Source Creative Technology Source Creative Retro Radio Speaker User Manual
- June 6, 2024
- Source Creative Technology
Table of Contents
Retro Radio Speaker
FB-R302
User Manual
LOCATION OF CONTROLS
- ON/OFF switch
- Operation mode change button
- [ ] quickly press to replay the previous track
- [ ] quick press to play/pause 5.
- [ ] quicky press to skip to the next track
- Aux-in socket
- USB plug
- Charging indicator
- Micro USB socket for charging
- Volume botton
- FM radio station knob
Contents of the color box
Ix Retro Radio Speaker
lx Charging cable
lx User manual
SECURITY INSTRUCTIONS
- In order to avoid electric shock, do not expose this unit to rain or moisture. Also, do not open the cabinet and refer all repair and maintenance procedures to qualified service personnel.
- Do not use the unit if its power cord is damaged in any way.
- When the unit is not in use, unplug it from the power outlet by holding it directly, never unplug it by pulling on its power cord.
- The unit should not be exposed to dripping or splashing liquids. Similarly, do not place objects with liquids inside on the unit.
- Never try to repair or open the unit yourself.
- Do not place the unit near heat sources, or in places where it will be exposed to direct sunlight.
- Use the unit only with accessories recommended by the manufacturer.
Blue- Connect Connection
-
Set the ON/OFF button to the ON position. -the device will turn on:
The blue signaling the BT mode will flash quickly. -
Turn on the Bluetooth function on your mobile device and search for the “FB-R302”
-
Once the connection is successful, the blue BT LED will light steadily.
Note: If a previously connected device comes within range of the unit, the unit will connect to this device automatically.
Charging the Retro Radio Speaker
Pulg the pin of the USB 5V DC charging cable into the DC 5V/USB socket on the backside of the speaker. Plug the other end into a USB port on your computer or any other device allowing USB charging. The LED on the backlights is in red when the unit is charging.it will shut off when the battery is fully charged.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This equipment should be installed and operated with a minimum distance of
20cm between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>