codejunkie Go-tcha Clip for Pokémon Go User Guide
- June 6, 2024
- codejunkie
Table of Contents
User Guide
Thank you for purchasing the Go-tcha Clip for Pokémon Go!
Enjoy Pokémon GO on the move without looking at your smartphone!
What’s In The Box?
In your Go-tcha Clip for Pokémon Go box you should receive:
- x1 Go-tcha Clip USB device
- x1 Go-tcha Clip Case
- x1 Magnetic USB charger cable
Connecting Your Go-tcha Clip
To connect your Go-tcha Clip to the Pokémon App:
- Open the Pokémon GO App
- Touch the Main Menu
- Touch Settings
- Touch `Pokémon GO Plus’
- Press the button on the Go-tcha Clip to make it discoverable to the Pokémon Go App
- Touch your `Pokémon GO Plus’ under Available Devices list to connect.
Using Your Go-tcha Clip – Manual Catch
- Go-tcha Clip will vibrate and animate the screen to show a new/duplicate Pokémon is near
- Press the Go-tcha Clip button/screen to catch the Pokémon
- Go-tcha Clip will vibrate and animate the screen to show a successful/unsuccessful catch
- Go-tcha Clip will vibrate and animate the screen to show when a Pokéstop is in range
- Press the Go-tcha Clip button to retrieve items from a Pokéstop
- Go-tcha Clip will vibrate and animate the screen to show it has successfully/unsuccessfully collected the items and how many items it has collected
See `Go-tcha Clip Screens’ on pages for a complete guide to the screen animation alerts.
Using Your Go-tcha Clip- Auto Catch
To turn the Auto-catch’ function on, press the Go-tcha Clip button until Auto-catch ON’ is selected.
If you have Auto Catch on:
- Go-tcha Clip will vibrate and animate the screen to show a successful/unsuccessful catch
- Go-tcha Clip will vibrate and animate the screen to show it has successfully/unsuccessfully collected the items and how many items it has collected at a Pokéstop
To turnAuto-catch’ off, press and hold the Go-tcha Clip button untilAuto- catch OFF’ is selected.
Charging Your Go-tcha Clip
The Go-tcha Clip charges via a magnetic USB cable. Simply remove the Go-tcha
Clip unit from the clip case, connect the magnetic cable and connect the other
end to a USB power source. The cable will only connect one way around – you
will feel the magnets indicating the correct orientation as you position the
connector. Simply return the Go-tcha Clip to the case when fully charged.
A full charge takes approx. 1 hour and lasts for approx. 12 hours with
continuous use. Standby time is approx. 48 hours.
Once connected you can check that your Go-tcha is charging by pressing the
screen button. The charging animation will appear to confirm that the Go-tcha
is charging. If there is another Go-tcha animation running, then wait for the
animation to stop and the screen is blank – now press the screen button to
confirm the charging animation is displayed.
Go-tcha Clip Screens
THIS PRODUCT IS NOT SPONSORED, ENDORSED, OR APPROVED BY THE POKÉMON COMPANY
OR NIANTIC.
Device requires Bluetooth low-energy compatible smartphone with Pokémon GO app
installed. Compatible with iPhones using iOS Ver. 12 onwards installed.
Compatible with Android devices with 2 GB RAM or more, Bluetooth Smart
(Bluetooth Ver. 4.0 or higher) capability, and Android Ver. 4.46.0 installed.
Technical Support
Before contacting Datel’s customer service department, please ensure that you
have read through and understood the information in this manual/guide. If you
contact support, please ensure that you have information on when and where you
purchased this product to hand.
Datel Customer Services Europe
Customers Services, Datel Ltd,
Stafford Road, Stone, Staffordshire,
ST15 0DG.
UNITED KINGDOM
Web: https://support.codejunkies.com
© 2021 Datel Ltd. PowerSaves is a trademark of Datel Ltd. Pokémon is a trademark or registered Trademark of the POKÉMON COMPANY. All other trademarks are the property of their respective owners. Go-tcha Clip for Pokémon Go is a 100% unofficial product and is NOT sponsored, endorsed or approved by NINTENDO, nor any games developer or publisher.