J BURROWS JBIPAD7KBF iPad 10.2 Inch Keyboard Folio Instruction Manual
- June 6, 2024
- J.burrows
Table of Contents
iPad (7th & 8th Gen) 10.2″
Keyboard Folio
Model No. JBIPAD7KBF
Instruction Manual
Product Overview
1. Protective case
2. Pencil holder
3. Keyboard
4. Caps lock indicator
5. Power indicator
6. Charging indicator| 7. Bluetooth indicator
8. Kickstand
9. Keyboard power switch
10. Micro USB charging port
11. Micro USB charging cable
---|---
Operation
-
Tilt-up the back cover from the corner of the iPad case.
-
Lift the centre support.
-
Fold the top portion of the back cover until the magnetic centre support is attached firmly to form a kickstand.
Installation
- Install the Pad into the Fad protective case by aligning the back camera of the Pad with the camera opening on the case and ensure all edges of iPad are well wrapped by the case and secured.
- Make sure the Fad is turned on, and the Bluetooth Keyboard switches the power switch to the ON position.
- For first initial use (new pairing), press the “Fn” key and the letter “C” key on the bluetooth keyboard together to activate the pairing process.
- Go to “Settings” of iPad and turn on Bluetooth function, then tap on “JBIPAD7KBF” on the available list to start pairing.
- Type the auto-generated 4 digit code that will show on the iPad screen using the keyboard numbers then press the “enter” key. If pairing is unsuccessful please repeat steps 3 to 5.
- Once “Connected” is shown next to keyboard name on the iPad screen, pairing is successful and keyboard is ready for use.
- To reconnect to previously paired device, simply turn on the keyboard and Bluetooth function on the iPad. Keyboard will automatically search for the last paired device once it is turned on
- To connect with a new device, please disconnect the keyboard from the previously connected device before initializing pairing again.
Keyboard Function Introduction
Indicator Lights
Caps lock indicator| Indicator on means uppercase input,
Indicator off means lowercase input.
---|---
Power indicator| Indicator flashes red when power is low. (Charging is
needed.)
Charging indicator| Indicator is solid orange while charging,
The indicator turns green when the keyboard is fully charged.
Bluetooth Indicator| The indicator flashes blue when pairing,
The indicator turns off when pairing is successfully done.
Fn Combination Function Keys
1. Display iPad home screen
2. Decrease display brightness
3. Increase display brightness
4. Search
5. Virtual keyboard
6. Change the input method
7. Previous track| 8. Play/Pause
9. Next track
10. Mute
11. Decrease volume
12. Increase volume
13. Delete
14. Lock screen
---|---
Troubleshooting
-
The power indicator light does not light up when the power switch has been turned on
Your keyboard has no battery power. Please charge your keyboard by connecting the micro USB charging cable with a working USB power source to the keyboard. -
iPad is unable to find the keyboard on the Bluetooth search screen
Check the keyboard to ensure that the power has been turned on and the Bluetooth function on the iPad is turned on. Press the “Fn” key and the letter “C” key on the Bluetooth keyboard together to activate the pairing process once again. -
Seeing the keyboard listed after searching Bluetooth devices, but the connection failed.
Switch OFF the keyboard power switch. Then in the Bluetooth settings on the iPad, select “JBIPAD7KBF” from the “Devices” list, tap the “i” icon to either “Disconnect” or “Forget This Device”. Then follow instructions in steps 2 to 5 to pair the Bluetooth keyboard to the iPad.
Please Note: Bluetooth keyboard will enter the standby mode to conserve batten/ power after 10 minutes of idling, press any key to awaken the keyboard.
Maintenance
- Do not place a heavy object on the keyboard.
- Do not disassemble the keyboard.
- Do not apply any type of liquid directly on the keyboard.
- Keep the keyboard away from direct sunlight.
- Use a soft damp cloth with water or an alcohol-based disinfectant to clean the keys.
- Turn off the power of the keyboard when it is not used for an extended period of time.
- If the keyboard is not used for extended periods, it is recommended to charge the keyboard every two months.
Specification
Bluetooth version: | 3.0 |
---|---|
Working time: | 60 hrs |
Standby time: | 200 hrs |
Cover range: | up to 10m |
Battery type: | Lithium polymer |
Battery capacity: | 180mAh |
Input power: | 5V 2.0A Max |
Charging port: | Micro USB receptacle |
Unit dimension (when flat): | 253 x 189 x 20 mm |
Unit weight: | 420g |
Package Contents
- iPad (7th & 8th Gen) 10.2″ keyboard folio x 1
- USB charging cable x 1
- Instruction manual x 1
- Quick-start guide x 1
Product Warranty
* Valid for Australian customers only
Officeworks Ltd warrants that this product will be free from defects and
work as intended for 8 years from the date of purchase by the original
customer.
If the product has any defects or does not work as specified during the
Warranty Period, Officeworks will, at its election and at its expense, repair
or replace the product.
This warranty does not apply:
- to cosmetic damage;
- to damage caused by consumables used in connection with the product (such as batteries);
- where the product has not been used in accordance with all provided instructions;
- to damage arising from fair wear and tear;
- where the product has not been subject to reasonable use;
- where the product has been intentionally or negligently damaged; and/or
- if the customer has attempted to repair the product.
To make a claim under this warranty, please return your product with your
receipt or proof of purchase to your nearest Officeworks store or contact 1300
633 423.
This warranty is provided in addition to any rights you may be entitled to
under the Competition & Consumer Act 2010. Our goods come with guarantees that
cannot be excluded under the Australian Consumer Law. You are entitled to a
replacement or refund for a major failure and compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Apple Pencil and iPad are not included.
Apple Pencil & iPad are trademarks of Apple Inc., registered in the U.S. and
other countries.
The Bluetooth° word mark and logos are registered trademarks owned by
Bluetooth
SIG, Inc. and any use of such marks by Officeworks Ltd. is under license.
OFFICEWORKS LTD
236-262 EAST BOUNDARY ROAD
EAST BENTLEIGH VIC 3165 AUSTRALIA
MADE IN CHINA
Documents / Resources
| J
BURROWS JBIPAD7KBF iPad 10.2 Inch Keyboard
Folio
[pdf] Instruction Manual
JBIPAD7KBF, iPad 10.2 Inch Keyboard Folio
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>