Partron TXT-0120IP Tomorrow X Together Official Light Stick User Guide

Partron TXT-0120IP Tomorrow X Together Official Light Stick

Partron TXT-0120IP Tomorrow X Together Official Light Stick

1. Press the CAP HOOK on the handle to remove the BATTERY CAP.
2. Insert two batteries (AA) as shown in the diagram.
3. Replace the BATTERY CAP.

* Caution
Check to make sure the +/-positions are correct.
The contact without the spring is the + side, with the spring the -.

Using the Extendible Grip

1. Switching to use mode
   – Hold the area marked “A” and pull downwards.

2. Switching to portable mode
   – Press and hold the HOLD BUTTONS as shown in the diagram, then push the handle in until you hear a click.

Instructions for Use

1. Switching ON/OFF: press and hold BUTTON 2 tor 2 seconds.
2. Bluetooth Connection: press and hold BUTTON 3 for 2 seconds to search for a Bluetooth link.
3. Change Strobe Effect: press BUTTON 1 to change the strobe effect [slow> quick> flash]
4. Discover MOA: press BUTTON 3 to make your light stick and any light sticks nearby flash green for 2 seconds.
5. Together Mode: press and hold BUTTON 1 for 2 seconds.

[Fans in Together Mode can experience a mini control mode by changing the strobe effect and LED color] – BUTTON 1: change strobe effect [slow> quick> flash] – BUTTON 3: change LED color

• Once the light stick js in concert mode and has been paired with a smart phone, it will automatically be centrally controlled and the Together Mode and Discover MOA functions will be temporarily disabled.
• If you have trouble pairing your smart phone with the light stick, please visit the help desk [Pairing Booth] * For detailed instructions, please refer to the TOMORROW X TOGETHER Official Light Stick app.

Precautions

1. Avoid high temperature and high humidity, and keep at room temperature when storing.
2. Avoid looking directly at the LED light.
3. Please note that dropping the product or forcibly applying shock may affect LEO color.
4. Be careful not to swallow the parts or put them in your mouth.
5. Be careful not to give strong impact to the product or contact with water.
6. Stop using the product if it is damaged, and do not modify or disassemble the product.
7. Please use new battery when the battery life is over and remove the battery when it is not used for a long time.
8. Keep batteries out of the reach of children or infants, or dispose of them at the designated disposal site.
9. Always use genuine AA batteries and check+, – when inserting batteries. Failure to do so may result in product damage, burn and fire.
10. This product may be interrupted during wireless operation.

Product Warranty

1. This product is manufactured through strict quality control and inspection process.
2. We will repair the product during the warranty period if the product breaks down under normal usage.
3. Be sure to present this warranty when requesting repair.
4. Warranty is valid only in Korea.
5. The warranty period is three months from the date of purchase.

• Consumer negligence and malfunction are not covered by repair service.

Customer Paid Repair

1. If the warranty period has expired.
2. In case of malfunction or damage due to negligence or negligence in use.
3. Failure due to natural disasters such as flood, fire or earthquake.
4. If you want to replace the case with scratches during use.
5. Any use of customer center other than the official customer center, or any disassembly, repair or modification of the product

Product Specification

NAME | TOMORROW X TOGETHER OFFICIAL LIGHT STICK
SIZE | 239 X 100 X 50 (mm)
WEIGHT | Approximately 1509
MATERIAL | PC, TPU
COMPONENTS | Light Stick, Straps, Nonwoven bags., User manual, Quality Guarantee Card
POWER   | 2 Alkaline AA Batteries (Recommended), DC 3V ⎓
CERTIFICATIONS | 2ADSKTXT-01201P
OPERATION TEMPERATURE | -l0°C to S0°C (14 °F to l22°F)

Customer Service Center | Big Hit IP Co., Ltd. ( 02-3qqq-01os |light- stick.support@bighitcorp.com )
Warranty period | 3 Month from Date of Purchase [Receipt Authentication Required]

This device can be operated in at least one Member State without infringing applicable requirements on the use of radio spectrum.
This equipment has been t ested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

This device comply with partlS of FCC rules.
Operation is subject to the following two conditions:

• This device may not cause harmful interference.
• This device & its accessories must accept any interference received, including interference that may cause undesired operation.

Part15.21 statement
Changes or modifications not expressly approved by the manufacturer (or party responsible) for compliance could void the user’s authority to operate the equipment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>