ThermoPro TP358 Bluetooth Humidity and Temperature Monitor User Manual
- June 6, 2024
- ThermoPro
Table of Contents
Bluetooth Humidity &Temperature Monitor
Model No. TP358
According to the operating system of your smartphone, scan the following QR
code to download and install.
(IOS ANDROID)
Introduction
Congratulations on your purchase of a Smart, Remote Bluetooth-connected Thermometer/hygrometer. You will now be able to remotely monitor the temperature and humidity of your living room, bedroom, greenhouse and etc. from your smartphone.
Features
- Temperature range: -4˚F to 140˚F (-20˚C to 60˚C)
- Temperature accuracy: +/-0.5˚F (+/-0.3˚C)
- Humidity range: 10% to 99%
- Humidity accuracy: +/- 2%
- Power source: 2 X AAA batteries (3V)
- 2.4GHZ wireless Bluetooth function, connect to the mobile app via Bluetooth module
- ˚F /˚C button: press it to toggle the temperature display unit between ˚F and ˚C
- button: press it to turn on/off the backlight
- Clock: AM/ PM 12:00 24:00,MO,TU,WE,TH,FR,SA,SU ;(APP)
Usage
Follow the simple steps below to set up your ThermoPro Bluetooth
Thermometer/Hygrometer and remotely monitor the temperature and humidity of
your living room, bedroom, greenhouse and etc. from your smartphone!
Step 1: Download and install the “ThermoPro Sensor“ App.
Scan the QR code above, or see rch for “ThermoPro Sensor” on the Apple Store
for IOS devices or on the Google Play Store for Android devices. Download the
app and install it on your smartphone.
iPhone and iPad apps for IOS 9.0 and above.
Android app for versions 4.4 and above.
*Android users need to allow all the requests about this app from the Android system.
Step 2: Enable Bluetooth on your smartphone under the smartphone Settings
section. If your smartphone has Bluetooth enabled, you can skip this step.
Step 3: Insert two AAA batteries into the battery compartment on the back
of the thermometer incorrect polarity (+) and (-) as indicated.
Step 4: The temperature and humidity will be displayed on the screen and
the Bluetooth icon **** will be flashing at the top of the display. The
Bluetooth icon ** will be flashing for 2 minutes which indicates that the
thermometer is ready for pairing to your mobile phone.
Step 5: Launch ThermoPro Sensor APP and press to add a thermometer. The
thermometers will be shown on a list and select one to pair. Once pairing is
complete, the Bluetooth icon ** on the thermometer display will stop
flashing and the current temperature and humidity will show on the APP. If the
Bluetooth icon stops flashing and you haven’t finished the pairing, press
and hold the button for 2 seconds and the **** will be flashing again
ready for pairing.
Done! Your ThermoPro Bluetooth Thermometer is ready for use!
Any questions or need more help with setup, please feel free to contact us.
Declaration of Conformity
Hereby, the manufacturer declares that this product with the basic requirements and applicable regulations of the Radio Equipment Directive 2014/53/EU, the EMC Directive 2014/30/EU. The complete declaration of conformity can be found at: https://itronicsmall.com/eu-declaration-of- conformity/ complies
Disposal of the electronic appliance
This electronic appliance should not be disposed of with normal household
waste.
Dispose of the unit at an approved facility or at your local recycling center. Please observe the current rules and regulations when disposing of the appliance. Contact your local council if in doubt.
Limited One-Year Warranty
ThermoPro warrants this product to be free of defects in parts, materials, and
workmanship for a period of one year, from the date of purchase.
Should any repairs or servicing under this warranty be required, contact
Customer Service by phone or email for instructions on how to pack and ship
the product to ThermoPro.
This warranty gives you specific legal rights and you may also have other
rights which vary from state to state.
Customer service
Telephone: 1-877-515-7797 (USA & Canada
only)
Email: service@buythermopro.com
Hours: Weekdays 8:00 AM- 8:00 PM EST(USA & Canada only)
FCC Warning
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.