ThermoPro TP359 Bluetooth Humidity and Temperature Monitor User Manual
- June 6, 2024
- ThermoPro
Table of Contents
ThermoPro TP359 Bluetooth Humidity and Temperature Monitor
Introduction
Congratulations on your purchase of a Smart, Remote Bluetooth-connected Thermometer/hygrometer. You will now be able to remotely monitor the temperature and humidity of your living room, bedroom, greenhouse and etc. from your smartphone.
- Temperature range: -4°F to 140°F (-20°C to 60°C)
- Temperature accuracy: +/-0.5°F (+/-0.3°C)
- Humidity range: 10% to 99%
- Humidity accuracy: +/- 2%
- Power source: 2 X AAA batteries (3V)
- 2.4GHZ wireless Bluetooth function, connect to mobile app via Bluetooth modul
- °F /°C button: press it to toggle the temperature display unit between °F and °C
- button: press it to turn on/off backlight
- Clock AM/ PM 1200 2400MOTUWETHFRSASU ;(APP )
Usage
Follow the simple steps below to set up your ThermoPro Bluetooth Thermometer/Hygrometer and remotely monitor the temperature and humidity of your living room, bedroom, greenhouse and etc. from your smartphone!
Step 1: Download and install the “ThermoPro Sensor” App. Scan the QR code
above, or search for “ThermoPro Sensor” on the Apple Store for IOS devices or
on the Google Play Store for Android devices. Download the App and install it
on your smartphone.
iPhone and iPad apps for IOS 9.0 and above.
Android app for versions 4.4 and above.
*Android users need to allow all the requests about this app from Android system.
Step 2: Enable Bluetooth on your smartphone under the smartphone Settings
section. If your smartphone has Bluetooth enabled, you can skip this step.
Step 3: Insert two AAA batteries into the battery compartment on the back
of the thermometer in correct polarity (+) and (-) as indicated.
Step 4: The temperature and humidity will be displayed on the screen and
the Bluetooth icon will be flashing at the top of the display. The Bluetooth
icon will be flashing for 2 minutes which indicates that the thermometer is
ready for pairing to your mobile phone.
Step 5: Launch ThermoPro Sensor APP and press to add a thermometer. The
thermometers will be shown on a list and select one to pair. Once pairing is
complete, the Bluetooth icon on the thermometer display will stop flashing and
the current temperature and humidity will show on the APP. If the Bluetooth
icon stops flashing and you haven’t finished the pairing, press and hold the
button for 2 seconds and the will be flashing again ready for pairing.
Done! Your ThermoPro Bluetooth Thermometer is ready for use! Any questions or need more help with setup, please feel free to contact us.
Declaration of Conformity
Hereby, the manufacturer declares that this product with the basic requirements and applicable regulations of the Radio Equipment Directive 2014/53/EU, the EMC Directive 2014/30/EU. The complete declaration of conformity can be found at: https://itronicsmall.com/eu-declaration-of- conformity/ complies
Disposal of the electronic appliance
This electronic appliance should not be disposed of with normal household
waste.
Dispose of the unit at an approved facility or at your local recycling center.
Please observe the current rules and regulations when disposing of the
appliance. Contact your local council if in doubt.
Limited One-Year Warranty
ThermoPro warrants this product to be free of defects in parts, materials and workmanship for a period of one year, from date of purchase. Should any repairs or servicing under this warranty be required, contact Customer Service by phone or email for instructions on how to pack and ship the product to ThermoPro. This warranty gives you specific legal rights and you may also have other rights which vary from state to state.
Customer service
Telephone: 1-877-515-7797 (USA &
Canada only)
Email: service@buythermopro.com
Hours: Weekdays 8:00 AM- 8:00 PM EST(USA & Canada only)
FCC Warning
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any inte rference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interferenceto radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.