dyson 330PH01 Pure Humidify + Cool User Manual

Pure Humidify + Cool 330PH01

User Manual

Thank you for choosing to buy a Dyson purifying humidifying fan.

Set up your machine quickly, with step-by-step support

•  Personalize your settings for maximum comfort.
• Control and monitor your machine, wherever you are.
• Automatically update your machine with all the latest software.

Download the Dyson Link app

Download the Dyson Link app from the App store or Google Play.
Open the app and follow the on-screen instructions to create a new account.
For further information and support: dyson.co.uk 0800 298 0298.

Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc., registered in the U.S. and other countries.
Google Play and the Google Play logo are trademarks of Google Inc.

Activating your guarantee

We don’t stop caring about our machines once they’re yours.
After activating your free two-year guarantee, your Dyson purifying humidifying fan will be covered for parts and labour {excluding filters and evaporator) for two years from the date of purchase, subject to the terms of the guarantee.

Even after your guarantee has ended, we’ll still be on hand to help.

Free Dyson parts and labour
Hassle-free replacement
Expert advice. Seven days a week.
‘How to’ videos and helpful tips

Your serial number can be found on your rating plate which is on the base of your machine.
Note your serial number for future reference.

This illustration is for example purposes only.

Assembling your machine

Use both honds to lift your Dyson purifying humidifying fon out of the box, by its bose.
Don’t lift it out by the amplifier loop.
Push down the Shroud release buttons on both sides of your machine to release the shrouds.
As the shrouds are removed the inner door, housing the evaporator, will spring open. Close the inner door, making sure it clicks firmly shut.

Your Dyson purifying humidifying fon comes with a Combination filter.
Remove the Combination filter from any protective packaging.
Push both the Combination filters into the shrouds until the tabs on the top and bottom click into place.
Put the shrouds into position on the main body and push gently until they click securely into place.

Place the remote control on top of the machine with the buttons focing down.
Plug in and switch on.

Filling the water tank

• Before you remove the water tank, make sure humidification modes are turned off and the water tank is empty.
• Push down the Water tank release buttons on the sides of your machine.
• Slide the water tank out of your machine.
• Carry the water tank by its handle to the top, and unclip the cop.
• Fill the water tank to the Max level with cold top water.
• Replace the cop and secure the cap clips in place.
• Slide the water tank bock into your machine until it clicks securely in place.

Using your machine

Information Manu

Press this button to scroll through the information being monitored by your Dyson purifying humidifying fan.
Information about air quality, temperature, humidity. Filter and evaporator levels are shown.
When a particular type of pollutant causes air quality to decrease, an icon for the pollutant will show on the LCD screen.

Auto Purify Mode

Set your Dyson purifying humidifying fon to Auto purify mode and the on-board sensors will intelligently adjust the settings of your machine according to the air quality.

Air quality: your machine will pause when the target air quality has been reached, switching on again when the air quality levels drop.

Airflow speed: the airflow speed will increase until the target air quality and temperature have been reached.
Night mode: your machine will only run with Airflow speeds from 1 to 4.

Auto humidify mode

Set your Dyson purifying humidifying fon to Auto humidify mode and the on- board sensors will intelligently adjust the settings of the machine according to the temperature and humidity of your room.

Room humidity: your machine
will pause when the target room humidity has been reached, switching on again when the room humidity levels drop.

Airflow speed: the airflow speed will increase until the target humidity level has been reached.
To turn off Auto humidify mode or to change the humidity levels manually, press the Humidity control button.

Oscillation

Press the Oscillation button and select the angle of oscillation to 0°, 45°, 90° or Breeze mode.
Pause the oscillation at any point by pressing the Oscillation button.
Press the Oscillation button again to resume.
To reset the Oscillation direction to the centre, press and hold the Oscillation button for two seconds.

Deep cleaning your machine

Important: don’t turn off or unplug your machine as the cleaning instructions will appear on the LCD screen.
To always get the best performance from your Dyson purifying humidifying fan, it is important to carry out regular deep cleaning to remove any limescale.

Before and after long periods where humidification is not used, it is recommended that additional Deep clean cycles are run.

In hard water areas you may need to run the Deep clean cycle more frequently. We recommend that filtered water is used to always get the best performance from your machine.

Your machine will alert you when it needs you to carry out a Deep clean cycle.
If you are connected to the Dyson Link opp, you will receive a notification message.
If you are not using the Dyson Link opp, the LCD screen on your machine will alert you and the Deep clean cycle button will light up.

To cancel the Deep clean cycle at any point, press and hold the Deep clean cycle button for five seconds.

Press the Deep clean cycle button on the front of your machine and your instructions will be shown on the LCD screen.

Push down on the Shroud release buttons to remove the shrouds. The inner door will spring open. Put the shrouds to one side as you carry out the Deep clean cycle.

Push down the Water tank release buttons on the sides of your machine.
Slide the water tank out of your machine and unclip the cap.

Remove the evaporator from your machine, place it in the water tank and refit the cap.

Changing your filters

The LCD screen on your machine will alert you when you need to change the filters.
If you are connected to the Dyson Link app, you will receive a notification message.
Go to dyson.co.uk/support/filters to buy your replacement filters.

Switch off and unplug your machine.

Push down the Shroud release buttons on both sides of your machine to release the shrouds.

As the shrouds are removed the inner door, housing the evaporator, will spring open.

Close the inner door making sure it clicks firmly shut.

Push the tabs on the top and bottom of the shrouds ta release the filters.

Dispose of your used filters in the bin.

Remove any protective packaging from the new filters.

Push the filters into the shrouds until the tabs on the top and bottom click into place.
Position the shrouds onto the base and push firmly until they click securely into place.

Plug your machine into the mains electricity supply and press the Standby button on the back of your machine.

Important: Reset your filter
Press and hold the Night mode button on the remote control.
The LCD screen on your machine will count down from five, finishing with the default screen.
The filter level will be reset and your machine is ready to use.

Continuous monitoring

With continuous monitoring turned on, your Dyson purifying humidifying fan will gather air quality, temperature and humidity information, which is displayed on the LCD screen and in the Dyson Link app.
Continuous monitoring is turned off by default. Once turned on, it will always be active until you turn it off again.

Continuous monitoring on/off

Press and hold the Auto purify mode button on the remote control for five seconds to turn it on. The LCD screen will indicate when continuous monitoring is on or off.

Wi-Fi Connectivity

Wi-Fi is on by default. To turn the Wi-Fi on or off, press and hold the Standby button on your machine for five seconds.

Looking after your machine

To always get the best performance from your Dyson purifying humidifying fan, it’s important to regularly clean it and check for blockages.

Cleaning

If dust accumulates on the surface of your machine, wipe dust from the amplifier loop, shrouds and other parts with a clean, dry cloth.
Look for blockages in the air inlet holes on the shroud and the small aperture inside the amplifier loop.

Use a soft brush to remove dust and debris.
Don’t use detergents or polishes to clean your machine.

Alerts

An alert icon may appear on your LCD screen to show your machine needs your attention.

Continuous alert triangle
Switch off and unplug your machine.
Leave for 10 seconds and then plug your machine back in and switch it on.
If the alert icon continues to show on the LCD screen, contact Dyson.

Temporary alert triangle
If the alert appears on the LCD screen and then disappears, continue to use your machine.
If any other alert icons show on the LCD screen, contact Dyson for further advice.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>