VORTEC B08CT17L4J ANT+ and BLE Heart Rate Armband
- June 6, 2024
- VORTEC
Table of Contents
VORTEC B08CT17L4J ANT+ and BLE Heart Rate Armband
Product Introduction
Thank you for purchasing our ANT+ & BLE heart rate armband, this product is one of the heart rate monitors of our company, which transmits the real-time heart rate data through BLE or ANT+ to heart rate receiving device, sports and health App, helping you to manage your exercise intensity scientifically. This user manual will help you to use the product better, please keep it for reference.(This product is for sport purposes only and it is not meant to replace any medical advice).
Product Accessories
Basic Parameters
- Product size: 46.53614.5mm
- Weight: 20g
- Power: 90mAh Rechargeable lithium battery
- Battery life: 16 hours for continuous heart rate monitoring
- Working temperature: 0℃~40℃
- Transmission: ANT+, BLE
Function and Operation
Turn-on: Press the start-up button, the LED light will flash blue quickly
until the heart rate was found.
Turn-off : Hold the start-up button, The LED will flash red light and
vibrates, then enters the shutdown state.
Heart Rate Indicating
Max Heart Rate (MHR) = 180 (default)
| Zone | Color | Range (Default) |
|---|---|---|
| Zone 1 | Blue | Below 60% MHR |
| Zone 2 | Green | 61%~70% MHR |
| Zone 3 | Yellow | 71%~80% MHR |
| Zone 4 | Purple | 81% ~ 90% MHR |
| Zone 5 | Red | above 91% MHR |
Heart rate alarm: if the heart rate exceeds the maximum value, the sensor will vibrate 3 times continuously
Power
- Low Power Alert: LED flashes red and green alternately and vibrates once.
- Charging: LED flashes green and will stay on with green when fully charged.
Wearing: Wear an armband on the upper portion of the forearm. The sensor should be on the inside or top of the forearm. It should be worn snug enough not to move on your arm, but NOT so tight that it restricts arm circulation.
Initial Setup with BLE Smart Fitness Apps
- Set BLE on the device to ON.
- Find the Sensor Settings menu in the BLE Smart Fitness App.
- Connect this device armband by turning it on.
Initial Setup with BLE Smart devices
(Sports Watches, Fitness Equipment & GYM Team Training System.)
- From the device settings menu select “Add HR sensor”
- Connect this device armband by turning it on.
Compatible Apps
Endomondo, Wahoo, Runtastic, UA Run, Zwift
Applicable models
- iOS8.0 system version above, iPhone 5s or later.
- Any BLE 4.0 enabled Android device with Android 4.3 or later.
Disclaimer
- The information contained in this manual just for reference. The product described above may be subject to alteration owing to the manufacturer’s continuing research and development plans, without making an announcement in advance.
- We shall not bare any legal responsibility for any direct or indirect, accidental or special damages, losses and expenses arising from or in connection with this manual or the contained product.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>