BONIDY A10 Active Noise Cancellation Earbuds User Guide
- June 6, 2024
- BONIDY
Table of Contents
BONIDY A10 Active Noise Cancellation Earbuds
Package content
Overview
Earbuds
Charging Case
Fitting
- Select eartips of the most fitting size provided{large,medium,small).
- Plesase install the fitting eartips on the earphone.
- Wear the earbuds.
Pick up the earbud accordingly{R/L).
Instruction
-
Initial Use
Please put the earphone into the charging box to charge. -
Pairing
Open the device’s Bluetooth to search “AlO”and hear the “dong dong” sound after to connect.
Either earbud can be used separtely.
The earbuds can be automatically re-connected to the last connected devices.
Technical Soecifiction
Item Number AlO
Bluetooth Version BT 5.2
Speaker diameter 12mm
Wireless Range lOM
Sensitivity 117dB±3dB
Frequency response Range 20Hz-20KHz
lnpednance 280
Battery Type Lithium ion Battery
Earbuds Capacity 3.7V/40mAh
Charging box battery capacity 3.7V/520mAh
Palytime ANC ON 5.Shrs,ANC OFF 6.Shrs
Playtime with charging case ANC ON 25 hrs,ANC OFF 30hrs
Charging Time Charging case 2.5hrs,earbudsl.2hrs
Battery life:
Due to different systerms,audio formats,personal useage habits{such as
volume)of mobile phones and other devices,the battery life may vary for the
specific situation
Operation
ANC Features
Charging
Two ways to charge charging case
Connect charging case with USB-C Cable to charge
Charge the charging box, Orange light is on during the charging process of the charging box.The green light is on when the charger is full
Do not put the earbuds in the charging case whenthe earbuds are wet.
FAQ
-
The earbuds do not turn on.
Pis confirm the earbuds have power first,if not charged pls charge up and the power on. -
Unsuccessful Bluetoth Pairing.
Make sure the earbuds are turned on and in pairing state ,the pairing distance is kept within lm. -
Some Bluetooth Devices Require a pairing Password.
Please enter”0000″ -
Automatically Re-connect.
When power on,it will automatically re-connect to the last connected device. -
How long will it turn off automatically when it doesn’t connect?
The earbuds will automatically turn off after 5 mins if it doesn’t connect with other Bluetooth devices. -
When the earbuds cannot be charged.
Pis wipe the earbuds metal charging spots. -
Why I can’t open ANC Mode?
Pls press the right earbuds to turn on the ANC Mode.
Note
-
This product contains a built-in lithium battery. Do not expose the product to strong sunlight or fire or it might explode. Dispose of the battery according to local regulations. Do not dispose of it as domestic waste.
-
Do not remove or replace the product battery unless doing so is specified in the User Manual or in the Quick Start Guide, or you might damage the product.
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT1YPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. -
Do not disassemble or refit the earphone for any reason as you may damage it or void the warranty.
-
Avoid contact with liquid to avoid serious damage to the earphone.
The manufacturer does not cover water damage. -
Avoid temperatures above 75 degrees and below minus 40 degrees.
-
Keep the indicator light away from children’s and animals’ eyes.
-
Do not use this product during thunderstorms to avoid electric shocks.
CE Note
Model number AlO
Operation Temperature -10″C to+45″C
Storage Temperature -20″C to +65″C
This device is a portable device. To comply with RF exposure requirements, a minimum separation distance of 0cm must be maintained between the user’s head and ear, including the antenna. Use only the supplied or an approved antenna.
This device in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. All essential radio test suites have been carried out.
- CAUTION : RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT 1YPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS;
- The device complies with RF specifications when the device used at 0mm from your bodyo Declaration of Conformity
This device is a 2.4 GHz wideband transmission system, intended for use in all
EU member states and EFTA countries.
RF working band (BR+EDR) 2.402-2.480 GHz Maximum output RF power(BR+EDR) 7dBm
RF working band (BLE) 2.402-2.480 GHz Maximum output RF power (BLE) -4 dBm
Listen at reasonable volumes for reasonable periods of time. Excessive sound pressure from earphones and headphones can cause hearing loss.
Aftersales policy
Warranty period: one year warranty from the date of purchase.
The name and content of hazardous substances in the product
Hazardous substances or elements
| Part Name | Pb | Hg | Cd | Cr(VI) | PBB | PBDE |
|---|
Circuit template
|
0
|
0
|
0
|
0
|
0
|
0
Plastic Parts| 0| 0| 0| 0| 0| 0
Trumpet| 0| 0| 0| 0| 0| 0
Battery| 0| 0| 0| 0| 0| 0
Appendix| 0| 0| 0| 0| 0| 0
FCC ID：2A3N5-A10
Federal Communications Commission (FCC) Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following twoconditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide Reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one ormore of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications made to this device not expressly approved by Ancsonic (chongqing) Electronic Science & Technology Co., Ltd may void the FCC authorization to operate this device.Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
RF exposure statement:
The device compliance RF exposure requirement and can installed and used
without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>