sunwaytek H510 Wireless Mechanical Gaming Controller User Manual
- June 6, 2024
- sunwaytek
Table of Contents
WIRELESS CONTROLLER H510/H511
USER MANUAL
Please visit sunwaytek.com for updates and support.
Scan to view video guides on YouTube.
https://www.youtube.com/channel/UCwHvc-IoES6-glPEsVmUgIA
Quick Start
Platform Compatibility
- Including Linux and Raspberry Pi.
- Starting with iOS 13, iPadOS 13, tvOS 13. No requirements on Mac OS.
- Currently unavailable for TV.
- Switch Pro Controller mode only.
Keymapping Profiles
ABXY caps are removable for reposition.
Pair & Link
Pair refers to the first time sync with the device. If wirelessly paired with
another device thereafter, the stored info of the 1st device will be erased,
new pairing has to be done when back to the 1st device.
Link refers to the reconnection to an ever-paired device, whose device info
has been stored in the controller automatically.
- Pair methods listed here are typical of each platform. Read the following guides for more options.
- Fire devices may support all 4 pairing methods
| WIRELESS| WIRED
---|---|---
| Operation|
|
Pair’| Press and hold for 2 sec| Plug-in via USB
Link| Press and hold for 1 sec
Disconnect| Option 1 – Force Sleep: press and hold Home button for 5
sec. Option 2 – Auto Sleep: leave the controller without operation in 5 min.
Option 3 – Passive Sleep: Disconnect from the connected device side.| Unplug
Charge the battery
Charge via type C USB cable on DC power supplies (output Voltage 5V, current ≥
250mA), including but not limited to:
- AC adapter
- Switch dock
- USB port of the computer
- others with USB electricity output, like power bank, etc.
The controller supports playing during charging. The 4 LED lights stay lit once full charged.
WARNING: Battery Safety
Do not connect to high voltage outlets.
Use only approved charger and cord.
Periodical charging is necessary when unused for a long.
Remove the battery if they are worn out and dispose of them properly.
Connect to Switch
1-1 From the HOME screen, select “Controllers”, then “Chang Grip/Order”,
enter the pairing screen, stay here.
Operate by Joy-con, touch, or a paired controller. ****Ignore the instruction
on the last screen.
- Up to 8 controllers can be paired at the same time to a Nintendo Switch system.
Connect to PC
Option 1: Bluetooth (Xinput)
Option 2: Bluetooth (Switch Pro Controller)
Option 3: USB (Xbox 360 Controller)
Connect to Android
Option 1: Android Gamepad
Option 2: Switch Pro Controller
Pairing method for Switch (see Connect to Switch) also applies to Android.
The controller will be paired as Switch Pro Controller, working in supported
games.
Connect to Linux
Option 1 also applies to Linux or Raspberry Pi, as long as the device has Bluetooth enabled.
Connect to Fire TV
Amazon Fire OS devices support Nintendo Switch Pro controller, Xbox 360 Controller, Xbox One Controller and Android Gamepad, so all the previously introduced 4 pairing methods may be applicable
Connect to iOS/iPad OS
Connect to Mac
Nintendo Switch mode + B also applies. Recognized as device name “Pro Controller”. Work as “Nintendo Switch Pro Controller” in Steam, support motion control.
Ver. 1.13
Contents in these documents may change without notice.
The names of actual companies and products mentioned herein may be the
trademarks of their respective owners.
© 2020 Sunwaytek Limited. All rights reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>