ANT POWER Mini M90 Bluetooth Mini Stereo Radio Owner’s Manual
- June 6, 2024
- ANT POWER
Table of Contents
SPECIAL THANKS TO:
Melvin Davis Sr and David Rivera of the Boombox Museum
Tim Schafer Daniel Malakai Cabrera
PACKAGE CONTENTS:
(1) MINI M90 Stereo Radio
(1) Mini Cassette with Cassette Case
(1) USB-C Cable| (1) Service Manual
(4) XL Tuner Knobs
(1) Wired Remote
---|---
Left and Right Speakers: 3-inch speakers with 15 Watts per speaker (30W
Total).
Radio Band: Indicates that the current radio station is being received in
stereo. The Blue LED indicates that an FM Radiostation is playing.
Radio Tuning Knob : Adjust the Radio Frequency with this Tuning Knob.
Bass Control : Adjust the level of Bass with this Control Dial. Add the
XL Tuner Knobs for better grip.
Treble Control : Adjust the level of Treble with this Control Dial. Add
the XL Tuner Knobs for better grip.
Balance Control : Adjust the level of the sound coming from each speaker.
Add the XL Tuner Knobs for better grip.
Adjust the overall volume coming from the M90.
Note : in Bluetooth mode, you can also adjust the volume with your connected
device’s volume controls. Cassette Door. Holds the Mini Cassette Cassette
Eject Button: Opens the Cassette Door to get to the Mini Cassette.
Microphone : Built-in Microphone to talk into during Phone Calls.
Note : requires a mobile phone device be connected to the M90 via
Bluetooth.
Power Button: Turn the M90 MINI Stereo on and off.
Mode Button : Press this button to change between each input mode
(Bluetooth, Radio, AUX Line In).
Play/Pause Button : Press to toggle between playing and pausing the
audio. Note: this does not play/pause Radio mode Review Button: When in
Bluetooth or Media input mode, use this button to go back to the start of the
current song or to the previous audio track if you are already at the start.
Cue Button : Go forward to the next audio track.
Remote Input Jack : Mini Remote Plugs into this input jack.
PARTS LIST:
1. Left Speaker
2. Right Speaker
3. Radio Band
4. Microphone
5. Radio Tuning Knob
6. Bass Control
7. Treble Control
8. Balance Control
9. Volume Control| 10. Cassette Door
11. Cassette Eject Button
12. Power Button
13. Mode Button
14. Play/Pause Button
15. Review Button
16. Cue Button
17. Remote Input Jack
---|---
Telescopic Antennas : Extendable Antenna that helps with Radio Signal.
Handle: Handle to carry the M90 Mini. AUX Input Jack: use a 3.5mm AUX
cable to connect an AUX input devices such as an MP3 player.
LED Indicator : In Bluetooth mode, this indicator blinks Blue when the
M90 is available for pairing with a local device, solid blue when successfully
paired. (Also when SD card reader, USB A, or 3.5mm are activated) The LED will
be Red when the battery is charging, green when fully charged.
Micro SD Card Reader: Insert Micro SD Cards in this slot to play audio
tracks on the card.
USB-C Port: Charging port for the M90 Mini.
USB-A Port : Use this multi-function port to play audio tracks from USB
Flash drives, and to charge USB compatible devices.
Storage Compartment : Store your accessories in this compartment.
PARTS LIST:
1. Telescopic Antennas
2. Handle
3. AUX Input Jack
4. LED Indicator| 5. Micro SD Card Reader
6. USB-C Input Port
7. USB-A Input/Output Port
8. Cable Compartment
---|---
Remote Cable: Plug in the Mini Remote into the Remote with this cable.
Power Button : Turns the M90 Mini on and off.
Mode Button : Switch between different modes (Bluetooth, Radio, AUX Line
In).
Play/Pause Button: Plays and Pauses the music.
Review Button: Go back to the start of the song or to the previous song
if you are already at the start.
Cue Button : Go forward to the next song.
PARTS LIST:
1. Remote Cable
2. Power Button
3. Mode Button| 4. Play/Pause Button
5. Review Button
6. Cue Button
---|---
OPERATING TIPS:
TO CHARGE THE M90 MINI, PLUG THE INCLUDED USB C CABLE INTO A POWER OUTLET.• Use a USB outlet to charge.
-
While charging, the LED light will light up Red to inform you that it is still charging. It will turn green when fully charged.
TURN ON THE DEVICE AND IT WILL AUTOMATICALLY GO INTO BLUETOOTH PAIR MODE. -
Hold power button 2-3 seconds to turn on/off MINI M90.
-
Make sure your device has Bluetooth on, and pair it with “Min M90”.
HIT THE MODE BUTTON TO CYCLE THROUGH MODES: -
Bluetooth mode will play music (or calls) from your Bluetooth device.
-
Radio Mode will play the radio, use the Radio Tuning Knob to change channels.
-
AUX Line In Mode will play music through the AUX Input Jack.
WHILE IN BLUETOOTH MODE, YOU CAN RECEIVE PHONE CALLS GO THROUGH THE M90 MINI. -
The Play/Pause Button on the M90 Mini will answer and end calls.
TROUBLESHOOTING:
MY M90 MINI IS NOT PAIRING TO MY PHONE!
Make sure that your device’s Bluetooth mode is set to on to pair your M90
Mini.
MY M90 MINI IS PLAYING OTHER MUSIC NOT THE MUSIC OFF MY PHONE!
Make sure you are on the correct mode (Bluetooth). Also, check to make sure
you do not have an SD card or USB media device plugged in. The M90 will
automatically play from a media device if one is plugged in.
THE BLUETOOTH AUDIO QUALITY SOUNDS DIFFERENT WITH DIFFERENT APPS.
Different apps have different sound qualities (for example, Spotify will sound
different than YouTube).
THE BASS, TREBLE, AND BALANCE KNOBS ARE HARD TO GRAB.
Attach the XL Tuner Grips for easier use.
I CAN’T SWITCH BETWEEN MY MICRO SD CARD AND FLASH DRIVE WHEN THEY ARE BOTH
PLUGGED IN.
Only the first media device that is plugged in will play. For example, if
there is a Micro SD card when the Flash Drive is inserted, it will only play
the Micro SD card in the Media mode.
WILL I DRAIN THE BATTERY IF I LEAVE MY M90 MINI ON STANDBY?
M90 Mini will shut off after 10 minutes if left on standby.
WHEN I HIT THE REVIEW BUTTON TWICE ON THE MINI REMOTE, IT DOES NOT GO TO THE
PREVIOUS SONG.
You must hit the review button, wait for a second, and then hit it again to go
to the previous song.
TECHNICAL SPECS
Support Bluetooth Protocol| AVCTP1.0+AVRCP1.0+GAVDP+1.2+AVDTP.2
+AVDTP+1.0+A2DP+1.2+Hands-Free+Profile+1.5
+headset+Profile+V1.1
---|---
Test Range| -40°C+80°C
Wireless Transmission Range| 50M
Transmission Power| CLASS2+MAX+4dB
Sensitivity| [email protected]%+DER
Frequency Range| 2.4G-2.48GHz
Audio Signal to Noise Ratio| z75db
Speaker Output Power| 30W
Degree of Distortion| _cl%
USB Output| 5V/2.1A
Battery Capacity| 20000mAH
Type-C Input| 5V/2A; PD 18W(max.), 9V/2A
CAUTION:
CHOKING HAZARD on small parts (XL Tuner Knobs, Mini Cassette, Mini Cassette
Case, etc.). Not suitable for children under 3 years old. Opening and
tampering with the RepliTronics M90 Mini can result in damage to your product,
void of warranty, and could cause injuries. To clean: wipe gently with a soft
dry cloth. Never submerge your RepliTronics unit in water. Only charge with
power adapters that meet the device’s requirements. Store in a cool, dry place
when not in use.
WARRANTY:
All RepliTronics products come with a 100-day limited warranty and have been tested thoroughly to make sure they are at the highest level of dependability and compatibility. In case of a defect, New Wave Toys warrants to the original consumer purchaser that this product will be free from defects in material and workmanship for a period of 100 days from the date of your original purchase. If a warranty defect occurs, New Wave Toys, at their discretion, will repair or replace the product purchased at no charge or refund the original purchase price. If a replacement is necessary and your product is no longer available, a comparable product may be substituted at the sole discretion of New Wave Toys. This warranty does not cover normal wear and tear, accidental damage or misuse, modifications, or any other cause not related to either materials or workmanship.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Changes or
modifications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected
— Consult the dealer or an experienced radio/TV technician for help. This
device and its antenna(s) must not be co-located or operation in conjunction
with any other antenna or transmitter. Radiation Exposure Statement The device
has been evaluated to meet general RF exposure requirements. in portable
exposure conditions without restriction.
ISED statement: This device contains license-exempt transmitter(s)/receiver(s)
that comply with Innovation, Science, and Economic Development Canada’s
license-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference. (2) This device must accept any
interference, including interference that may cause undesired operation of the
device.
This device meets the exemption from the routine evaluation limits in section
2.5 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain
Canadian information on RF exposure and compliance. This equipment complies
with Canada’s radiation exposure limits set forth for an uncontrolled
environment.
The device has been evaluated to meet general RF exposure requirements. This
equipment should be installed and operated with a minimum distance of 0mm
between the radiator & your body.
CUSTOMER SERVICE INFORMATION: For service on any defective product under
the 100-day warranty policy, please contact Customer Service. New Wave Toys
reserves the right to require the return of the defective product and proof of
purchase.
Email:
[email protected]
Website: www.newwavetoys.com
Facebook: www.Facebook.com/NewWaveToys