ 10cm
  4. Screen: Digital display
  5. Charging method: USB charging or battery(18650 Li-ion).
  6. Install method: nail hook, double-sided adhesive sticking, bracket fixing
  7. Environment temperature: 10℃~40 ℃(Recommended 15℃~35℃)
  8. Infrared measuring range: 0~50℃
  9. Response time: 0.5s
  10. Input: DC 4.2-5V
  11. Weight: 350g
  12. Dimensions: 170115140mm
  13. Standby: About one week

Status Description

  1. Standby: The red dot in the bottom of the display lights up in turn. (Fig. 1)

  2. Insufficient power: The horizontal bar lights up in the middle of the display. (Fig. 2)

  3. Normal temperature: Flashing green lights and alarm ‘Di’. (Fig. 3)
    JG MAKER Non-contact K3 Wall Mounted Infrared Temperature Measurement
Forehead Thermometer - figure 2

  4. Abnormal temperature: Flashing red lights and alarm ‘Di Di’.(Fig. 4)

  5. Default:
    ‘Lo’: Ultra-low temperature alarm. (Fig.5)
    ‘HI’ : Ultra-high temperature alarm.(Fig. 6)
    JG MAKER Non-contact K3 Wall Mounted Infrared Temperature Measurement
Forehead Thermometer - figure 3

Operation Instruction

  1. Temperature measurement: Front of the thermometer and approach it within 5-10 cm. (Fig. 7)
    JG MAKER Non-contact K3 Wall Mounted Infrared Temperature Measurement
Forehead Thermometer - figure 4

  2. Mode switching: There is a small hole on the back of the device (Fig. 8). You can use a 3mm diameter screwdriver to insert the hole and then press the button.
    (1) Temperature unit: Press ‘mode switch hole’ then select ‘C’ or ‘F’ (Fig.9,

  1. C: Celsius F: Fahrenheit
    (2) Mode: Long press 3 seconds and select ‘b’ (Fig 11, 12)
    JG MAKER Non-contact K3 Wall Mounted Infrared Temperature Measurement
Forehead Thermometer - figure 5
  1. Install and replace the battery
    (1)Tear off the sticker on the back, remove three screws(2)Open the back base and install 18650 Li battery.
    JG MAKER Non-contact K3 Wall Mounted Infrared Temperature Measurement
Forehead Thermometer - figure 6

  2. Install method
    JG MAKER Non-contact K3 Wall Mounted Infrared Temperature Measurement
Forehead Thermometer - figure 7

JG MAKER Non-contact K3 Wall Mounted Infrared Temperature Measurement
Forehead Thermometer - warning Made in China

Documents / Resources

| JG MAKER Non-contact K3 Wall Mounted Infrared Temperature Measurement Forehead Thermometer [pdf] User Guide
Non-contact K3 Wall Mounted Infrared Temperature Measurement Forehead Thermometer, K3, Infrared Thermometer, Thermometer
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals