2 MP PTZ Wi-Fi IP Camera Imou Ranger 2С User Guide

Quick Start Guide

www.imoulife.com

Welcome

Thank you for choosing Imou. We are devoted to providing you easy smart home products. If you have problems using the product, please contact our service team before retuming your product.
Our service mail: [email protected]

Detailed installation instructions & videos, frequently asked questions can be found at: imoulife.com/support/help or scan this QR code to help page.

http://www.imoulife.com/web/support/help

Package Content

Camera Introduction

Note: Press and hold the reset button for 10 s to reset the camera.

The discription of the LED indicator is included in the following table.

• Rebooting after reset
Red light on| • Booting
• Device malfunction
Green light flashing| • Waiting for network
Green light on| • Operating properly
Red light flashing| • Network connection failed
Green and red light flashing alternately| • Firmware updating

http://mobile.easy4ipcloud.com/imou/detect.html

Tips

To ensure the best possible wireless performance, please make sure that there are no obstacles and electromagnetic interference between the camera and router.

Ceiling Mounting (Optional)

Troubleshooting

are within range of your Wi-Fi router.
• Make sure that the LED indicator on the camera is flashing green.
How to find the camera Wi-Fi password| It is the safety code on the device label.
No picture or device is online| • Make sure that the LED indicator on the camera is flashing green. See “LED Status” section for details if otherwise.
• Make sure that the camera is properly connected to power using the included USB power adapter. • • • Reposition the camera, router, or both to improve signal strength.
Picture is not clear| • Check the camera lens for dirt, dust, and spider webs. Clean the lens with a soft, clean cloth.
• Remove the vinyl cover on the camera lens.
No audio| • Make sure that audio function on camera is turned on.
• Make sure that audio is turned up on viewing device.
Human detection does not work| Make sure that you have enabled Human Detection in the Device Settings interface of Imou Life App.
Camera stuck downwards| Check Privacy Mode setting on Imou Life App.
Fail to scan OR code| • Clean the camera lens of your smart phone.
• Make sure that there is enough light on the OR code.
• Do not hold the OR code too close to the camera.

1.2.51.32.152.10-001
V2.0.0

Legal and Regulatory Information

Legal Considerations
Video surveillance can be requiated laws that vary from country to country. Check the laws in your local region atone using the Product id surveillance
purposes,

Disclaimer
Every care has been taken in the preparation of this document. Please inform your nearest Dahua office of any inaccuracies or omissions. Dahua Technology shall not be held responsible for any technical or ‘typographical errors and reserves the right to make changes to the product and manuals without prior notice. Dahua technology makes no warranty of any kind with regard to the material contained within this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Dahua Technology shall not be liable or responsible for incidental or consequential damages in connection with the furnishing, performance or use of this material. This product is only to be used for its intended purpose.

Intellectual Property Rights
Dahua Technol retains all intellectual pro-rights relating to technology: embodied in the product described in this document.

Equipment Modifications
This equipment must be installed and used in strict accordance with the instructions given in the user documentation. This equipment contains no user- serviceable components. Unauthorized equipment changes or modifications will invalidate all applicable regulatory certifications and approvals.

Trademark Acknowledgments
are registered trademarks or trademark applications of Dahua Technology in various jurisdictions. All other
company names and products are trademarks or registered trademarks of their respective companies.

Regulatory Information
European Directives Compliance

This product complies with the applicable CE marking directives and standards.

• Low Voltage (LVD) Directive 201 4/35/EU.
• Electromagnetic Compatibility (EMC) Directive 2014/30/EU.
• Restrictions of Hazardous Substances (RoHS) Directive 2011/65/EU and its amending Directive (EU) 2015/863.

A copy of the original declaration of conformity may be obtained from Dahua Technology.
The most up to date copy of the signed EU Declaration of Conformity (DoC) can be downloaded from: www.dahuasecurity.com/support/notice/

CE-Electromagnetic Compatibility (EMC)
This digital equipment is compliant with Class B according to EN 55032,

CE-Safety
This product complies with IEC/EN/UL 60950-1 or IEC/EN/UL 62368-1, Safety of Information Technology Equipment.

Declaration of Conformity CE
(Only for the product has RF function)
Hereby, Dahua Technology declares that the radio equipment is compliant with Rado Equipment Directive (RED) 2014/53/EU. The ful ted of the EU declaration of conformity is avaiable at the following internet address: www.dahuasecurity.com/support/notice/

USA Regulatory Compliance
FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation.

Attention that changes or modification not expressly approved the party responsible for compliance could void the Sore eathorty to OY rete the equipment.

Note: This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to pinyice reasonable Protection against harmful interference in a residential installation. product generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, May cause harmful interference to radio communications. However, there is no © guarantee that interference will not occur in a particular installation. If this product does cause harmful interference to radio or television reception, ich can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outiet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
  FCC SDOC Statement can be downloaded from: https://us.dahuasecurity.com/support/notices/

RF exposure warning (Only for the product has RF communication function)

This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body.

Canada Regulatory Compliance
ICES-003
This Class B digital apparatus complies with Canadian ICES-003.
This device complies with Industry Canada licence-exempt RSS standard(s)
Operation is subject to the following two conditions:

1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired cperation of the device.

RF exposure warning (Only for the product has RF communication function)

This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body.

Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.ir.p.) is mot more than that necessary for successful communication.

Japan Keguiatory Compilance
VCCI
These Porkae comply with the requirements of VCCI Class B Information Technol Equipment.

Batteries
Correct disposal of batteries in this product

This marking on the battery indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd, or Pb indicate that the battery contains mercury, cadmium, or lead above the reference levels in Directive 2006/66/EC and its amending Directive 2013/56/EU. If batteries are not properly disposed of, these substances can cause harm to human health or the environment.

CAUTION
Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries acorn to the instructions.

Safety
The product complies with IEC/EN/UL 60950-1, Information Technology Equipment – satety Part 1: General Requirements: or complies with IEC/EN/UL 62368-1, Audicrvideo, information and communication technology equipment Part 1: Safety requirements.

If the power supply to the Product is from external power adaptor without connecting to AC Mains, and the product is not shipped with power adaptor, customers are required to use the external Bee, adaptor that must fulfill the requirements for Safety Extra Low Voltage (SELV) and Limited Power Source (LPS).

Waste Electrical and Electronic Equipment (WEEE) statements
Disposal and Recycling

When this product has reached the end of its useful life, dispose of it according to local laws and regulations. For information about your nearest designs collection point, contact your local authority responsible for waste disposal. in accordance with local legislation, penalties may be applicable for incorrect disposal of this waste.

This symbol means that the product shall not be disposed of together with household or commercial waste. Directive 2012/19/EU on waste electrical and electronic equipment (WEEE) is applicable in the European Union member states. To prevent potential harm to human health and the environment, the product must be disposed of in an approved and environmentally safe recycling process: For information about your nearest designated collection point, con your local authority responsible for waste disposal. Businesses should contact the product supplier for information about how to dispose of this product correctly.

Privacy Protection Notice

As the device user or data controller, you might collect personal data of others such as face, fingerprints, car plate number, Email address, phone number, GPS, and so on. You heed to be in compliance with the local privacy protection laws and regulations to protect the legitimate rigs and interests of other people by implementing measures, including but not Limited to providing clear and visible identification to inform data subject the existence of surveillance area and Providing related contact.

About the Manual

• The manual is for reference only. If there is inconsistency between the manual and the actual product, the actual product shall prevail.
• We are not liable for any loss caused by the operations that do not comply with manual.
• The manual would be updated according to the latest laws and regulations of related jurisdictions. For detailed information, refer to the paper manual, CD-ROM, OR code or our official website. If there is inconsistency between paper manual and the electronic version, the electronic  version shall prevail
• All the designs and software are subject to change without prior written notice. The product updates might cause some erences between the actual product and the manual. just contact the customer service for the latest program and Supplementary Documentation.
• There still might be deviation in technical data, functions, and operations description or errors in print. If there is any doubt or dispute, we reserve the Fight final explanation.
• Upgrade the reader software or try other mainstream reader software if the manual (in POF format) cannot be opened.
• All trademarks, registered trademarks, and the company names in the manual are the properties Of their respective owners.
• Please visit our website, contact the supplier or customer service if there is any problem occurring when using the device.
• If there is any uncertainty or controversy, we reserve the right of final explanation.

Support

Should you require any technical assistance please contact your Dahua distributor. If your questions cannot be answered immediately your distributor will forward your queries through the appropriate channels to ensure a rapid response. if you are connected to the internet, you can:

• Download user documentation and software updates.
• Search by product, category, or phrase.
• Report p ms to Dahua support staff by logging in to your private support area.
• Chat with Dahua support staff.
• Visit Dahua Suppor at www.dahuasecurity.com/support

Contact Information

ZHEJIANG DAHUA VISION TECHNOLOGY CO., LTD
Address: No.1199, Bin’an Road, Binjiang District, Hangzhou, P.R. China
Postcode: 31 0053
Tel· +86-571-876888″3
Fax: +86-571-87688815
Email: [email protected]
Website: www.dahuasecurity.com

Important Safeguards and Warnings

This Chapter describes the contents covering proper handling of the device, hazard prevent, on, and prevent, on of property damage Read these contents carefully before using the device, comply, with them when, using, and keep it well for future reference

Safety Instructions

The following categorized signal words with defined meaning might appear in the manual

in death or serious injury.
WARNING| Indicates a medium or low potential hazard which, if not avoided, could result in slight or moderate injury.
 CAUTION| Indicates a potential risk which, if not avoided, could result in property damage, data loss, lower performance, or unpredictable result.
|  Provides methods to help you solve a problem or save you tine
|  Provides additional information as the emphasis and supplement b the text.

Safety Requirement

• Abide by local electrical safety standards to ensure that the voltage is stable and complies with the power supply requirement of the device.
• Transport, use, and store the device under the allowed humidity and temperature conditions. Refer to the corresponding technical specifications of device for specific working temperature and humidity.
• Do not place the device in a location exposed to dampness, dust, extreme hot or cold, strong electronic radiation, or unstable lighting conditions.
• Do not install the device in a place near the heat source, such as radiator, heater, furnace, or other heat-generating devices to avoid fire.
• Prevent liquid from flowing into the device to avoid damage to internal components.
• Install the device horizontally or install on the stable place to prevent it from falling.
• Install the device in a well-ventilated place, and do not block the ventilation of the device.
• Do not disassemble the device arbitrarily
• Avoid heavy stress. violent vibration. and soaking during during transportation. storage. and installation Complete package is necessary during the transportation
• Use the factory package or the equivalent for transportation

Battery

Low battery power affects the operation of the RTC. causing ii to reset at every power-up. hen the battery needs replacing. a log message will appear in the product”s server report For more information about the server report. see the product’s setup pages or contact Dahua support

WARNING

• Risk of explosion if the battery is incorrectly replaced
• Replace only with an identical battery or a battery which 1s recommended by Dahua.
• Dispose of used batteries according to local regulations or the battery manufacturer’s instructions

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>