foxin AMAZE Fitness Smart Watch User Manual
- June 6, 2024
- foxin
Table of Contents
FOXFIT AMAZE
| |
---|---|---
|
|
**Fitness Smart Watch
QR Code for YFit
App Download:
http://www.decadesmart.com/yfit/download.html
**
USER MANUAL
www.foxin.in
Follow Us On : /foxinindia
APP Downloading:
Scan the QR code to install the [Yfit] APP.
http://www.decadesmart.com/yfit/download.html
- Compatible with iOS 9.0 & Android 5.0 or above.
- if software is not the latest Version, YFit APP may not work properly.
Update software for Watch: App[YFit]_-[Device]—-[Firmware upgrade]—-[upgrades] Update software for APP: App[YFit][Profile].[update] Note: [Pad or Tablet is not supported.
Watch & APP Connecting:
- Turn on your phone’s Bluetooth and GPS. Make sure the watch is not connected to any other devices.
- [YFit APP]→[Device]→[Add Device]→ Tap on the watch name to pair it.
Charging:
-
Before you use the watch for the first time, please charge it to ensure that the watch has sufficient power.
-
Reusing the watch after a long period, please charge the watch at least 2 hours to activate the battery. But don’t overcharge it every time when charging the watch, which will shorten the battery working life.
-
Making sure that the watch will be charged every 2 months when you don’t use it.
-
If 5% of battery capacity left, Watch will switch to the power saving mode automatically.
All functions will be disabled. -
Please use the standard accessories for charging, Please choose a charger with an output voltage/current of 5V/SOOmA or 1A.
-
The two charging thimbles of charging accessories shall not be contact on metal objects under which it is energized, so as to avoid short circuit or fire. Do not use quick charger.
FEATURES
-
Changing Main Watch Face / Dial (2 Ways)
Change Watch Face from Watch
In watch→Find the menu:[Setting] or (More)→ [Watch faces], or find the menu: [Watch faces] to change it directly (some software version Support)
DIY Watch Face or Watch face market from APP
[VFit APP]→[Device]→[Watch faces]→[Edit]or [More]→[Select picture]→OK(Do not leave the download interface until the download is 100% completed) -
Step
The watch will record the number of moving steps, distance and bumed calories. Other fitness activity data will synchronize to the APP. It resets every day after 00:00, and all history records are available in the APP. -
Sleep
It will record the sleep time, the duration of deep sleep and light sleep. You can view more data about sleep records through YFit APP. Default sleep statistics period: 8:00pm-40:00am. -
Sport
Multi-Sport modes (Walk, Run, Cycling, Climb, Yoga, Basketball, Football, Badminton, Skip and Swim). Press the home bufton to pause/stop the exercise mode. Exercise data will be synchronized to YFit APP, you can view the detailed data records in the sports mode in the APP
-
watch doesn’t have GPS, so when using GPS in sport mode, the APP will activate the mobile GPS to record the movement track 5. Heart Rate
Entering the heart rate measuring interface, it will start in 2 seconds and wait for 10-20 seconds to complete the measuring. If you need heart rate measuring automatically, please set in APP. Tip: [YFit APP]→[Device]Open→ [Automatic heart rate detection]. You will have more detailed view and analysis in the APP.
Note: The measuring result is only for reference and cannot be used for medical purpose.-
Breath
Entering the breath training interface, you can choose the time and rhythm. For example, selecting the time of 1 minute and then the rhythm is slow. Click the breathing icon to start breathing training. Breathing training helps to reduce stress and improve vital capacity -
Blood Oxygen
The principle of blood oxygen monitoring is to use the PPG measurement method to measure the oxygen saturation in blood through a light sensor. Put the smart watch on your wrist and start measuring after clicking the blood oxygen interface on the watch. In the APP blood oxygen interface, you can check the historical measuring result. -
News
Whenever there is a new message notification in the smart phone, the watch will vibrate and synchronously show the message content. Watch can save the latest 5 new messages and the latest new message will automatically overwrite the previous saved message, including SMS and other information. -
Weather
You can view the weather today and next two days. You need to connect the watch and YFit APP to get location weather information.
-
-
The weather information displayed on the smart watch obtains from the service provider. So if the service provider of the smart phone is different, the weather information displayed may be different. 10. Shutter (should be connected with APP)
A: In the APP, go to [Device]—-[Easy camera] B: On the watch, from the main interface, swipe from upwards till the “More” menu. Tap on It and then tap on “Shutter”.-
Music control
After connecting with the APP ,Playing music in the smart phone, the watch can control the music -
Find Phone &stop watch
Click to use it -
Setting
Tap on it to use: Watch face, QR code, Screen sleep, Brightness, Power off, Reset, Find phone, Stop watch -
Sedentary Reminder
[YFit]JAPP—[Device]—[Idle alert] Toggle to enable/disable the function. When there are no activities in 1 hour, or if less than a certain number of steps within a given period of time, the smart watch will vibrate to remind you. -
Cali Reminder
[YFitJAPP→[Device]→[Call reminder]. Toggle to enable/disable the watch to remind you the incoming calls of your phone.
Note: The watch cannot be used to answer calls or reply to messages. It can only display messages or reject the incoming call. -
Alarm
[YFit]JAPP→[Device]→[Alarm]. Up to 5 alarms can be set. The alarm will only remind when the time set is more than 2 minutes. -
Wake Screen on Wrist Raising:
Flipping your arm, the screen will automatically light up. -
QR Code:
Scanning the QR Code to download YFit APP.
-
FAQ
APP cannot detect the smart watch and cannot be paired.
- Please confirm the smart phone version firstly. Android needs to be version 5.0 or above; iOS needs to be version 9.0 or above. And confirm that the notification permissions of the smart phone are ail turned on.
- Confirm that the Bluetooth and GPS of the smart phone are all turned on.
- Move your smart phone close to the smart watch and search again.
- If the steps above cannot solve the problem, please set in the smart phone: open the phone settings—app and notifications → permissions → switch all permissions of Yfit to ON → turn on GPS → reset the watch after restarting the phone.
Why can’t the watch receive the messages?
As the Android phone backplatform will automatically clean up the less used software, it will cause the watch to go offline and no longer push messages.
-
Ensure that the YFit APP operating in the phone.
-
Ensure that the applications that needed to be notified by watch are only logged in smart phone. The watch cannot be notified due to that the information has been read by the other device if the application logged in smart phone and computer (or Ipad).
-
Ensure that the notification center of the smart phone software is open(if there is no message displayed in the notification bar of the phone, the message will not be displayed on the watch, If you find some information missed, also need check the drop-down menu of the mobile phone notification centre and whether get the message):
-
Mobilephone Setting:[Smart phone]→[Settings]→[App and notifications]→[Permissions]→[YFit]Set all permissions to be ON.
Special Note: Above iOS 12 system version, [settigs]→[bluetooth]→[my devices]→[device name] tap this: →[share system notifications]→ open it -
APP “permission settings”
First Step (Android Phone):
[YFitJAPP→[Device]→[Background run permissions]→[Click ] Second Step(iOS&Android Phone):
[YFitJAPP→[Device]→[App alerts]→[Message reminding]→[YFit] →[OFF]change to[ON] Note: APPLE mobile only need set the second step
After the smart watch and the smart phone are connected with Bluetooth,
the APP of the phone and the clock are not synchronized and the displaying time is inconsistent.
Please don’t use the phone’s own Bluetooth setting to connect the watch and phone. If connected, delete the watch from the list of paired devices. After that, please follow the steps of “Watch & APP Connecting” to connect the watch and phone.
Question: The number of steps displayed in the APP is inconsistent with
the number of steps of the watch.
Answer: Please confirm the connection status between watch and APP. After connecting with the phone, APP will automatically synchronize the steps of the watch.
Notes
- When measuring heart rate, try to stay still during the measuring for better accuracy. And raise your hand to the same level as your heart
- The watch has the prevention rating of IP68 for dust and water under the following conditions: (1) Water depth of at most 1.5m (2) At most 30 minutes of exposure to water.
- The screen touch of the watch does not support underwater operation. When the watch is wet, wipe the surface with a soft cloth before operating.
- Avoid wearing the watch too tightly on daily use. Keep the skin contact area of the watch dry. If symptoms such as redness or swelling appear on your skin, immediately stop using the watch and consult the doctor.
- Waich isn’t suitable for hot baths, hot springs, saunas, snorkeling, diving, water skiing and other wading or deep-water activities with high-speed water flow.
Balaji Solutions Private Limited
Ecospace Business Park, Plot No. 2F/11, Block – 4B, 9th Floor,
Unit No.902, New Town, Rajarhat, Kolkata – 700 156, W.B, India.
E-mail:
[email protected]
Website: www.foxin.in |
www.balajisolutions.in
FOR ANY SERVICE RELATED QUERIES PLEASE CONTACT OUR
Service Helpline: +91 9038565656 or
Mail us : [email protected]