LISKA SV-SW5 Smart Watch Instructions

LISKA SV-SW5 Smart Watch Instructions

1. Exterior Description

1.1 Introduction to Device

1.2 Basic operations

Power Button: Press to turn on / off the screen display
Hold it to turn the watch on or off.
Back Button: Press to return to the previous interface.
Note: When the LED indicator flashes, it means the watch is monitoring heart rate and blood pressure.
Do not look directly at the blinking sensor light when you detect it, as it may cause eye irritation

1.3 Charging Instructions

1. Connect the equipped magnetic charger to the metal contact on the back of the clock and insert the other end of the ch arger into the USS wall charger or the USS mtertace of the computer.
   Charge under the fo llowing circumstances: Use for the first time. When the battery is low and automatically turns off.

2. The screen is displayed in charging statu s.
   Note : Do not look directly mto the fla shing sensor light dunng charging as it may cause eye irritation.

2. Proper use and friendly reminder.

2.1.Usually used on 1-2 fingers of the wrist. The smart watch sensor must be close to the skin. To obtain an accurate result of frequency monitoring It is not recommended to wear it tight and it does not shake. Otherwise, it will affect blood circulation
2.2. With the functions of waterproof, sweat-proof, rain-proof, it can be used directly in daily washing, shower (cold water) and other daily environments.
2.3. Do not use in baths, sauna, hot springs or other hot environments with hot water and steam, which will cause product failure.
2.4. Due to the action of water pressure, do not use it while swimming or diving

3. Application Download and supported operating system

Download and install the “WearHealth” app by searching for “WearHealth” in “App Store” on iPhone or “Google Play” on Android phones
Note: The mobile phone must be compatible with Android 4.4 or iOs 8.2 or higher and Bluetooth 4.0 or higher.

4. Device connection / pairing

4.1.Tips for the first pairing and connection ,_ Android Google Play

1. Make sure that the Bluetooth and GPS of your phone have been activated before accessing the application. •~ . iOS APP Store
2.  After turning on the application, register an account and enter your personal information according to the request. (Note: To ensure normal connection and use of the watch, allow requests to receive messages, calls, etc. Make sure your Android phone has accepted that WearHealth can access apps on the phone about WearHealth ).
3. Make sure the watch battery with enough power and the connection distance is within 80cm
4. When the watch and app are paired and connected for the first time, the time, date, steps, and calorie symbols on the watch will sync with the mobile phone Whether disconnected for a long time, the weather data cannot be updated. You need to link the app one more time to update the data

4.2. How to connect: Mine – Connect a device – select “S10plus”

Al this time, there are two situations:

1. iOs system: a pairing request will appear, so you only have to click “Confirm” to connect.
2. Android Phones: No pairing request, please connect directly
   A The union is complete. Note: You must pair your watch in this app, not directly via the phone’s Bluetooth connection.
   B. If you can’t search for S10plus, check if the above tips are followed or reset the watch.

4.3. Automatic Bluetooth reconnection

1.There is no reminder on the watch when it is out of the Bluetooth connection range. However, Bluetooth will automatically reconnect when the watch reaches the valid range of the Bluetooth connection
2. If you close the app in the background or restart the phone or click “one- click cleanup” on the phone, you need to enter the “WearHealth” app again. And Bluetooth will automatically reconnect within the valid Bluetooth connection range.

5. Application – Main pages (Today – Sport – Support- Mine)

5.1. Today: Touch the central banner to access the records (includes the last and previous) heart rate and blood pressure. The data above is the latest monitoring data; The following data is past monitoring data
5.2. Sport: (Take iPhone 7 as an example): Touch start running, you will see figure 1 after 3 seconds; Hold down for 5 seconds, you will see Figure 2; Touch/ to continue or stop running. If you tap on the top right image, you will see Figure 3 (current execution data).

5.3. Support: Tap the + icon, add your friends who have registered this app. You can add your friends by searching for their nickname, phone number or email.
5.4. Mine: (Target – Suspend Target – Device Management – Find Computer – Photo – About)
Touch (/;} Target Steps, move the target steps (3000 ~ 30000 steps) and select your target steps. Then tap “Confirm”
Touch &, Sleep Target, move the sleep target (hours: 00 ~ 09h; minutes: 00 ~ 59m) and select your sleep target. Then tap “Confirm”
Touch & Device Management, you can choose to enable or disable “Lift wrist” to activate the screen, Call reminder, SMS reminder,

Continuous heart rate monitoring, Do not disturb, Screen saver settings. More reminders from various apps, such as Wechat, 00, Skype, etc. And also unplug the clock, set
alarm, time format, unit, update and restart your clock.

Note

1.  ln “More reminders”, notification for all apps is disabled bv default, so vou need to enable notification for the corresponding applications if you want to receive massages or calls from this application. Note: • : OFF; • SWITCHED ON.
2. Except for these app notifications, there are four reminders for taking medications, meetings, sedentary lifestyle and drinking.
   Touch @ Search equipment to search for your watch. the watch will vibrate if you search successfully.
   Touch ,C. Photo to access your smartphone camera. Take photos by shaking your watch to control the camera remotely.
   Tap CD About to check the app version, operation guide, FAQ, and write your suggestion in Comments
   

6 . Main menu.

Change interface.

On the watch interface, swipe left and right to change the interfaces of the main functions; slide up and down to easily switch interfaces between
secondary function and clock; Hold the clock interface to access the clock information or slide down the clock information interface to return the clock mterface.

6.1 Introduction to the mam functions.

1. Heart rate (HR) and blood pressure (BP) monitor. In the heart rate / blood pressure mterface, the watch will monitor automatically your heart rate / blood pressure for about 30 seconds. Sensor LED mdicator blinks green when 1s detected. Also, you can enable continuous heart rate monitonng m the app’s “Device Management” (Mine – Device Management – select to enable “Continuous Heart Rate Monitoring”). After that the clock will start Automatically to continuously monitor your heart rate every 5 minutes and wi ll sync data with the app. Note:

Note:

1. When you are momtonng your heart rate on the watch, the resistance of the watch will decrease

2. Although this product 1s used to dynamically detect heart rate in real time, please keep your body sitting or idle while detecting heart rate. Othe,wise, the time for the heart rate monitor will be prolonged or data cannot be measured. After the watch has obtamed the measurement data, you can view the dynamic heart rate data m real time or move around. Yes there area big difference m the measured data, take a break to re-measure. The average value obtained after 5 consecutive measurements will be more accurate

3. This product is dynamic measurement of heart rate in real time, so the heart rate will be different when talking , eating , drinking, etc. The monitoring value may be closer to your actual situation when you are calm .

4. Blood pressure measurement data is for reference only. It cannot be used as a basis for related medical aspects.

5. Sleep momtor. In this function, you can see the total sleep time of each night. Record your sleep from 22 :00 pm on the current day until 8:00 am the next day. The watch exits sleep monitoring mode after generating the data. Sleep data detected by the watch they wlll be synchronized and updated in “Sleep” in the app by manually removing the “Today” interface from the app

6.2 Introduction of secondary functions

1. Select screen
   Find and tap this icon (right image) to access its function. Swipe left or right to scroll 5 screens different. Select one of your favorite screens and touch 1t to confirm.

2. Multi -sport mode.
   Find and tap this icon (right image) to access its function. Swipe left or right to cycle through 9 sports different (Run / Climb / Walk / Ride I Soccer I Basketball / Badminton / Pmg Pong / Swimming), select one of your favorite sports and tap it to get started. Note ►. Continue; Leave

3. Settings
   Find and tap this icon (right image) to access its function. A related list wlll be displayed, mcludmg brightness, auto lock, restart. If the app can’t find the clock, please reset it.

4. Remmder.
   Only by connecting the “WearHealth” app successfully can you synchronize the date and time of the watch, set message and call notifications, continuous monitoring of the heart rate, remote shooting and get your specific heart rate, sleep and other data.

7. Specifications

Dimensions .                                      4 8 x 48 x 12 mm
Weight .                                               52 gr
Screen ..  1.3 TFT color screen
Resolution ..                                        240 x 240 dpi
Box material                                        Curved acrylic mirror + alloy frame
Bracelet materi al                                TPU + leather sihcone material
Battery .                                              350 mAh
Duration at rest .                                 40 days
Duration m operation .                       15 – 20 days
Bluetooth effective distance .            . 10 m (m open space)
Load ..                                                5V / 500 mA charge USS, computer USS
Loading time                                      3 hours
Waterproof .                                     . IP68
Supported message notifications .. QQ / Wechat / Linkedin /Skype/ Facebook I Twitte r / WhatsApp / Viber / Lme
Compatibi lity… ✓ iOS8.2+ I Android 4.4 / Smart phones with Bluetooth 4.0 or above
X iPad /Tablet/ HuaweiP8 / SamsungS7 +S8 + J3 / LG /Windows/ PC / Phone / Tablet

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>