iDREAMING MK-01 Wireless Music Sleep Mask User Manual
- June 6, 2024
- iDREAMING
Table of Contents
GET HEP WITH iDREAMINGSUPPORT
PACKAGE CONTENT
Important Safety Information
1. Please read the product manual carefully before using the eye mask for the
first time
2. If you need to clean DREAMING:
Step 1 Please carefully untie and take out the DREAMING Control Panel as shown
in the picture.
Step 2: After washing and drying, please place the DREAMING control panel. Put it into the eyecup and close it tightly.
| ON/OF | WAVE CONTROL | WAVE MODE |
|---|---|---|
| PARING | CHARGE | DEVICE NAME |
| --- | --- | --- |
Description of Binaural beats
Consists of two different but coordinated sounds, which emit only the brain. The “hearing” sound makes people calm, relaxed, and even sleep status.
Binaural beat sound Sleep / meditation / relax mode
How to choose Bluetooth music. This product provides three different frequency bands of the binaural beat sound Sleep/meditation/Relax, you can choose the sound you like, as long as you can feel comfortable is the best. The sound is not necessarily limited to a certain sound mode.
The slowest and strongest band is related to dreamless deep sleep
and healing.
Related to slow wave sleep and extreme relaxation. Affecting people’s “involuntary” attitudes, Expectations, beliefs, behaviors, etc. are t he so- called hypnosis and meditation.
Make people relaxed and conscious. Brain waves related to working memory, calculations, and thought ordering
Built-in gentle white noise ocean wave sound
The gentle white noise ocean wave sound will automatically turn on after turning on. If there is no Bluetooth, it will continue to play. You can also choose the three modes of binaural beat sound: Sleep/meditation/ relax. If connected to play Bluetooth music, it will automatically jump to Bluetooth music, Bluetooth music stops and it will automatically switch back to a gentle white noise ocean wave sound.
How to choose music
It is best to find music with a playback quality sufficient to cover the low-
frequency range. Next, it is best to play soothing and relaxing music. Find a
comfortable position, either sitting or lying down.
Then put on the eye mask, you can start playing binaural beat music, First
focus on breathing, then, take a deep breath and listen. in case. If any
thoughts enter your mind, don’t be distracted.
Be conscious not to be angry or depressed, if it happens, let it go. Make sure
that the selected track is at least 15 minutes in length because it takes 7
minutes for the brain to synchronize with the audio.
Be patient, it may take a few more tries before you can start from it benefit or perceive a change in mental state.
Safety reminder
- The control panel cannot be cleaned.
- The eye mask can be cleaned (hand washes, dry).
- When not in use, please turn off dreaming to extend battery life.
- Please store dreaming in a dark place at room temperature.
- When operating machinery or performing other tasks that require concentration, Please do not use this product.
- To avoid damage, do not disassemble electronic components.
- Please do not use this product in a high temperature and high humidity environment.
- Please do not pierce or throw this product.
Use reminders
If there is light leakage in the eye mask, how to deal with it:
Please take off the eye mask, fold it slightly as shown in the picture, and
then put it on again. Adjust the Velcro to a suitable position.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible or compliance
could void the user’s authority to operate the equipment .
NOTE: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction
FCC ID: 2A3ML-MK-01
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>