Badmobil 7912533 Washbasin Cabinet Instruction Manual
- October 27, 2023
- Badmobil
Table of Contents
Badmobil 7912533 Washbasin Cabinet
TOOLS & PARTS INCLUDED
INSTALLATION
Instructions for mounting and use
Dear customer,
Congratulations for purchasing our bathroom furniture, which will provide you
with long-lasting pleasure, if you will follow our instructions for cleaning
and maintenance:
- Keep the packaging material and small parts out of the reach of children.
- Please polish the furniture and the mirror with a moist cloth, only use mild detergents.
- Please mind the instructions of microfibre cloths. Unsuitable microfibre cloths can do severe damage to the fronts.
- No alcoholic, scratching or aggressive cleansing agents (glass detergents).
- Please wipe the furniture always with a dry cloth to avoid any damages to the material (swelling) or of the minror surface (blind stains) because of remaining water.
- Do not use steam cleaner. The use of steam cleaners leads to swelling of the wood and ruins the furniture.
- All fittings of the basin plate in contact with other cupboards and walls or to the base itself have to be sealed with silicone or other appropriate sealing materials.
- Protect your furniture – if in contact to shower or tub – by a shower severance.
- Please note that we cannot accept any complaints regarding damages of extraordinary effects by water or humidity. Our bathroom furniture is meant for use at regular bathrooms conditions, including shorttime air humidity of 90 % {no sauna).
- The included hooks and dowels are only suitable for walls of masonry, bricks MZ20 hole bricks HLZ20 or concrete B25.
ATTENTION! Before mounting please check the product to see if any damage
has been caused during transportation. Please keep the packaging in case of
complaint. Please note that we cannot accept any complaints regarding damage
after the product has been mounted.
Information for furniture with electrical connection and lighting:The
electrical device must be connected by a qualified electrician in compliance
with IEC 60364-7-701!
To increase security an RCCB (Rated leakage current – 30mA- EN 61008) has to be provided on-site/by customer. Avoid unattended operation of device. Disconnect control gear during thunderstorms or when not used for a longer period. By this means damages caused by lightning or voltage surges can be avoided. An outer cable must be replaced only by a specialist. The trafo-box cannot be repaired and must be replaced. When changing bulbs, make sure that the maximum wattage 0N) and the voltage M of the replacement bulb conform to the transformer or lamp.
- Disconnect the power supply before changing bulbs. In case of a fixed installation, the electrical connection has to be equipped with a separating appliance (f.ex. switch).
- Protected isolation, protection class I, appliance with protected connection (yellw/green).
- Protected isolation, protection class II, appliance without protected connection.
- Protected isolation against low voltage (S 50V), protection class Ill, appliance without protected connection.
- For direct installation on heavy or normal infallable materials.
- Suitable for installation in furniture, but not on normal inflammable surfaces.
- The average life time of our LEDs is 15,000 hours. The optical power is around 70% of the exit optical power after the mentioned lifetime.
- Avoid a longer direct visual contact with the LED light source since otherwise damage to the eye could arise.
- Protect lamp from moisture or wetness during.
- Minimum distance to the illuminated surface f.ex. 10 cm.
- This lamp is not suitable for cool beam lamps.
- For halogen lamps: bulb becomes extremely hot {up to 350 • C), before changing the buld or adjustment of the lamp allow to cool down the bulb I
- Halogene bulb with protection against bursting.
- For halogen lamps: Always use a cloth when handling bulb or inserting into the socket!
- For halogen lamps with protective glass: A broken protective glass must be replaced immediately!
- Electronic products are not allowed to disposed to houshold rubbish. Supply these products to suitable recycling companies. Please inform you by your commune or a disposal company about the suitable recycling options.
ATTENTION HIGH RISK OF BREAKING
If the article is to be shipped, please pack it in exactly the same fashion as how you recived it. Use the original packing with filling and padding material. As otherwise, we would have to charge You for any damage occurring in transit!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>