IMOU Floodlight Cam User Manual
- June 6, 2024
- imou
Table of Contents
IMOU Floodlight Cam User Manual
Welcome
Thank you for choosing IMOU.
We are devoted to providing you easy smart home products.
If you have problems using the product, please contact our service team before
returning your product.
Our service mail:
service.global@imoulife.com Frequently
asked questions can be found at
imoulife.com/support/help
Package content
-
Floodlight Camera ×1
-
Mounting Plate×1
-
Screw Package ×1
-
Wire Nut ×3
-
Quick Start Guide ×1
-
Bracket Screws ×4
-
Hook ×1
-
Mounting Screws ×1
Assembly
Application
When mounted at 3 m (10 feet) off the ground, with the PIR lens parallel to
the ground, the motion detector is optimized to detect human-sized objects at
up to 10 m (33 feet).
Camera Introduction
Note: Press and hold the reset button for 10 s to reset the camera.
The pattern of the LED indicator is included in the following table.
LED Status
| Device Status
---|---
Of
|
- Powered off/LED turned off
- Rebooting after reset
Red light on
|
- Booting
- Device malfunction
Green light flashing
|
- Waiting for network
- Sensor pairing mode
Green light on
|
- Operating properly
Red light flashing
|
- Network connection failed
- Failed pairing sensor
Green and red light flashing alternately|
- Firmware updating
Troubleshooting
| Problem | Solution |
|---|---|
| Cannot set up camera |
- Ensure your mobile device and the camera are within range of your Wi-H router.
- Ensure the LED indicator on the camera is flashing green before beginning setup.
The APP says ‘Failed to configure device network’|
- Reset your Camera and connect it again.
- Some cameras only support 2.4GHz, while some routers have dual band, 2.4G/SG. Make sure you are connecting 2AGHz only.
The app says ‘Failed to bind’| The camera is already connected to VVi- Fi, but the router is:
- Not connected to Internet
- Poor network status
- The VVi-Fi signal is not stable due to obstacles or electronic interference
No picture / signal|
- Ensure the LED indicator on the camera is flashing steady green. See ‘LED Status’ section for details if otherwise.
- Ensure the camera is properly connected to power using the included USB power adapter.
- Try repositioning the camera, router, or both to improve signal strength.
Picture is not clear|
- Check the camera lens for dirt, dust, spider webs. Clean the lens with a soft, clean cloth.
- Remove the vinyl cover on the camera lens.
No audio|
- Ensure audio function on camera is turned on.
- Ensure audio is turned up on viewing device.
Phone is not reading QR code|
- Clean the camera lens of your Smartphone
- Ensure that there is enough light on the QR code
- Don’t hold the OR code too close to the camera
@imouglobal
service.global@imoulife.com
http://www.imoulife.com/
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>