Reverie R600/R650 Signal Frequency/Non-Bluetooth Remote Instructions
- June 6, 2024
- Reverie
Table of Contents
Pairing a Remote to a Power Base
(Signal Frequency/Non-Bluetooth)
NOTE: The power base is paired to its remote upon delivery. If for some reason you should need to pair the two, follow these instructions.
Step 1
Place batteries into a remote control (3 x AAA batteries)
Step 2
Check that the power base is plugged into a functioning outlet.
Step 3
Press the learn button underneath the base (on the control box) for 3 seconds.
Step 4
When the button illuminates to green on the control box the radio frequency
code setting function will be activated.
Step 5
Press any button on the remote control.
Step 6
When the receiver light flashes, you have completed the learning process of
the radio frequency code.
NOTE: To join another power base to the same remote, repeat steps 1-6 with the other power base.
CUSTOMER SERVICE:
800-973-8374
[email protected]