Bewhere BeMini B3-MIOT-NA Indoor Outdoor Asset Tracker User Manual

: June 6, 2024
: Bewhere

Table of Contents

Features
Benefits
BeMini Technical Specifications
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BeMini B3-MIOT-NA Indoor Outdoor Asset Tracker
User Manual

BeWhere BeMini (B3-MIOT-NA) is a small form factor asset tracker that utilizes the latest in LTE-M/NB Cellular technology. It has very low power consumption and long battery life so you can track, monitor, and manage a wide variety of durable and perishable assets like never before.
The BeMini is rechargeable with mini-USB, features sensors like temperature and light along with multiple location modules to enhance indoor location tracking. The BeMini smaller form factor is ideal for tracking smaller assets both indoor and outdoor.

Features

Available on the following Radio Access
Technologies: B3-MIOT-GA (M1 / NB1/ NB2)
Rechargeable with mini-USB (included)
Configurable alerting
Motion tracking, triggering updates
Outdoor Location: GNSS (GPS, BeiDou, Galileo, GLONASS, and QZSS)
Indoor Location: Wi-Fi / BLE 5.2
IP67 Rugged and Dust / Water-proof enclosure
On-board sensors
– Temperature
– Humidity
– Pressure
– Light
– Accelerometer
– Buzzer

Benefits

Ultra-low-power platform
Low device cost
Low deployment cost
No reader needed
Full coverage (indoor and rural areas)

BeMini Technical Specifications

General

Communication Battery| LTE CAT M1 / CAT NB1/NB2
Operating Voltage: 3.35 – 4.35V±0.02V
Built-in rechargeable battery (Lithium-Polymer). Rechargeable via a Micro-USB cable.
Charge: 0℃~ +45℃ In-use: -30℃~ +60℃
Location
GPS Receiver| Gen9 VT of Qualcomm (GPS, GLONASS, BeiDou, Galileo, and QZSS). Tracking & Navigation: –157
dBm Cold start: –146 dBm Hot start: –157 dBm
Wi-Fi Receiver| For Micro-location purposes only. Frequency: 2.4 GHz to 2.4835 GHz, Sensitivity: – 70 dBm
Cellular| Sensor Operation Range (full accuracy)
Data| LTE CAT M1 Packet Data (CoAP/UDP)
CAT NB1/NB2 Packet Data CoAP/LwM2M/UDP| Environmental| Temperature [ -30, +60;

Absolute accuracy ±0.5 °C ]

Humidity [ Absolute

accuracy ±3 %RH ]

Pressure [ 300…1100 hPa,

Absolute accuracy ±1 hPa ]

Operating Bands and Carriers| North America & Europe: Cat M1 /NB1(2)
M1: LTE-FDD: B2/B3/B4/B5/B8/B12/B20
NB1/NB2: LTE-FDD: B2/B3/B4/B5/B8/B12/B20 (AT&T, Bell, T-Mobile, Europe)| 3-Axis

Accelerometer

Compliance Statement

A separation distance of 20 cm must be maintained between this device and nearby persons.
FCC statement: “This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.”
“Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.”
IC statement:
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s).
Operation is subject to the following two conditions:

This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device.