RYOBI HP74L 4V Lithium-Ion Cordless Multi-Head Screwdriver User Manual

RYOBI HP74L 4V Lithium-Ion Cordless Multi-Head Screwdriver

WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using this product.

SAVE THIS MANUAL FOR FUTURE REFERENCE

GENERAL POWER TOOL SAFETY WARNINGS

WARNING
Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery- operated (cordless) power tool.

WORK AREA SAFETY

• Keep work area clean and well-lit. Cluttered or dark areas invite accidents.
• Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite dust or fumes.
• Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

ELECTRICAL SAFETY

• Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce the risk of electric shock.
• Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges, and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
• Do not expose the battery pack to rain or wet conditions. Water entering a power tool will increase the risk of electric shock and fire.
• Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges, or moving parts. Damaged or entangled cords increase the risk of electric shock.
• When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
• If operating a power tool in a damp location is unavoidable, use a ground fault circuit interrupter (GFCI) protected supply. Use of a GFCI reduces the risk of electric shock.
• Use only UL-listed USB sources to charge this device. Use of any non-UL Listed USB sources may create a risk of fire.

PERSONAL SAFETY

• Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
• Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.
• Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energizing power tools that have the switch on invites accidents.
• Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
• Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
• Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.
• If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.
• Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles. A careless action can cause severe injury within a fraction of a second.
• Do not wear loose clothing or jewelry. Contain long hair. Loose clothes, jewelry, or long hair can be drawn into air vents.
• Do not use on a ladder or unstable support. Stable footing on a solid surface enables better control of the power tool in unexpected situations.

POWER TOOL USE AND CARE

• Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
• Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
• Disconnect the plug from the power source and/or remove the battery pack, if detachable, from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
• Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
• Maintain power tools and accessories. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
• Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
• Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.
• Keep handles and grasping surfaces dry, clean, and free from oil and grease. Slippery handles and grasping surfaces do not allow for safe handling and control of the tool in unexpected situations.

BATTERY TOOL USE AND CARE

• Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
• Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.
• When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
• Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
• Do not use a battery pack or tool that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion, or risk of injury.
• Do not expose a battery pack or tool to fire or exces-sive temperature. Exposure to fire or temperature above 265° F may cause explosion.
• Follow all charging instructions and do not charge the battery pack or tool outside the temperature range specified in the instructions. Charging improperly or at temperatures outside the specified range may damage the battery and increase the risk of fire.
• Do not charge battery tool in a damp or wet location. Do not use, store, or charge battery packs or products in locations where the temperature is less than 50°F or more than 100°F. Do not store outside or in vehicles.

SERVICE

• Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
• Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or authorized service providers.
• Hold power tool by insulated gripping surfaces, when performing an operation where the fastener may contact hidden wiring. Fasteners contacting a “live” wire may make exposed metal parts of the power tool “live” and could give the operator an electric shock.
• Know your power tool. Read the operator’s manual carefully. Learn its applications and limitations, as well as the specific potential hazards related to this power tool. Following this rule will reduce the risk of electric shock, fire, or serious injury.
• Always wear eye protection with side shields marked to comply with ANSI Z87.1 when assembling parts, operating the tool, or performing maintenance. Following this rule will reduce the risk of serious personal injury.
• Protect your lungs. Wear a face or dust mask if the operation is dusty. Following this rule will reduce the risk of serious personal injury.
• Protect your hearing. Wear hearing protection during extended periods of operation. Following this rule will reduce the risk of serious personal injury.
• Battery tools do not have to be plugged into an electrical outlet; therefore, they are always in operating condition. Be aware of possible hazards when not using your battery tool or when changing accessories. Following this rule will reduce the risk of electric shock, fire, or serious personal injury.
• Do not place battery tools or their batteries near fire or heat. This will reduce the risk of explosion and possibly injury.
• Do not crush, drop or damage battery pack. Do not use a battery pack or charger that has been dropped or received a sharp blow. A damaged battery is subject to explosion. Properly dispose of a dropped or damaged battery immediately.
• Batteries can explode in the presence of a source of ignition, such as a pilot light. To reduce the risk of serious personal injury, never use any cordless product in the presence of open flame. An exploded battery can propel debris and chemicals. If exposed, flush with water immediately.
• Under extreme usage or temperature conditions, battery leakage may occur. If liquid comes in contact with your skin, wash immediately with soap and water. If liquid gets into your eyes, flush them with clean water for at least 10 minutes, then seek immediate medical attention. Following this rule will reduce the risk of serious personal injury.
• Save these instructions. Refer to them frequently and use them to instruct others who may use this tool. If you loan someone this tool, loan them these instructions also.

SYMBOLS

ASSEMBLY

WARNING:
Do not use this product if it is not completely assembled or if any parts appear to be missing or damaged. Use of a product that is not properly and completely assembled or with damaged or missing parts could result in serious personal injury.

WARNING:
Do not attempt to modify this product or create accessories or attachments not recommended for use with this product. Any such alteration or modification is misused and could result in a hazardous condition leading to possible serious personal injury.

If any parts are damaged or missing, please call 1-800-525-2579 for assistance.

OPERATION

WARNING:

• Do not allow familiarity with this product to make you careless. Remember that a careless fraction of a second is sufficient to inflict serious injury.
• Always wear eye protection with side shields marked to comply with ANSI Z87.1. Failure to do so could result in objects being thrown into your eyes and other possible serious injuries.
• Do not use any attachments or accessories not recommended by the manufacturer of this product. The use of attachments or accessories not recommended can result in serious personal injury.

APPLICATIONS
You may use this product for the purposes listed below:

• Driving screws with screwdriver bits
• Light-duty drilling

TO CHARGE
See Figure 1,

• Insert the micro-USB cable into the product as shown.

• Connect the micro-USB cable to any powered USB port, or connect it to a USB power adapter (not included) and plug the adapter into a power supply.
  NOTE: Make sure the power supply is normal household voltage, 120 volts, AC only, 60 Hz.

• The LED charge indicator will turn on while charging and turn off once the screwdriver is fully charged or when the USB cable is disconnected.

• Upon full battery depletion, an estimate of 5 hours of charging time is required to fully recharge the screwdriver.

• Do not place charger in an area of extreme heat or cold. It will work best at normal room temperature.

• Remove the product from the USB power adapter (not included) or powered USB port once it is fully charged and ready for use.

• Disconnect the micro-USB cable from the screwdriver.

SWITCH TRIGGER
See Figure 2,
To turn the tool ON, depress the switch trigger. To turn it OFF, release the switch trigger and allow the collet to come to a complete stop.
NOTE: A whistling or ringing noise coming from the switch during use is a normal part of the switch function.
LED LIGHT
See Figure 2,
The LED light, located beneath the collet, illuminates when the switch trigger is depressed.

DIRECTION OF ROTATION SELECTOR
(FORWARD/REVERSE/CENTER LOCK)
See Figure 3,
The direction of bit rotation is reversible and is controlled by a selector located above the switch trigger. With the screwdriver held in normal operating position, the direction of rotation selector should be positioned to the left of the switch trigger for forward motion. The direction is reversed when the selector is to the right

NOTICE:
To prevent gear damage, always allow the collet to come to a complete stop before changing the direction of rotation.of the switch trigger.
Setting the direction of rotation selector in the OFF (center lock) position helps reduce the possibility of accidental starting when not in use.

To stop the screwdriver, release the switch trigger and allow the collet to come to a complete stop.
NOTE : The screwdriver will not run unless the direction of rotation selector is pushed fully to the left or right.

TO LOAD/RELEASE BITS
See Figure 4, page 9.
Insert the bit into the collet and push the bit in as far as possible. To remove a bit, pull the bit straight out of the collet.
NOTE: For ease of removal, the use of 2 in. bits is recommended.

INSTALLING/REMOVING DRILL HEADS
See Figures 5 – 6,
NOTE: Drill heads can be installed at different angles to best suit your application needs.

• Release the switch trigger and allow the collet to come to a complete stop.
• Depress the tabs on both sides of the end cap
• Pull the end cap away from the collet.
• Place the desired drill head on the screwdriver so that openings in drill head fit on the raised tabs of the screwdriver.
• Push the drill head onto the screwdriver until it snaps into place.
• To remove, depress the tabs and pull the head away from the screwdriver..

DRIVING SCREWS
See Figures 7 – 9

• Install the appropriate drill head or end cap for the operation you are attempting.
  NOTE: When screwing in tight or narrow spaces the right angle or offset drill heads are recommended.

• Load a bit into the collet or drill head.

• Check the direction of the rotation selector for the correct setting (forward or reverse).

• Hold the tool firmly and place the bit at the point where the screw is to be driven
  WARNING:
  Do not drive a screw where there is likely to be hidden wiring behind the surface. Contact with a “live” wire will make exposed metal parts of the tool “live” and possibly shock the operator. If you must drive a screw where hidden wire may be present, always hold tool by insulated gripping surfaces (handle) when performing the operation to prevent a shock to the operator.

• Depress the switch trigger to start the tool.

• Apply only enough pressure to keep driving the screw. Do not force the tool. Let the tool do the work.

MAINTENANCE

WARNING:
To avoid serious personal injury, always place the tool in the center lock position before cleaning, performing any maintenance, or when storing the tool. Failure to heed this warning could result in serious personal injury or property damage.

WARNING:
When servicing, use only identical replacement parts. Use of any other parts could create a hazard or cause product damage.

GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, dust, oil, grease, etc.

WARNING:
Do not at any time let brake fluids, gasoline, petroleum-based products, penetrating oils, etc., come in contact with plastic parts. Chemicals can damage, weaken or destroy plastic which could result in serious personal injury.

BATTERIES
This product is equipped with a lithium-ion rechargeable battery. Length of service from each charging will depend on the type of work you are doing.
The battery in this product has been designed to provide maximum trouble-free life. However, like all batteries, it will eventually wear out.
To obtain the longest possible battery life, we suggest the following:

• Remove the product from the charger once it is fully charged and ready for use.
  For product storage longer than 30 days:

• Store the product where the temperature is below 80°F.

• Store the product in a “discharged” condition.

BATTERY PACK REMOVAL AND PREPARATION FOR RECYCLING
See Figure 10

• Remove the five Phillips head screws securing the motor housing cover, then remove cover.

• Lift the battery from the motor housing enough to expose leads and battery terminals.

• Use wire cutters to cut the red wire first. Then cut the black wire.
  WARNING:
  Do not cut both wires at the same time. This can cause the battery to short-circuit, which can result in serious personal injury.

• Remove the battery for disposal.
  To preserve natural resources, please recycle or dispose of batteries properly.
  This product contains lithium-ion batteries. Local, state or federal laws may prohibit the disposal of batteries in ordinary trash.
  Consult your local waste authority for information regarding available recycling and/or disposal options.

WARNING:
Upon removal, cover the battery pack’s terminals with heavy-duty adhesive tape. Do not attempt to destroy or disassemble battery pack or remove any of its components. Lithium-ion batteries must be recycled or disposed of properly. Also, never touch both terminals with metal objects and/or body parts as short circuit may result. Keep away from children. Failure to comply with these warnings could result in fire and/or serious injury.

ILLUSTRATIONS START ON PAGE 9 AFTER THE FRENCH AND SPANISH LANGUAGE SECTIONS.

Parts

A – Offset drill head
B – Right angle drill head
C – Endcap
D – Collet
E – LED work light
F – Switch trigger
G – Direction of rotation selector (forward reverse/center lock) [sélecteur de sens de rotation
H – LED charge indicator (indicateur de charge DÉL, indicador de carga con LED)
I – Micro-USB cable

A – USB power adapter (not included
B – Micro-USB cable (câble micro USB, cable micro USB)
C – Micro-USB port (port micro USB, Puerto micro USB)
D – LED charge indicator (indicateur de charge DÉL, indicador de carga con LED)

A – LED worklight (lampes à DEL, luz de trabajo de LED)
B – Switch trigger (commutateur, interruptor)

A – Reverse (arrière, adalante)
B – Forward (Avant, atras)

A – Bit
B – Collet

A – Depress tabs to release end cap

A – Right angle drill head
B – Endcap
C – Offset drill head
D – Raised tabs A – Endcap

A – Right angle drill head

A – Offset drill head A – Screw
B – Motor
C – Battery
D – Wire cutters
E – Red wire
F – Black wire

To request service, purchase replacement parts, locate an Authorized Service Center or obtain Customer or Technical Support:
Visit www.ryobitools.com or call 1-800-525-2579
If any parts or accessories are damaged or missing, do not return this product to the store. Call 1-800-525-2579 for immediate service.
Please obtain your model and serial number from the product data plate.
This product is covered under a 3-year limited Warranty. Proof of purchase is required.
MODEL NUMBER ___ SERIAL NUMBER ____
Model number on product may have additional letters at the end. These letters designate

ONE WORLD TECHNOLOGIES, INC.
P.O. Box 1288, Anderson, SC 29622 • Phone 1-800-525-2579
États-Unis, Téléphone 1-800-525-2579 • USA, Teléfono 1-800-525-2579
www.ryobitools.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>