Hangzhou Huacheng Network Technology IPC-CX2C-D Consumer Camera User Manual

Legal and Regulatory Information

Legal Considerations
This product can be regulated by laws that vary from country to country. Check the laws In your local region before using it.

Disclaimer

Every care has been taken in the preparation of this document. Please contact us through the following contact information for any inaccuracies or omissions. We shall not be held responsible for any technical or typographical errors and reserve the right to make changes to the product and manuals without prior notice. We make no warranty of any kind with regard to the material contained within this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. We shall not be liable or responsible for incidental or consequential damages I. connection with the furnishing, performance or use of this material. This product is only to be used for its intended purpose.

Intellectual Property Rights
We retain all intellectual property rights relating to technology embodied in the product described in this document.
Equipment Modifications
This equipment must be installed and used In strict accordance with the Instructions given In the user documentation. This equipment contains no user- serviceable components. Unauthorized equipment changes or modifications will invalidate all applicable regulatory certifications and approvals.
Regulatory Information
European Directives Compliance

This product complies with the applicable CE marking directives and standards:

• low voltage 4WD) Directive 2014/35/EU.
• Electromagnetic Compatibility IEMCI Directive 2014/30/EU.
• Restrictions of Hazardous Substances (RoHS) Directive 2011/65/EU and its amending Directive (EU) 2015/863.

CE-Electromagnetic Compatibility (EMC)
This digital equipment is compliant with Class B according to EN 55032.
CE-Safety
This product complies with IEC/EN/UL 62368-1, Audio/video, information and communication technology equipment – Part 1: Safety requirements and IEC/UL 60950-1: Safety of Information Technology Equipment.
Declaration of Conformity CE
(Only for the product has RF function)
Hereby, we declare that the radio equipment is compliant with Radio Equipment Directive (RED) 2014/53/EU.
Questo prodotto 6 conforme al le direttive e agli standard di marcatura CE applicabill:

• Besse tension. (LVD) Direttiva 2014/35/UE.
• Compatibilita elettromagnetka (EMC) Direttiva 2014/3001
• Restritione suite sostanze perkolose (RoHS) Direttiva 2011/65/UE

Declaration of Conformity UKCA

This device complies with UKCA relevant directives and standards.

• Electrical Equipment (Safety) Regulations 2016.
• Electromagnetic Compatibility Regulations 2016.
• The Restriction of the Use of Certain Hazardous Substances In Electrical and

Electronic Equipment Regulations 2012.
Hereby, we declare that the radio equipment is compliant with Radio Equipment Regulations 2017.

USA Regulatory Compliance FCC

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference r eceived , including interference that may cause undesired operation.

The attention that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This product generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur In a particular Installation. If this product does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment Into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF exposure warning
(Only for the product that has 12F communication function)

This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body.

Canada Regulatory Compliance

ICES-003

This Class B digital apparatus complies with Canadian KES-003.

Cet appareil numErique de la classe Best conforme a la norme NMB-003 du Canada.

This device complies with Industry Canada license-exempt R55 standard(s). Operation is subject to the following two conditions:

• This device may not cause interference, and
• This device must accept any Interference, Including I nterference that may cause undesired operation of the device.

RF exposure warning
(Only for the product that has RF communication function)
This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body.

Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent Isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.
The following safety guide is only applicable to products that support 5 GHz Wi-Fi.
The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.
Japan Regulatory Compliance
VCCI
These products comply with the requirements of VCCI Class B Information Technology
Equipment.
Batteries
Correct disposal of batteries in this product
This marking on the battery indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium, or lead above the reference levels in Directive 2006/66/EC and its amending Directive 2013/56/EU. If batteries are not properly disposed of, these substances can cause harm to human health or the environment.

CAUTION
Do not ingest the battery. Chemical Burn Hazard.
This product contains a coin cell battery. If the coin cell battery is swallowed, it can cause severe Internal bums in Just 2 hours and can lead to death.
Keep new and used batteries away from children.
If the battery compartment does not close securely, stop using the product and keep it away from children.
If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
CAUTION
Risk of explosion if the battery is replaced by an incorrect type.
Do not throw or immerse into water, heat to more than 100 °C (212 °F), repair or disassemble, leave in an extremely low air pressure environment or extremely high-temperature environment, crush, puncture, cut or incinerate.
Dispose of the battery as required by local ordinances or regulations.

Safety

The product complies with IEC/UL W950-1, Information Technology Equipment -Safety – Part 1: General Requirements; or complies with IEC/EN/UL 62368.1, Audio/video, information and communication technology equipment – Part 1: Safety requirements.
If the power supply to the product is from an external power adaptor without connecting to AC Mains, and the product is not shipped with a power adaptor, customers are required to use the external power adaptor that must fulfill the requirements for Safety Extra Low Voltage (SELV) and Limited Power Source (IPS).

Waste Electrical and Electronic Equipment (WEEE) statements Disposal and Recycling

When this product has reached the end of its useful life, dispose of it according to local laws and regulations. For information about your nearest designated collection point, contact your local authority responsible for waste disposal. In accordance with local legislation, penalties may be applicable for incorrect disposal of this waste.
This symbol means that the product shall not be disposed of together with household or commercial waste. Directive  2012/19/EU on waste electrical and electronic equipment (WEEE) is applicable in the European Union member states. To prevent potential harm to human health and the environment, the product must be disposed of in an approved and environmentally safe recycling process. For information about your nearest designated collection point, contact your local authority responsible for waste disposal. Businesses should contact the product supplier for information about how to dispose of this product correctly.

Privacy Protection Notice

As the device user or possible data controller, you might collect personal data of others such as face, fingerprints, car plate number, Email address, phone number, CPS and so on. You need to be in compliance with the local privacy protection laws and regulations to protect the legitimate rights and interests of other people by implementing measures, including but not limited to providing clear and visible identification to Inform data subject the existence of a surveillance area and providing related contact.

About the Manual

• The manual is for reference only. If there is an inconsistency between the manual and the actual product, the actual product shall prevail.
• We are not liable for any loss caused by the operations that do not comply with the manual.
• The manual would be updated according to the latest laws and regulations of related jurisdictions. For detailed information, refer to the paper manual, CD-ROM, QR code or our official website. If there is an inconsistency between the paper manual and the electronic version, the electronic version shall prevail.
• All the designs and software are subject to change without prior written notice. The product updates might cause some differences between the actual product and the manual. Please contact customer service for the latest program and supplementary documentation.
• There still might be a deviation in technical data, functions and operations description, or errors in print. If there is any doubt or dispute, we reserve the right of final explanation.
• Upgrade the reader software or try other mainstream reader software if the manual (in PDF format) cannot be opened.
• All trademarks, registered trademarks, and company names In the manual are the properties of their respective owners.
•  Please visit our website, contact the supplier or customer service if there is any problem occurring when using the device.
•  If there is any uncertainty or controversy, we reserve the right of final explanation.

Support

• Should you require any technical assistance, please contact your distributor. If your questions cannot be answered immediately, your distributor will forward your queries through the appropriate channels to ensure a rapid response.

Important Safeguards and Warnings

This Chapter describes the contents covering proper handling of the device, hazard prevention, and prevention of property damage. Read these contents carefully before using the device, comply with them when using them, and keep it well for future reference.

Safety Instructions

The following categorized signal words with defined meanings might appear in the Guide.

result in death or serious injury.
WARNING| Indicates a medium or low potential hazard which, if not avoided, could result in slight or moderate Injury.
CAUTION| This indicates a potential risk which, if not avoided, could result in property damage, data loss, lower performance, or unpredictable result.
TIPS| Provides methods to help you solve a problem or save you time.
NOTE| Provides additional information as the emphasis and supplement to the text.

Safety Requirement

• Abide by local electrical safety standards to ensure that the voltage is stable and complies with the power supply requirement of the device.
• Transport, use, and store the device under the allowed humidity and temperature conditions. Refer to the corresponding technical specifications of the device for specific working temperature and humidity.
• Do not place the device In a location exposed to dampness, dust, extreme hot or cold, strong electronic radiation, or unstable lighting conditions.
• Do not install the device in a place near the heat source, such as a radiator, heater, furnace, or another heat-generating device to avoid fire.
• Prevent liquid from flowing into the device to avoid damage to internal components.
• Install the device horizontally or install in a stable place to prevent it from falling.
• Install the device in a well-ventilated place, and do not block the ventilation of the device.
• Do not disassemble the device arbitrarily.
• Avoid heavy stress, violent vibration, and soaking during transportation, storage, and Installation. The complete package is necessary during transportation.
• Use the factory package or the equivalent for transportation.

Battery

Low battery power affects the operation of the RTC, causing it to reset at every power-up. When the battery needs replacing, a log message will appear in the product’s server report. For more information about the server report, see the product’s setup pages or contact our support.

WARNING

• Risk of explosion if the battery is incorrectly replaced.
• Replace only with an identical battery or a battery which is recommended by us.
• Dispose of used batteries according to local regulations or the battery manufacturer’s instructions.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>