Merrychef eikon e4s Daily oven cleaning Instructions
- June 6, 2024
- MERRYCHEF
Table of Contents
Merrychef eikon® e4s
Daily oven cleaning
IMPORTANT:
A daily cleaning routine will ensure that you comply with the required hygiene
standards, as well as help maintain the efficiency of your Merrychef oven.
It is very important to cool down the oven before cleaning.
| You will need
PPE:
• heat proof gloves
• protective rubber gloves
• eye protection Cleaning materials:
• non-abrasive nylon scrub pad
• cleaning cloths
• Merrychef oven cleaner (or Merrychef approved cleaning chemicals)
• Merrychef oven protector|
---|---|---
Cool down the oven
| 1. Press the hand icon from the main menu (full serve mode) or the blue
thermometer icon (quick serve mode).
---|---
| 2. Place a pan of ice into the oven to speed up the cool down process.
Press the green tick.
Do not leave the pan of water in the oven overnight.
| 3. Leave the door open slightly. Wait for temperature to reduce to 50°C or
122°F. This takes approximately 20 mins.
| 4. Once the cooling process is complete you will see a `clean cavity’
screen. Remove the pan of water. The oven is now ready for cleaning.
Pan and water maybe hot. Use heat proof gloves.
Clean the cold oven ****Wear PPE
| 1. Remove the oven rack and base plate.
---|---
| 2. Wash all parts in warm soapy water using a sponge. Rinse off and dry
using a clean cloth. Remove any spillages with a suitable cloth or paper
towel.
| 3. Use a dry clean brush to remove any food particles from between the
cavity floor and the inside of the front door.
| 4. Spray Merrychef approved cleaner onto a sponge and wipe onto the sides
of the inside of the oven, the back, the base, the roof and the
oven door.
Do not spray directly into the cavity. Avoid the door seal.
| 5. For difficult areas, leave to soak for 10 minutes with the oven door
open.
Clean the cavity using a non-abrasive sponge.
Do not scrub the door seal.
Do not spray directly into the
| 6. Remove the Merrychef cleaner with a clean wet cloth. The door seal can
also be gently wiped if necessary to remove food debris.
Dry the oven with a clean dry cloth. Replace the base plate. Press the tick on
the ‘clean cavity’ screen to continue.
| 7. Apply oven protector (optional). Spray Merrychef Protector onto a sponge
and spread lightly onto the sides of the inside of the oven, the back, the
base, the roof and the oven door and heat oven afterwards.
Avoid door seals.
Heat oven to cure the protective chemical.
| 8. Replace the wire rack and press the green tick to continue.
| 9. Remove the air filter and wipe it clean or wash in soapy water. Dry and
replace and then press the green tick to continue.
| 10. Switch the oven off. Wipe the outside of the oven with a clean
sanitised cloth.
WARNING: Do not use the oven without a clean filter in place. Do not use caustic cleaners in the oven cavity as they cause permanent damage to the catalytic converters. Do not use tools, sharp implements or harsh abrasives on any part of the oven.
For more information please visit www.merrychef.com/videos
32Z9006 e4s cleaning guide September 2020.
©2020 Welbilt Inc. All rights reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>