Trevi XF 300 POP Portable Speaker Instruction Manual

Trevi XF 300 POP Portable Speaker

NOTES ON USE

This is a precision electronic appliance; avoid using it in the following cases:

• Listening to high volume for a long time could damage your hearing.
• Do not close the ear to the loudspeaker during step setting and volume adjustments, and in particular keep the volume down at the ignition
• Near strong heat sources, such as central heating plants or stoves.
• In very humid places such as bathrooms, swimming pools, etc.
• In very dusty places.
• In places subject to strong vibrations.
• Position the appliance in such a way that there is always enough room for free air circulation (at least 5 cm).
• Do not block the air inlets.
• If any liquid enters the appliance, unplug it immediately from the socket and take it to the nearest TREVI authorized service Centre.
• Before switching on the appliance, always check that the power cable and the connection cable are properly installed.
• The apparatus shall not be exposed to dripping or splashing water. No objects filled with liquid, such as vases, should be placed on the unit.
• No naked flame sources, such as lighted candles, should be placed on.
• Keep this manual.

CARE AND MAINTENANCE

Use a slightly damp soft cloth for cleaning. Do not use solvents and abrasive substances.
IMPORTANT
This device is designed for home use (not professional use). This appliance has been carefully built to ensure long-lasting perfect performance. However, should any inconvenience occur, please contact your local authorized TREVI Service Centre.
TREVI follows a policy of ongoing research and development. Therefore products may have different features from those described.

CONTROL PANEL

CONTROLS AND SOCKETS TO DEVICE

1. Charging jack
2. Backward
3. Forward
4. Play/ Pause
5. Mode (Switch Bluetooth, USB disk, SD, FM and AUX-IN state).
6. LED display
7. SD slot
8. Bass knob
9. Volume knob
10. On/Off button
11. Mic input 1
12. USB port
13. Mic input 2
14. Aux-in jack
15. Mic Echo knob
16. Mic volume knob
17. Sub-Woofer
18. Carrying handles

ACCESSORIES INCLUDED

• Unit
• Charge Cable (USB/ DC jack)
• Stereo cable Jack/Jack 3.5mm
• Microphone wire
• User manual
• Warranty

Note: Keep this manual for future reference

TRANSPORTATION

To carry the device can use the handles (18) by pulling them from the cabinet.

POWER

This unit works with rechargeable Lithium battery.

1. The charger is not included in the accessories. Please use the universal 5V/1A charger to charge this devices. Put the provided charge cable into the charging jack, connect the other end to the charger, the charging indicator beside the LED screen will keep lighting.
   (When playing music during charging, please put the volume to middle, because for some music with heavy bass, the charger may can not afford the high current temporarily under the maximum volume)

2. Charge time should be 4-6 hours. When charging full, the indicator light will switch off.

3. To prolong the life of battery, DO NOT CHARGE CONTINUOUSLY FOR LONGER THAN 8 HOURS.
   Lamp status LED charging:

   • RED LED light fixed: with the device switched off or in use indicates that the battery and ‘being charged.
   • RED LED indicator off: with the device switched off or in use indicates that the charging process is complete, the battery is charged.

Caution:

• Do not connect the appliance to sockets with a voltage other than that indicated.
• Do not use cables other than the supplied one.

BASIC FUNCTIONS

POWER ON/OFF

Press the main switch ON/OFF (10) to position ON to turn the power.
Press the main switch ON/OFF (10) to position OFF to switch off.

MODE SETTING FUNCTION

To change the mode function, press more ‘times the MODE key (5) to select RADIO (display show the frequency), BLUETOOTH (the display “Bt”), USB (only if the USB socket (12) is connected to a memory, the display shows “Lod” for a few seconds), SD (SD only if the slot (7) is connected to a memory, the display shows “Lod” for a few seconds), AUX (only if input Aux-in (14) cable is connected stereo Jack/Jack 3.5mm supplied the display shows “Aux”).

ADJUSTING THE VOLUME

1. Turn the volume VOL. (9) to increase or decrease the overall volume of playback.
2. Turn the MIC VOL (16) to adjust the volume level signal inputs MICROPHONE (11) (13). The adjustment acts on the two inputs simultaneously

SETTING BASS TONE

Turn the knob BASS (8) to adjust the bass.

ECHO EFFECT

Turn the knob ECHO (15) to increase or decrease the echo effect on the inputs MICROPHONE (11) (13).
Note: the echo only works on microphone inputs.

FUNCTION RADIO FM

Under FM radio state, the audio cable provided treat as antennal. Please insert the audio cable to get best FM signal before using.

AUTO MEMORY

1. Turn on the unit and press repeatedly the MODE key on unit and select RADIO function (the display will show the frequency).
2. Press button on the unit to activate the auto memory (the radio starts an automatic search radio stations and saves them automatically). The station’s number stored depends on the radio signal in your area. During the search, press button to stop recording.
3. Use the buttons to listen to the various radio stations saved in memory.

BLUETOOTH OPERATION

1. Turn on the unit and press the MODE(5) button to select the Bluetooth function, the display shows “Bt”.
2. In Bluetooth mode, the “Bt” on the display will light up, you will hear two beeps, the system automatically enters search mode.
3. Activate the Bluetooth feature on the external device to be coupled.
4. Initiate a search for devices. After select the “XF 300 POP”.
5. Enter the password “0000” if required.
6. Press button to start playing and for change the songs.

PLAY ON INPUT USB/SD

1. Turn on the unit.
2. Insert a USB memory or an SD card into the USB, SD slot. Playback starts automatically.
3. To pause playback, press the key, the display will show the icon.
4. To resume playback, press key.
5. Press button to switch to the next track. Press button to switch to the previous tracks.
6. Press and hold the buttons to quickly search for a particular piece of music. Release the button to resume normal playback.

Note:

• The player may not support some USB devices, this is due to the incompatibility of some processors.
• To avoid harmful interference, always connect USB devices directly to the unit, do not use extension cords.
• From the computer to format the USB memory/SD FAT (16 or 32).

AUX-IN

1. Turn on the unit.
2. Connect any unit equipped with audio output, through a cable 3.5mm jack (included) to the AUX IN.
3. The device will automatically go to the function “AUX IN”, the display will show “AUX”.
4. Use the external device from their commands.

USING THE MICROPHONE

1. Connect the supplied microphone into the jack MIC.
2. Turn on the microphone using the switch on the handle of the microphone to the ON position.
3. Adjust the volume of the microphone input and the echo effect as desired using the appropriate commands.
4. Press to activate the MUTE function, press it again to turn off the mute function.

Note:

• You can use two microphones simultaneously (second microphone not included).
• With microphone connected, the radio does not work. Remove the microphone jack for normal operation.
• The microphone is active on the Bluetooth function, USB / SD and AUX-IN.

INFORMATION NOTE ON THE REMOVAL AND DISPOSAL OF BATTERIES

Warning: Only high-qualified personnel should perform this operation!

BATTERY REMOVAL

The appliance should not be plugged to the mains socket when performing this operation!

1. Remove the screws that secure the structure of the trolley and take it apart.
2. Remove the screws that secure the rear panel speaker amplified and remove the panel;
3. Locate the battery;
4. Remove the screws that secure the supports of the battery, remove the supports, disconnect the battery and remove it.

Used batteries should not be disposed of with household waste or thrown into fire or water. Used batteries should be recycled or disposed of in separate waste collection Centre.

SPECIFICATIONS

• Rechargeable battery capacity: Lithium battery 3.7V, 1800mAh
• Voltage: 5V
• Bluetooth version: 2.1 + A2DP
• Bluetooth transmission power: 2,5mW
• Bluetooth transmission: 2,4GHz
• Radio FM: 87.5 – 108.0 MHz
• Frequency Response: 100Hz – 20KHz
• Subwoofer size: 6 inch
• Speaker size: 3 inch
• Format supporting: MP3
• USB/SD supporting: 32GB
• Power sound max: Max 15W
• Sound Bar Dimensions: 310x215x225mm
• Weight: 2,9 KG

SIMPLIFIED EU DECLARATION OF CONFORMITY

Hereby TREVI Spa declares that the radio equipment type XF 300 POP is in compliance with directive 2014 / 53 / EU.
The full text of the EU declaration of conformity is available at the following internet address www.trevi.it

Trevi S.p.A.
Strada Consolare Rimini-San Marino, 62 47924 Rimini (RN) Italy
Tel. 0541/756420 – Fax 0541/756430 – www.trevi.it – Email: info@trevi.it

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>