otbeat Burn Heart Rate Monitor User Guide: How to Wear and Charge
- June 6, 2024
- otbeat
Table of Contents
The otbeat Burn Heart Rate Monitor User Guide provides comprehensive instructions on how to use the device effectively. The guide includes a quick start guide, technical specifications, and instructions for getting started, downloading the Orangetheory app, charging the device, proper placement, pairing the device, LED guide, and caring for the device. The guide emphasizes the importance of charging the device fully before pairing it with the app to ensure optimal performance. It also provides detailed instructions on how to charge the device and the LED indication for charging. The guide also highlights the proper placement of the device to transmit accurate data and how to pair it with the Orangetheory app. Additionally, it offers an LED guide that explains the various LED indications for heart rate detection, Bluetooth connection state, and battery state. Lastly, the guide provides instructions on how to care for the device to ensure accurate readings and prevent damage. Overall, this user guide is an essential resource for anyone who wants to use the otbeat Burn Heart Rate Monitor effectively.
Quick Start Guide
OTbeat Burn Quick Start Guide
Instructions for:
- Getting Started
- Downloading the Orangetheory App
- Charging Device
- Proper Placement
- Pairing Device
- LED Guide
- Caring for Device
- Technical Specifications
Getting Started:
- Included in packaging: OTbeat Burn, SM band, LG band, & USB cord
- Remove OTbeat Burn from packaging
- Connect USB cord into charging port of the device to wake the device from manufacturing sleep mode
- The LED light will appear after a few seconds
Downloading the Orangetheory App:
Note: Fully charge the device before attempting to pair for the first time.
OTbeat Burn – Charging Device
Charging Device:
- Open rubber port cover on the back of the device
- Plugin mini-USB connector into a device port
- Plugin regular USB connector into charging block (not provided)
- Plug-in charging block into a wall outlet
Device can be connected directly to a computer USB port for charging.
Note: Charging time will vary due to differences in voltage between wall
outlet and computer.
The battery is fully charged when Green LED is continuously on
During charging: Red LED light will blink slowly
LED indication for charging is on front of the device
OTbeat Burn – Proper Placement
Proper Placement:
To transmit accurate data from your device:
-
Fasten the device snugly in one of the below placement options
Note: Ideal placement is above or below the elbow. -
Wear device below, and not directly on top, of wrist bone* or elbow
-
The optical sensor on the back should make good contact with the skin
*For placement on wrist, measure two fingers above the wrist bone
OTbeat Burn – Pairing Device
Pairing Device:
-
Once OTbeat Burn is fully charged, double click the center of the Splat to power ON the device
Set power ON: Short button press (Blue LED blinks for 5 seconds)
Set power OFF: Long button press (Red LED light blinks quickly for 5 seconds then turns off) -
Launch the Settings app on your mobile device
-
Ensure your Bluetooth settings are on
-
Open the Orangetheory app on a mobile phone.
-
Use the Orangetheory app to search for a device
*Once the device appears, OTbeat Burn is successfully connected to an app
OTbeat Burn – LED Guide
LED Guide:
Heart Rate Detection LED Indication:
Alternating BLUE and GREEN: Detecting heart rate
Alternating BLUE and RED: No heart rate detected
Blinking GREEN: Heart rate detected
Blinking ORANGE: Heart rate zones are changing
Bluetooth Connection State:
Blue LED blinks for 5 seconds: After turning on the unit
Blue LED continuously on for 5 seconds: Connected
Green LED continuously on: Updating firmware
Battery LED Light
During Charging:
Red LED blinks slowly: Charging
Green LED continuously on: Battery full
Battery State:
Red LED blinks three times: Low battery at <15% (repeat every
5 min. until reach critical level)
Red LED continuously on for 2 sec: Device powering off
OTbeat Burn – Caring for Device
Caring for Device:
- To ensure accurate readings, clean the sensors with a soft cloth after use
- OTbeat Burn unit and strap are waterproof to IP67 specifications and can be easily cleaned with mild soap and cool water
- Use a cotton swab and rubbing alcohol to clean the USB charging contacts when necessary. Do NOT contact the USB charging port
- Do not use any abrasive chemicals to clean the OTbeat Burn unit, sensor, or strap. This will cause permanent damage
OTbeat Burn – Technical Specifications
Technical Specifications:
Feature
|
Description
---|---
Functions| heart rate detection and transmission (ANT+ or Bluetooth 5.0),
battery low alert
Heart Rate Range| 30 to 220 BPM in 1 BPM resolution
Heart Rate Accuracy| +/-5 BPM
Transmission| ANT+ /BLE
Power Supply| 3.8V Li-ion Polymer rechargeable battery
ANT+ or BLE Transmission Distance| 15 Meters
Battery Lifetime (PPG&BLE always on)| Up to 24 hours of continuous Detection
Water Resistance Level| IP67
Storage Temperature| -20 to +60◦C
Operating Temperature| 0 to +40C
Memory capacity| 6 hours detection
FAQ’s
What is included in the packaging of the otbeat Burn Heart Rate Monitor?
The otbeat Burn Heart Rate Monitor package includes the device, SM band, LG band, and USB cord.
How do I charge the otbeat Burn Heart Rate Monitor?
To charge the otbeat Burn Heart Rate Monitor, open the rubber port cover on the back of the device and plug in the mini-USB connector into a device port. Then, plug in the regular USB connector into a charging block (not provided) and plug in the charging block into a wall outlet. The device can also be connected directly to a computer USB port for charging.
How do I know when the otbeat Burn Heart Rate Monitor is fully charged?
The battery is fully charged when the Green LED is continuously on. During charging, the Red LED light will blink slowly. The LED indication for charging is on the front of the device.
What is the proper placement for the otbeat Burn Heart Rate Monitor?
To transmit accurate data from your device, fasten the device snugly below, and not directly on top, of wrist bone or elbow. The ideal placement is above or below the elbow. The optical sensor on the back should make good contact with the skin.
How do I pair my otbeat Burn Heart Rate Monitor with the Orangetheory app?
Once the otbeat Burn Heart Rate Monitor is fully charged, double click the center of the Splat to power ON the device. Launch the Settings app on your mobile device and ensure your Bluetooth settings are on. Open the Orangetheory app on a mobile phone and use it to search for a device. Once the device appears, the otbeat Burn Heart Rate Monitor is successfully connected to an app.
How do I care for my otbeat Burn Heart Rate Monitor?
To ensure accurate readings, clean the sensors with a soft cloth after use. The otbeat Burn Heart Rate Monitor unit and strap are waterproof to IP67 specifications and can be easily cleaned with mild soap and cool water. Use a cotton swab and rubbing alcohol to clean the USB charging contacts when necessary. Do not use any abrasive chemicals to clean the otbeat Burn Heart Rate Monitor unit, sensor, or strap. This will cause permanent damage.
What is the battery lifetime of the otbeat Burn Heart Rate Monitor?
The battery lifetime of the otbeat Burn Heart Rate Monitor is up to 24 hours of continuous detection.
What is the heart rate range of the otbeat Burn Heart Rate Monitor?
The heart rate range of the otbeat Burn Heart Rate Monitor is 30 to 220 BPM in 1 BPM resolution.
What is the heart rate accuracy of the otbeat Burn Heart Rate Monitor?
The heart rate accuracy of the otbeat Burn Heart Rate Monitor is +/-5 BPM.
What is the transmission distance of the otbeat Burn Heart Rate Monitor?
The transmission distance of the otbeat Burn Heart Rate Monitor is 15 meters for ANT+ or BLE transmission.
For more information visit orangetheory.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>