ETENWOLF T300 Digital Tire Pressure Gauge User Manual

**User Manual

**

Model : T300

If you have questions or comments, contact us.

support@etenwolf.com

Thank you for choosing ETENWOLF.

Thank you for purchasing the T300 digital tire pressure gauge from ETENWOLF. With your purchase, you get:
Professional-level accuracy, mechanic recommended, performance-tested, and calibrated accurately to professional ANSI B40.7 3A standards.
Sturdiness. The ETENWOLF digital tire gauge can withstand a run-over by a car and remain undamaged.
The world’s first LED screen used on a tire gauge, which brings brighter lighting in the outdoor sun, and less power consumption.
Each product has been carefully tested by our engineers before presentation to users.
Before using the device, carefully read and adhere to the following instructions for maximum performance and security. If you need help or support from our customer service team, you are welcome to get in touch with us via support@etenwolf.com

WARNING

• The product comes with two AAA non-rechargeable batteries. Do not charge them in a charger and avoid placing them in a fire.
• Overheating, damage, or water may increase the risk of fire or explosion. It’s best to keep the product away from heat sources and not leave it for prolonged periods in a hot car.
• Keep this product out of children’s reach.
• Please store the product within temperatures ranging from -4°F~131°F/-20°C~55°C. Extremely hot or cold temperatures may damage the battery and shorten the lifetime of the gauge.
• Make sure the pressure unit of measure is correctly selected. Mixing up PSI, BAR, and KPA could lead to incorrect measurement.
• A measurement of more than 200 PSI will damage the gauge.
• Before checking Presta valve tire pressure, please put on the valve adapter (included).

PRODUCT OVERVIEW

1. LED Light

2.  Nozzle

3. Power/Unit Button Trigger

4. LED Screen

5. 2 x AAA Batteries
   Negative end (-) goes on the longer spring
   Positive end (+) goes on the shorter Spring

6. Presta Valve Adapter

7. Battery Cap

SPECIFICATIONS

OPERATION INSTRUCTIONS

1.  Push the button to turn on the gauge. The gauge will display “0.00” on the LED screen.

2. Push the nozzle of the gauge onto the tire valve. Press firmly to ensure a good seal and that no air is escaping to ensure accurate readings. Hold the gauge on the valve until the reading locks.

3.  Read the pressure on the screen.

4. Press the button to switch units ofmeasure between BAR, PSI, andKPA. Hold down the button for 6seconds to turn off the gauge. Itwill also automatically turn offafter 30 seconds when not in use.

5. Power and Batteries Squeeze in with two fingers to open the battery cap.
   ETENWOLF recommendation: send used AAA batteries to battery recyclers or check with your local or state solid waste authority for disposal instructions.

6. Battery Level Indicator
   The battery level will be displayed when the battery is low.
   Not shown = between 20%-100%
   Orange = between 10% – 20%
   Orange flashing = under 10%

7. Presta Valve Adapter
   The package contains a Presta valve adapter. Use the Presta valve adapter to change a Presta valve to a Schrader.
   Before measuring, loosen the locking nut on the valve stem.
   P.S. The adapter is placed in the battery cap slot.

TROUBLESHOOTING

seconds.
Inaccurate Readings| 1.Adjust the angle of the gauge nozzle to the valve;
2.Press firmly to make sure there is a good seal;
3.Contact the ET ENWOLF Support Team for maintenance or replacement.
Low Battery Flashing Screen| Replace batteries
Displays Abnormal Readings| 1.heck if the temperature is outside of the working range “4-1513`F/20-70’C:
2. heck whether the right measurement unit is chosen.
Air Leakage| 1.initially, a small amount of air will escape when the gauge is attached to the valve,
2.Make sure the valve seals well with the nozzle,
3.Ensure the nozzle angle is straight when it is placed on the tire valve:
Contact ET ENWOLF Support Team for maintenance or replacement.
Gauge Will Not Tum On| 1.0 heck if the batteries are drained and replace them if necessary,
2.Check if the gauge is damaged from dropping or immersed in water.

Your Warranty Includes

• 3-Years Coverage
  Within 3 years of purchase, we will provide timely and effective online after- sale service. We will repair or replace any defective product (due to manufacturing fault) within this warranty period. Please note that batteries are not included in the warranty.

How to Return Your ETENWOLF Product

• Contact support@etenwolf.com with your order number.
• We will issue you a return label for your item.
• We will issue your replacement or refund upon receiving the return package.

www.etenwolf.com
support@etenwolf.com
www.facebook.com/etenwolf Zhou’s Jade Star UG Brunnenallee
11A 14478 Potsdam Germany
Made in China

References

• ETENWOLF® Air Inflator | Tough Tools Redefined

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>