Thermometers TMT3 Hands Free Body Infrared Thermometer User Manual
- June 6, 2024
- Thermometers
Table of Contents
Infrared Thermometer User Manual
Specification
- Accuracy: ±0.2 degrees
- Abnormal automatic alarm: flashing +”Di Dr sound
- Automatic measurement: measuring distance 5cm 10cm
- Screen: Digital display
- Charging method:USB charging or battery(18650 Li-ion)
- Install method: nail hook, double-sided adhesive sticking, bracket fixing
- Environment temperature: urc-or (Recommended 1st-3st )
- Infrared measuring range: 0-50t
- Response time: 0.5s
- Input: DC2-5V
- Weight: 350g
- Dimensions: 170115140mm
- About one week
Introduction
Content
Status Description
Standby: The red dot in the bottom of the display lights up in turn.|
---|---
Insufficient power: The horizontal bar lights up in the middle of the
display.|
Normal temperature: Flashing green lights and alarm’ Di’.|
Abnormal temperature: Flashing red lights and alarm ‘Di Di’.|
Lo’: Ultra-low temperature alarm.|
‘HI’: Ultra-high temperature alarm.| 
Operation Before Measurements
-
Power on
For first-time use, open the case with a screwdriver, pull out the battery strip, put the battery inside the battery compartment. Press the [ power switch] button to turn on the thermometer, then initialize the system.
LCD will show the default value: 00.0 °C.
-
Measurement unit selection Press [switch button] once by using a 3mm diameter screwdriver to select the measurement unit °C or °F (C: Celsius F: Fahrenheit)
-
Select Measuring Mode
Long press the mode switch button for 3 seconds to switch the temperature mode. The default mode is body mode. Sur: surface mode, bod: object mode, Cou: counting mode ). The “bod” mode is programmed by default.
Measurement
Make sure the measuring distance is between 5-10 cm (1.97-3.94 in) when measuring.
Installation Methods
Documents / Resources
|
Thermometers TMT3 Hands Free Body Infrared
Thermometer
[pdf] User Manual
TMT3, Hands Free Body Infrared Thermometer, Infrared Thermometer
---|---